Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: arm_mpcore
Installed-Size: 22040
Filename: ahcpd_0.53-3_arm_mpcore.ipk
Size: 22909
SHA256sum: 61d99026e6bc5d7fdd702c160abc5cb72c286a2018d68270a53c66440604b6c9
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2023.1-1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
Architecture: arm_mpcore
Installed-Size: 25071
Filename: alfred_2023.1-1_arm_mpcore.ipk
Size: 26144
SHA256sum: 2c36711a6a8af6c56a498e13eb3cc00e40a3027e61af08587152bb9f29adbbca
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: arm_mpcore
Installed-Size: 3792
Filename: babel-pinger_0.1-1_arm_mpcore.ipk
Size: 4578
SHA256sum: 1ca30576ba0c81c113f8e6b1335672aad30ab609555f5733db810540ebb2f4cc
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-1
Depends: libc, libubus20230605, libubox20230523
License: MIT
Section: net
Architecture: arm_mpcore
Installed-Size: 62773
Filename: babeld_1.13.1-1_arm_mpcore.ipk
Size: 63915
SHA256sum: 4bf87d0760c57a09972813f036fba14173056f3bde48172f19f4d9272883069c
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_mpcore
Installed-Size: 42207
Filename: batctl-default_2023.1-3_arm_mpcore.ipk
Size: 43185
SHA256sum: af7f788589a3a5b2588533dfa16c34689dc11452f34594df4350c7131b217fb5
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_mpcore
Installed-Size: 49535
Filename: batctl-full_2023.1-3_arm_mpcore.ipk
Size: 50515
SHA256sum: 501e751f50bd4b3f32a905d47fa13d03903370eae5b06fe9ea96ad050e49cc28
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_mpcore
Installed-Size: 13752
Filename: batctl-tiny_2023.1-3_arm_mpcore.ipk
Size: 14725
SHA256sum: 47c3f05e9c3b361da476cb143a4f5a1ad8ab607b22f4570322d809af976fed5c
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: arm_mpcore
Installed-Size: 42371
Filename: batmand_1440-1_arm_mpcore.ipk
Size: 43187
SHA256sum: d7b1486abd7b080bab8020b64326082efdfab201df693eefbc5ff817a982fd42
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird1-ipv4-uci
Version: 0.3-5
Depends: libc, libuci20130104, uci, bird1-ipv4
License: GPL-3.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 6833
Filename: bird1-ipv4-uci_0.3-5_arm_mpcore.ipk
Size: 7864
SHA256sum: a49815695318c341a1d464e30a34696f6c00642e8324e34e41c14da5a116233e
Description:  The BIRD UCI module (v1.6) (IPv4)

Package: bird1-ipv4
Version: 1.6.8-2
Depends: libc, libpthread
Conflicts: bird4
License: GPL-2.0
Section: net
Architecture: arm_mpcore
Installed-Size: 199571
Filename: bird1-ipv4_1.6.8-2_arm_mpcore.ipk
Size: 200727
SHA256sum: c6d547dc33e9d94389143830fd4e68b098e4b452bad10a719c49edbe0de7665b
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1-ipv6-uci
Version: 0.3-5
Depends: libc, libuci20130104, uci, bird1-ipv6
License: GPL-3.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 6005
Filename: bird1-ipv6-uci_0.3-5_arm_mpcore.ipk
Size: 6966
SHA256sum: 5ddb5309ede456c6c5aef04aec33a5004f114423968eb3a2596d245b240131bf
Description:  The BIRD UCI module (v1.6) (IPv6)

Package: bird1-ipv6
Version: 1.6.8-2
Depends: libc, libpthread
Conflicts: bird6
License: GPL-2.0
Section: net
Architecture: arm_mpcore
Installed-Size: 228901
Filename: bird1-ipv6_1.6.8-2_arm_mpcore.ipk
Size: 230002
SHA256sum: 3d08797cc5933e1708f1c7028b446d06bc3ba776d44d3b744781394e91de3b36
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1c-ipv4
Version: 1.6.8-2
Depends: libc, libreadline8, libncurses6, bird1-ipv4
Conflicts: birdc4
License: GPL-2.0
Section: net
Architecture: arm_mpcore
Installed-Size: 8573
Filename: bird1c-ipv4_1.6.8-2_arm_mpcore.ipk
Size: 9779
SHA256sum: 04a841787577ffd9daae9baeb838d603f8574509662a990e40ef565ed50fc709
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1c-ipv6
Version: 1.6.8-2
Depends: libc, libreadline8, libncurses6, bird1-ipv6
Conflicts: birdc6
License: GPL-2.0
Section: net
Architecture: arm_mpcore
Installed-Size: 8654
Filename: bird1c-ipv6_1.6.8-2_arm_mpcore.ipk
Size: 9863
SHA256sum: 4c4d93cca1943259ede0fb9839cf54f6cf2b22d1fbbd1c5187d749074ad5b8ca
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1cl-ipv4
Version: 1.6.8-2
Depends: libc, bird1-ipv4
Conflicts: birdcl4
License: GPL-2.0
Section: net
Architecture: arm_mpcore
Installed-Size: 7899
Filename: bird1cl-ipv4_1.6.8-2_arm_mpcore.ipk
Size: 9009
SHA256sum: e7ebf547277bbd9f125981f39a844672dfa5cba39989e94e4d9dac76898eb305
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird1cl-ipv6
Version: 1.6.8-2
Depends: libc, bird1-ipv6
Conflicts: birdcl6
License: GPL-2.0
Section: net
Architecture: arm_mpcore
Installed-Size: 7970
Filename: bird1cl-ipv6_1.6.8-2_arm_mpcore.ipk
Size: 9078
SHA256sum: 05f7870c6efd59485c501fb74f40e781336db33e34b29ddfdbabaea43f9cf1f7
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird2
Version: 2.15.1-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 388396
Filename: bird2_2.15.1-1_arm_mpcore.ipk
Size: 387308
SHA256sum: 377be824360e4321f84117da8c4de7566cb48fd1580d8b02440b2163dd8facdf
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 9328
Filename: bird2c_2.15.1-1_arm_mpcore.ipk
Size: 10452
SHA256sum: 02bc739e495a45b084f18d02ac0af2b3872df8df69b3870b1689bc2ec29ba48f
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 7990
Filename: bird2cl_2.15.1-1_arm_mpcore.ipk
Size: 9049
SHA256sum: becd33c3fa9401149055fa682d3327d3b2ca00446ef424170fb515a48b2781cb
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 4010
Filename: bmx7-iwinfo_7.1.1-5_arm_mpcore.ipk
Size: 4770
SHA256sum: cf699e3fbb0cf9b7b2148520cbb6f35fb08d0c1057cc3404a551e5df5e350db2
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 7710
Filename: bmx7-json_7.1.1-5_arm_mpcore.ipk
Size: 8516
SHA256sum: 4da9c7c8d73e89231448ff99f9d5895aa4e4176b9c9aeb06cae9d57c05e08d59
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 5408
Filename: bmx7-sms_7.1.1-5_arm_mpcore.ipk
Size: 6160
SHA256sum: 8453999258ba572c74666d8f00429e24409101563426078126224bb0f54cfab5
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 9631
Filename: bmx7-table_7.1.1-5_arm_mpcore.ipk
Size: 10401
SHA256sum: c1337ec892c162e3abdf262e41aca02bd14bb3aedf864cd92bc634bc0f97f334
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 5035
Filename: bmx7-topology_7.1.1-5_arm_mpcore.ipk
Size: 5755
SHA256sum: c284cdd4ee8d94fa7ad88a156860fe051df5c69d764ee108f8f27ae6dbebe841
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 26165
Filename: bmx7-tun_7.1.1-5_arm_mpcore.ipk
Size: 26836
SHA256sum: 52a6490acdffb3cff63fd9a91967a28949f0458f5833854301a622cbd39ba421
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 8081
Filename: bmx7-uci-config_7.1.1-5_arm_mpcore.ipk
Size: 8890
SHA256sum: 23b0342048be6f326afc646d47a97f88aa9969de1793d3797fa3e30da00a24c4
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-5
Depends: libc, zlib, libmbedtls12, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 176104
Filename: bmx7_7.1.1-5_arm_mpcore.ipk
Size: 176805
SHA256sum: 974a6c65577e5e1d66c2f36a573418dd635bf4139b0777770a386cf2878aee33
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: v21.1-4
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 345057
Filename: cjdns-tests_v21.1-4_arm_mpcore.ipk
Size: 345210
SHA256sum: a81b6491098a283a54c310d6f0fc36fabfd2750ae3a0c85f4404cf34d6f779f8
Description:  cjdns test cases

Package: cjdns
Version: v21.1-4
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 398872
Filename: cjdns_v21.1-4_arm_mpcore.ipk
Size: 399319
SHA256sum: 84f099c0e6e4dac6c9a9f5ffb97334bc3fd5e251dabfd67c221df3f40d66493f
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: arm_mpcore
Installed-Size: 545
Filename: hnet-full-l2tp_2018-12-21-c4376661-1_arm_mpcore.ipk
Size: 1391
SHA256sum: dd0009f84dfadd69aab6861cfde0ae345c94f5f6e3d68bacaa578ee1ed12aee1
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: arm_mpcore
Installed-Size: 95
Filename: hnet-full-secure_2018-12-21-c4376661-1_arm_mpcore.ipk
Size: 921
SHA256sum: 8adc19ed54982537731501fbff18c2290f78b9ee3251320570660c01a28567d1
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: arm_mpcore
Installed-Size: 95
Filename: hnet-full_2018-12-21-c4376661-1_arm_mpcore.ipk
Size: 910
SHA256sum: 96aaf3ab045c918869b421683a2905e1e7599ff7d1194bc820439b252d22ab6e
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
Architecture: arm_mpcore
Installed-Size: 93768
Filename: hnetd-nossl_2018-12-21-c4376661-1_arm_mpcore.ipk
Size: 94636
SHA256sum: ba071f348ffa654ed4314f5df27ca5123ff6693c7776ac1291975576d946a86f
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
Architecture: arm_mpcore
Installed-Size: 103563
Filename: hnetd-openssl_2018-12-21-c4376661-1_arm_mpcore.ipk
Size: 104484
SHA256sum: 395be5b60178cd1b2fd7ceb8b8981017c8c32d6f912e55a746dd8474578eb3c8
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-bird1-ipv4
Version: 0.3-5
Depends: libc, luci-base, luci-compat, bird1-ipv4-uci
License: GPL-3.0-or-later
Section: luci
Architecture: arm_mpcore
Installed-Size: 7426
Filename: luci-app-bird1-ipv4_0.3-5_arm_mpcore.ipk
Size: 8238
SHA256sum: 9cdeb2866f9027b7481d9e11762780abced97caf711fdaead7317871a4b70f20
Description:  LuCI support for BIRD (v1.6) (IPv4)

Package: luci-app-bird1-ipv6
Version: 0.3-5
Depends: libc, luci-base, luci-compat, bird1-ipv6-uci
License: GPL-3.0-or-later
Section: luci
Architecture: arm_mpcore
Installed-Size: 7471
Filename: luci-app-bird1-ipv6_0.3-5_arm_mpcore.ipk
Size: 8279
SHA256sum: bbfb3536e2e301b53ae6ff1a821ba7a2c00cc1630ede0e89188d949c5b2ad5fc
Description:  LuCI support for BIRD (v1.6) (IPv6)

Package: luci-app-cjdns
Version: 1.3-9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
Architecture: arm_mpcore
Installed-Size: 5672
Filename: luci-app-cjdns_1.3-9_arm_mpcore.ipk
Size: 6557
SHA256sum: 70bfcc5378e920e25b354124e1f45fa06d3591f31ad69109306af435ac46586b
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018-12-21-c4376661-1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: arm_mpcore
Installed-Size: 56782
Filename: luci-app-hnet_2018-12-21-c4376661-1_arm_mpcore.ipk
Size: 57619
SHA256sum: ab4ae80c2441c630509a91a1914fec35b89bc6dafacc2f5e4ca8cccde92e85e9
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-14
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 6974
Filename: luci-app-olsrd2_0.2.6-14_all.ipk
Size: 7849
SHA256sum: c42bcb44b60e7eae2b68325fcee2c9eb3cb50e193742e6a38d5567f3787ec5a8
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017-08-24-93b5ace4-9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 121218
Filename: mcproxy_2017-08-24-93b5ace4-9_arm_mpcore.ipk
Size: 122159
SHA256sum: 3078feba4cfd440e81ea4023e5838c0a3bcea0aab4427bc51b0884dd6c6032f2
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 4.1.1-1
Depends: libc
License: GPL-2.0-or-later
Section: net
Architecture: all
Installed-Size: 24095
Filename: mesh11sd_4.1.1-1_all.ipk
Size: 25641
SHA256sum: bb4e85e5f1486d195e36d7af2cf7e021505b63c3561398525d9bdab880984df0
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014-12-12-2d6d1b0b-7
Depends: libc, libubox20230523
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 6183
Filename: minimalist-pcproxy_2014-12-12-2d6d1b0b-7_arm_mpcore.ipk
Size: 7246
SHA256sum: 6be25097d6456d2fa38a3698414bd7770b7a51dfc6c3ab69cde0f61c06f027f5
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 1942
Filename: naywatch_1-7_all.ipk
Size: 2852
SHA256sum: 4e38389949c262fb77b141fa488f7a6ae4c8ea6a1321352641d18a1c62c4dd63
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 31469
Filename: ndppd_0.2.5-2_arm_mpcore.ipk
Size: 32366
SHA256sum: 003089fd779d3d0cbb101a303684119f2da8405405009befb5b1f7dbdb522fa8
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 46628
Filename: nodogsplash_5.0.2-1_arm_mpcore.ipk
Size: 47615
SHA256sum: a7e8092f97f6e005874d605793ec12de5f56fe596bd4999fde1b391bf90d1a69
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox20230523, mdnsd
License: GPL-2.0-only
Section: net
Architecture: arm_mpcore
Installed-Size: 10262
Filename: ohybridproxy_2020-05-22-0dfef1eb-3_arm_mpcore.ipk
Size: 11126
SHA256sum: d348cfd0b59c6342a8296c201de2e446bd1e0237c496f12fb02a1993f0cd70bf
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 1970
Filename: olsrd-mod-arprefresh_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 2738
SHA256sum: 0b63e7527d7f3e3d9aa5742f5f2cdeac8b4c93af99acd85077fff4c0985c0c3a
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 12163
Filename: olsrd-mod-bmf_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 12953
SHA256sum: 01dbaa1544c12cbf75c7aea8259473760bdd54611c7bc929960ab8e168714708
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 3789
Filename: olsrd-mod-dot-draw_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 4530
SHA256sum: 901d34865a5f3f132fef10243fb7999af17808dd04a1c71331ed5894a72a1e98
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 2306
Filename: olsrd-mod-dyn-gw-plain_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 3045
SHA256sum: fa96e67753556cec3197e186944a4a6a2cbff52860ee23eb1f936f12e0e6931e
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 3989
Filename: olsrd-mod-dyn-gw_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 4726
SHA256sum: 5993038985ff56eafbded87595c68e348b1807fe8dbdbe3688c386acf5bec778
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 2525
Filename: olsrd-mod-filtergw_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 3261
SHA256sum: 7a24e3793ee8c42baf03bc234b164c3589b2dbde598c8e22dcb62b27c7d61a4e
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 32753
Filename: olsrd-mod-httpinfo_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 33598
SHA256sum: 5323e18c1e281d5c02b2d601f786cf756a85b9288877353272ecb3d8f9e074b7
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 24639
Filename: olsrd-mod-jsoninfo_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 25376
SHA256sum: 3c8e000a9fd9e486f3f1bb3deb93e0748cee8ea57c8b891e626ee16ce11e07ca
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 9072
Filename: olsrd-mod-mdns_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 9851
SHA256sum: 40c19137dbaa25efa822aa39370c38efa98b79729be81085b4631b112e3dabd5
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 10916
Filename: olsrd-mod-nameservice_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 11701
SHA256sum: 2a9a4ec0a68218ec5fb190302c6f437d7b02df988172f7af318c79ee5ef6ddad
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 13728
Filename: olsrd-mod-netjson_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 14450
SHA256sum: b95b0063b378b40999b82a5f319bf63b64f714016daaaaca4c5e7d06f1856296
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 8277
Filename: olsrd-mod-p2pd_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 9076
SHA256sum: 927794173736a3e26df51d87d010eda4eaffaa0763330d9a9a5260a87f1b3a3f
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 2875
Filename: olsrd-mod-pgraph_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 3618
SHA256sum: 7a8e1cd6edb48d2ef3e1775b167999cadbfcf8a437e524e9bde22b2afef92ede
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 61146
Filename: olsrd-mod-pud_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 61879
SHA256sum: d3b52199e60d7c078dd9ddc92763d6d05d994f97e586159abcf5cb5e9a8104eb
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 6099
Filename: olsrd-mod-quagga_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 6836
SHA256sum: 152efeb5c243def7e2a0fae3cbdb0b48cafa795eadf3d27e8030941a5847050a
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 10380
Filename: olsrd-mod-secure_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 11185
SHA256sum: 80518ff252ae5483cc9a8963cecbf952600e84e8e7e2abfe20f8afe272c18690
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 4268
Filename: olsrd-mod-sgwdynspeed_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 5049
SHA256sum: 81ae2c8dd5e9ea27af8cde1a09954ab9c98f2ea9f30f8618bed8dbac2f483e5f
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 15804
Filename: olsrd-mod-txtinfo_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 16539
SHA256sum: 9e620d0b8082c1f38fa1814d810193e3063615f74e19dad141f32456bfaeea5f
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 1570
Filename: olsrd-mod-watchdog_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 2328
SHA256sum: e210db6df8178ea947bf862f21c83f363cc6db9cbfd5c59705a0e0a402cea4b7
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 1181
Filename: olsrd-utils_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 1927
SHA256sum: 69a6479e92a65665be495179b78d20af083d450370ba40c49167895751325866
Description:  Utils for OLSRD

Package: olsrd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, libpthread, libubus20230605, iptables, ip6tables
License: BSD-3-Clause
Section: net
Architecture: arm_mpcore
Installed-Size: 141279
Filename: olsrd_2023-06-12-a9b3f1ac-1_arm_mpcore.ipk
Size: 141871
SHA256sum: 2fb7439088c550b29a61cbd2e98978c699ea29916ec46d93f28b71d92576b77b
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_mpcore
Installed-Size: 162220
Filename: oonf-dlep-proxy_2022-08-25-fb15d54d_arm_mpcore.ipk
Size: 163031
SHA256sum: 92ff67ea0b120faf11b73c32dcfa18c433d436272d586e762aa1cad61d388c55
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_mpcore
Installed-Size: 158031
Filename: oonf-dlep-radio_2022-08-25-fb15d54d_arm_mpcore.ipk
Size: 158752
SHA256sum: cd9c3a8439bc508268f4eb0cb2b728afb1d1ad23641660e0eb145db0573da339
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: arm_mpcore
Installed-Size: 1544
Filename: oonf-init-scripts_0.9.1-r3_arm_mpcore.ipk
Size: 2273
SHA256sum: db019ccfc0d65dc72630c51dc32c3b67fdb69f4e2756f74f4857c1124d267938
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022-08-25-1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_mpcore
Installed-Size: 235706
Filename: oonf-olsrd2_2022-08-25-1cec9b21_arm_mpcore.ipk
Size: 236397
SHA256sum: 6a7fa6a296c04e96c00db084687ff8693f6a97fa821b7fcb8ccd134dd07a3264
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 163202
Filename: opennds_10.3.0-1_arm_mpcore.ipk
Size: 163044
SHA256sum: 49e0387059c74ae4fc0d4518492467e34f08977509bb163bb1a73714f3e296aa
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018-06-19-dbf4e591-4
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: arm_mpcore
Installed-Size: 83196
Filename: pimbd_2018-06-19-dbf4e591-4_arm_mpcore.ipk
Size: 84078
SHA256sum: 0474d979a7c986438624c363d77fcecb7ce0ae12b7f71d10c4f2f00d0963f83f
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: arm_mpcore
Installed-Size: 26901
Filename: prince_0.4-3_arm_mpcore.ipk
Size: 27850
SHA256sum: 9351ca820280ea2cf38b7ab2a552210c8757df049e4a1cfd0e4e5d2529173cf1
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: quagga-bgpd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 207819
Filename: quagga-bgpd_1.2.4-2_arm_mpcore.ipk
Size: 207723
SHA256sum: 464ff89f62a13f8052c6da19ec1479b5f9bc49b667888dc66beb015d57ff93de
Description:  BGPv4, BGPv4+, BGPv4- routing engine

Package: quagga-isisd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 93508
Filename: quagga-isisd_1.2.4-2_arm_mpcore.ipk
Size: 94086
SHA256sum: 8be02c79db1f90018eed7fec0f3101a1e61e72d0642d79600f3321561aaea6bb
Description:  IS-IS routing engine

Package: quagga-libospf
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 194850
Filename: quagga-libospf_1.2.4-2_arm_mpcore.ipk
Size: 193829
SHA256sum: c033b4013ed7bf8dc514bc2d5458a74845d7147b7e008647c96aaee7756cb47b
Description:  OSPF library

Package: quagga-libzebra
Version: 1.2.4-2
Depends: libc, quagga
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 132316
Filename: quagga-libzebra_1.2.4-2_arm_mpcore.ipk
Size: 131934
SHA256sum: 202cf5c9f2def51259c098657416c8a1f63b37850086b8db271ca4f9fd9b6959
Description:  zebra library

Package: quagga-ospf6d
Version: 1.2.4-2
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 90248
Filename: quagga-ospf6d_1.2.4-2_arm_mpcore.ipk
Size: 90944
SHA256sum: 7d6a4f4d93486d23733907e177611165c9585f6656e5ac308ef75f23f43cadeb
Description:  OSPFv3 routing engine

Package: quagga-ospfd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 3557
Filename: quagga-ospfd_1.2.4-2_arm_mpcore.ipk
Size: 4331
SHA256sum: c1875a48e277dfa546be1e9688f1010b2f2cdbdf24d1b8d5fe36d3e01a77e5ae
Description:  OSPFv2 routing engine

Package: quagga-ripd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 36452
Filename: quagga-ripd_1.2.4-2_arm_mpcore.ipk
Size: 36980
SHA256sum: 2a1d3db5c57402040aaf358ac81238542bd21ddbbd24af3d3c2ab161e2b32376
Description:  RIP routing engine

Package: quagga-ripngd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 29903
Filename: quagga-ripngd_1.2.4-2_arm_mpcore.ipk
Size: 30667
SHA256sum: 742145a7fcd8cc76693aa31775460f6e5e0769b9d799eb1e8a19e4bcb62fb08d
Description:  RIPNG routing engine

Package: quagga-vtysh
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra, libreadline8, libncurses6
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 124252
Filename: quagga-vtysh_1.2.4-2_arm_mpcore.ipk
Size: 124441
SHA256sum: 6c9792c1f005dd49b9f958ea7d38d031dc1790003ebf19121cb8e35bcb07c2d7
Description:  integrated shell for Quagga routing software

Package: quagga-watchquagga
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 11537
Filename: quagga-watchquagga_1.2.4-2_arm_mpcore.ipk
Size: 12244
SHA256sum: 5da8e6c6c03d38a4ff4c62a6a9c54ddabb010d88933170a6928cba9b7f94f247
Description:  Quagga watchdog

Package: quagga-zebra
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 89322
Filename: quagga-zebra_1.2.4-2_arm_mpcore.ipk
Size: 89754
SHA256sum: b6919ddade25b157b10206accdcc61a2336b4474bec7aa5dc0760ca33fe5cb29
Description:  Zebra daemon

Package: quagga
Version: 1.2.4-2
Depends: libc, librt
License: GPL-2.0-or-later
Section: net
Architecture: arm_mpcore
Installed-Size: 2380
Filename: quagga_1.2.4-2_arm_mpcore.ipk
Size: 3198
SHA256sum: 98917c1b501c01169e02d53e26af37e742d4cc618b87c0291894457fd2a45ae3
Description:  A routing software package that provides TCP/IP based routing services
 with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
 OSPFv3, BGP-4, and BGP-4+

Package: vis
Version: 2013-04-07-7710cce4-9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
Architecture: arm_mpcore
Installed-Size: 10305
Filename: vis_2013-04-07-7710cce4-9_arm_mpcore.ipk
Size: 11134
SHA256sum: af1d11352931aa6b03c6f6ae51a7c6bc8b7f0db3ebcbddc15a73c95f48244632
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox20230523
License: GPL-2.0-only
Section: net
Architecture: arm_mpcore
Installed-Size: 8130
Filename: zonestitcher_2020-05-22-0dfef1eb-3_arm_mpcore.ipk
Size: 9008
SHA256sum: b02e0ede57697a9fa1c2ed4cad67c23c6feaffaf23eaeb20939cbac46346d4a5
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.