Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 22851
Filename: ahcpd_0.53-3_mips_mips32.ipk
Size: 23555
SHA256sum: 4fc920849740b795e80631807323b799d8071085f7fe00ad479e585b5457f107
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2023.1-1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
Architecture: mips_mips32
Installed-Size: 26676
Filename: alfred_2023.1-1_mips_mips32.ipk
Size: 27546
SHA256sum: 3e392fd4ff58c1f19d57f38ea58c82ba9f37b1c1f0a8553cde3d998de1161f12
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: mips_mips32
Installed-Size: 3952
Filename: babel-pinger_0.1-1_mips_mips32.ipk
Size: 4610
SHA256sum: e709f9193d183163fab83030fb95e6de4f1dd1afd57725a6b6bdef812d127905
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-1
Depends: libc, libubus20230605, libubox20230523
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 63470
Filename: babeld_1.13.1-1_mips_mips32.ipk
Size: 64460
SHA256sum: 2fd2c564e0be1dbe4a26685cbab53227a6e8f9525346c55195eda40de245d5dd
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2023.1-2
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mips_mips32
Installed-Size: 41368
Filename: batctl-default_2023.1-2_mips_mips32.ipk
Size: 42005
SHA256sum: a519e1fc99a075c91e5e5d1ef52251b8dfa70c755f2103847b7f6c4dffc268ed
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2023.1-2
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mips_mips32
Installed-Size: 48948
Filename: batctl-full_2023.1-2_mips_mips32.ipk
Size: 49484
SHA256sum: f634ba294a38ce14c83e9b56f32bec88cd188b42a5d776dbe0dd6b7126bb56c5
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2023.1-2
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: mips_mips32
Installed-Size: 13542
Filename: batctl-tiny_2023.1-2_mips_mips32.ipk
Size: 14450
SHA256sum: 08d92f9c20a7dc393bf902a74d62824e9cdc1ba7d3b2ce112e1632b7a036830e
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 39308
Filename: batmand_1440-1_mips_mips32.ipk
Size: 39837
SHA256sum: a7e6208e4b8c1b438695b0f5ebf90dc8ce47ecfde8a0af117f105ba8a2baec84
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird1-ipv4-uci
Version: 0.3-5
Depends: libc, libuci20130104, uci, bird1-ipv4
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 6833
Filename: bird1-ipv4-uci_0.3-5_mips_mips32.ipk
Size: 7863
SHA256sum: 8152ffcdfc1c050463defb241185b764d8653cc0225383534b43356cd02d1bd0
Description:  The BIRD UCI module (v1.6) (IPv4)

Package: bird1-ipv4
Version: 1.6.8-2
Depends: libc, libpthread
Conflicts: bird4
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 209889
Filename: bird1-ipv4_1.6.8-2_mips_mips32.ipk
Size: 210559
SHA256sum: 827664427717493be37c1ebfcb3f2342caa8f1e7c22ccecef95e29c25d602462
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1-ipv6-uci
Version: 0.3-5
Depends: libc, libuci20130104, uci, bird1-ipv6
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 6005
Filename: bird1-ipv6-uci_0.3-5_mips_mips32.ipk
Size: 6967
SHA256sum: 4be925ef9d7061cbc8b182763cce40e41975460b5eff3704bbbf5757c4cc3bfd
Description:  The BIRD UCI module (v1.6) (IPv6)

Package: bird1-ipv6
Version: 1.6.8-2
Depends: libc, libpthread
Conflicts: bird6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 241468
Filename: bird1-ipv6_1.6.8-2_mips_mips32.ipk
Size: 241953
SHA256sum: 8ce3071b0c69d2c9ed10ea3dedcce31beab02c1622cdd0630dc5eeb08b10ac9f
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1c-ipv4
Version: 1.6.8-2
Depends: libc, libreadline8, libncurses6, bird1-ipv4
Conflicts: birdc4
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8971
Filename: bird1c-ipv4_1.6.8-2_mips_mips32.ipk
Size: 10018
SHA256sum: b5cc97de72c5b08c1548ba6410af0492a3027d9e3d0a57fe24b947f8fe4e0d03
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1c-ipv6
Version: 1.6.8-2
Depends: libc, libreadline8, libncurses6, bird1-ipv6
Conflicts: birdc6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 9028
Filename: bird1c-ipv6_1.6.8-2_mips_mips32.ipk
Size: 10073
SHA256sum: 7ca185ca2e49cbc9a22da86889132cacb7b3cc3580d82458f5dd79d61d847473
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1cl-ipv4
Version: 1.6.8-2
Depends: libc, bird1-ipv4
Conflicts: birdcl4
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8326
Filename: bird1cl-ipv4_1.6.8-2_mips_mips32.ipk
Size: 9325
SHA256sum: 96563e414e235b653fe339531991f3f93373880765ae1cc76e47b1faf9c94ed9
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird1cl-ipv6
Version: 1.6.8-2
Depends: libc, bird1-ipv6
Conflicts: birdcl6
License: GPL-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 8410
Filename: bird1cl-ipv6_1.6.8-2_mips_mips32.ipk
Size: 9405
SHA256sum: f7899fe20230932550021c540215078f69091ed2eeae39d1523be16f2915d398
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird2
Version: 2.15.1-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 401112
Filename: bird2_2.15.1-1_mips_mips32.ipk
Size: 399735
SHA256sum: 3adb1d4bcd90eb0b1b7117e292e4fe1876de6162b28dd55226de3c0c22927b96
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 9573
Filename: bird2c_2.15.1-1_mips_mips32.ipk
Size: 10529
SHA256sum: e2444ecd1440ef8d5697523881a9baa4321c4ee306c54c5618d85959e871e9cd
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 8318
Filename: bird2cl_2.15.1-1_mips_mips32.ipk
Size: 9203
SHA256sum: debbec412edc1f6829f307da9be7432e1e0447f2fc539bc145d357ef64f67de0
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 4019
Filename: bmx7-iwinfo_7.1.1-5_mips_mips32.ipk
Size: 4646
SHA256sum: b3583e5b2be4f2098b47d154851f282b261405bcc63dd28b500fc4b9deb6a7db
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 7986
Filename: bmx7-json_7.1.1-5_mips_mips32.ipk
Size: 8668
SHA256sum: 43c550dc747529199451077c2b5c175b0f3f00b9401ad1f4e57987911954c98f
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 5561
Filename: bmx7-sms_7.1.1-5_mips_mips32.ipk
Size: 6132
SHA256sum: 843a9cabd1f49c2be8949c62e030d8d5b90d6b76823943b3962eeb3e2030fa4c
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 9487
Filename: bmx7-table_7.1.1-5_mips_mips32.ipk
Size: 10146
SHA256sum: e63f63352b772ebc2003f9caca92f5d3b2b76c8853c36e4122cf1924f5cc5b48
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 5111
Filename: bmx7-topology_7.1.1-5_mips_mips32.ipk
Size: 5675
SHA256sum: 1049e569cf0c70450b1e9f240660e9006b5f1fcdc0744e935ec3d270c925a952
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 25296
Filename: bmx7-tun_7.1.1-5_mips_mips32.ipk
Size: 25944
SHA256sum: b9dc005340667145ad2e148ebb8a59596a1f7a0e1b51a8c8f55bb54eca241259
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 8087
Filename: bmx7-uci-config_7.1.1-5_mips_mips32.ipk
Size: 8812
SHA256sum: 98e6827fdab2c621d66b13fa3e3c2056174566950d99fb3c8b35b6b69c5a49ae
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-5
Depends: libc, zlib, libmbedtls12, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 179238
Filename: bmx7_7.1.1-5_mips_mips32.ipk
Size: 179514
SHA256sum: fb7ce6d39f085c8cebb7d3824412e82d64d3dd73c22404d93cbfec23e4e2752f
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: v21.1-4
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 378648
Filename: cjdns-tests_v21.1-4_mips_mips32.ipk
Size: 377709
SHA256sum: 7c216f020712e1a6064059203f6701b9d05c9213a7d88b5e0cd19ad691856281
Description:  cjdns test cases

Package: cjdns
Version: v21.1-4
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 456867
Filename: cjdns_v21.1-4_mips_mips32.ipk
Size: 456424
SHA256sum: 44d51fa3c89ce2507beec0af37a7e27246efb765ad904dc9751a70b36addb675
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 545
Filename: hnet-full-l2tp_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 1387
SHA256sum: 018db7f526056740c21a835c2fd82ed89a952bf2ac610d77a5a32105d44bdae8
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 95
Filename: hnet-full-secure_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 923
SHA256sum: 90a43f63570e2dea831b88a44fd4458ac48faed763b19dd6c1e38a188302dcb7
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 95
Filename: hnet-full_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 907
SHA256sum: 95da52364110167577ed347709355673866130c76f6e892d887e360b4644de86
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 95828
Filename: hnetd-nossl_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 96356
SHA256sum: c976501b7814fc9f99bee19c7b5f5f51a5ea11f7014c5f84ef427b9e40b43ab3
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 106609
Filename: hnetd-openssl_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 106489
SHA256sum: 46b373db6e08558d7ac7736a2d37db245ea8e30cd38a116c5f2b56df32035b39
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-bird1-ipv4
Version: 0.3-5
Depends: libc, luci-base, luci-compat, bird1-ipv4-uci
License: GPL-3.0-or-later
Section: luci
Architecture: mips_mips32
Installed-Size: 7426
Filename: luci-app-bird1-ipv4_0.3-5_mips_mips32.ipk
Size: 8238
SHA256sum: 3fa31422b1b834636414f24bbbfeed310dff8414b5fc5bcfcb02d45afb980fa2
Description:  LuCI support for BIRD (v1.6) (IPv4)

Package: luci-app-bird1-ipv6
Version: 0.3-5
Depends: libc, luci-base, luci-compat, bird1-ipv6-uci
License: GPL-3.0-or-later
Section: luci
Architecture: mips_mips32
Installed-Size: 7471
Filename: luci-app-bird1-ipv6_0.3-5_mips_mips32.ipk
Size: 8278
SHA256sum: 49568db7c6ae6dccec7834b96dc72c2d321285d8cceea5087bbac242cfdea154
Description:  LuCI support for BIRD (v1.6) (IPv6)

Package: luci-app-cjdns
Version: 1.3-9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
Architecture: mips_mips32
Installed-Size: 5672
Filename: luci-app-cjdns_1.3-9_mips_mips32.ipk
Size: 6557
SHA256sum: 9edd5a77c771bfd395503773b778e693a62ddc2146bbe26a840747eb58f3cc46
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018-12-21-c4376661-1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mips_mips32
Installed-Size: 56782
Filename: luci-app-hnet_2018-12-21-c4376661-1_mips_mips32.ipk
Size: 57617
SHA256sum: 4df9e71e4f03b9e75031b399c5081a5cdd795a9b4a68f91382e1e58f04056e30
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-14
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 6974
Filename: luci-app-olsrd2_0.2.6-14_all.ipk
Size: 7849
SHA256sum: c42bcb44b60e7eae2b68325fcee2c9eb3cb50e193742e6a38d5567f3787ec5a8
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017-08-24-93b5ace4-9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 122244
Filename: mcproxy_2017-08-24-93b5ace4-9_mips_mips32.ipk
Size: 122496
SHA256sum: b96fbea17cf4c8939d66b31be3ea12be49e62770f32eeec61a577ed19835140f
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 4.1.1-1
Depends: libc
License: GPL-2.0-or-later
Section: net
Architecture: all
Installed-Size: 24095
Filename: mesh11sd_4.1.1-1_all.ipk
Size: 25641
SHA256sum: bb4e85e5f1486d195e36d7af2cf7e021505b63c3561398525d9bdab880984df0
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014-12-12-2d6d1b0b-7
Depends: libc, libubox20230523
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 6563
Filename: minimalist-pcproxy_2014-12-12-2d6d1b0b-7_mips_mips32.ipk
Size: 7561
SHA256sum: e32d95701a50d568998c0e4d0d41b0d16646d57bd6f6b489491edc12d63abea8
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 1942
Filename: naywatch_1-7_all.ipk
Size: 2852
SHA256sum: 4e38389949c262fb77b141fa488f7a6ae4c8ea6a1321352641d18a1c62c4dd63
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 31248
Filename: ndppd_0.2.5-2_mips_mips32.ipk
Size: 31732
SHA256sum: 220a646a7d4d6f42c6f21de0a3d9f56df908771c4a83e0607670788d4f3b5d81
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 45729
Filename: nodogsplash_5.0.2-1_mips_mips32.ipk
Size: 46150
SHA256sum: ca7d48ec8cf1c6c133cafe0f51749f0b60f4aa682aad0c63cc84a5e9c3db0b7d
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox20230523, mdnsd
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 11046
Filename: ohybridproxy_2020-05-22-0dfef1eb-3_mips_mips32.ipk
Size: 11782
SHA256sum: 79b3813bda64ae10bfb5569f641f2a349aab26c230ab546ad67f10f3cffe9b6c
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2027
Filename: olsrd-mod-arprefresh_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 2660
SHA256sum: 18b365b7c1fa0816b38809f88cfb7254f1810f5b7b824ac2add72707c554b79c
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 12113
Filename: olsrd-mod-bmf_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 12820
SHA256sum: 16da1b393381e7a66f3c2feaaa705dd9b57177c306d5e1ab691e5b988eba9b7b
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 3804
Filename: olsrd-mod-dot-draw_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 4409
SHA256sum: 622d8f99ce5996b9ea305c722c8a4242da7fdf0c336864e0f7ff4a8db2b73e1c
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2391
Filename: olsrd-mod-dyn-gw-plain_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 3027
SHA256sum: 89ad6a52f92fbc9a9dd7dc7aedb8e93fa0bddbbb36c9a0758b3c952b81e2146a
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 4225
Filename: olsrd-mod-dyn-gw_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 4823
SHA256sum: 4226c8a523d1e9674a1c6f0a5cfdc1e324dd9b7bc0341eb0c88848c5cab81aea
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2577
Filename: olsrd-mod-filtergw_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 3206
SHA256sum: e8ee4d2b9a7e0c1d261e31b32f1d9ded0c477c74eac9e3ee41ab65ead846b541
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 31270
Filename: olsrd-mod-httpinfo_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 31789
SHA256sum: bef7317516557eebc51f344d4f7760ef46ddf65b78b7557bc47ad4a3358d5576
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 23085
Filename: olsrd-mod-jsoninfo_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 23812
SHA256sum: 6d4190419fc2f25ce81e4d8325f1c2ce268444038a713a25ab4a2238af047fd3
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 8830
Filename: olsrd-mod-mdns_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 9481
SHA256sum: 26538ff0371d612c56082b3dde6fe2d1bc516cbc02da61dcfdc47585cc4c299a
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 11424
Filename: olsrd-mod-nameservice_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 12012
SHA256sum: 79dcebdaad44a70d96cfdf42732e999794c6c3bdf11616ea4bab42fdf34b1c50
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 13213
Filename: olsrd-mod-netjson_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 13825
SHA256sum: 0b24c2a877624003a2e62e991bb1b7797f9d8addf222b510aa3f27270aaff5af
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 8578
Filename: olsrd-mod-p2pd_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 9225
SHA256sum: 0850434560145842cb0c87f8292b6b46b26da984b366d4e02f02d4c5b0e7b180
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 2964
Filename: olsrd-mod-pgraph_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 3597
SHA256sum: 1e8df908e97f5221cbf8590900c0461a1f50a843552d6ad226a7bec074ad855a
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 62901
Filename: olsrd-mod-pud_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 63374
SHA256sum: 677438626dfd1082e07bca42afcf9289d3ca857415d5aa4241ad1821d2a9ece0
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 6228
Filename: olsrd-mod-quagga_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 6950
SHA256sum: 3298ed5934c74589e1f7907a7c218d8eff2a7d1f5b2fc4f911de53af00ae79c7
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 10293
Filename: olsrd-mod-secure_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 10969
SHA256sum: 8c93c9cebfbe1abf1c09c902840171ce1a05295c548cf845e95a30aa1b9fefac
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 4515
Filename: olsrd-mod-sgwdynspeed_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 5164
SHA256sum: 4d071b10cc9a59ac0c2628480be976b53eca7837af4555746dd3f484706d3e34
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 15003
Filename: olsrd-mod-txtinfo_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 15616
SHA256sum: 3ed10187a8894151beb90c0d948d6bfb1a98a7dadd3e783f9d254411965b9590
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 1705
Filename: olsrd-mod-watchdog_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 2380
SHA256sum: 7168f02fc0544faad8338ea68d2d48f75ab1896d22f8cdb1ec67db63e94a9cbc
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 1181
Filename: olsrd-utils_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 1930
SHA256sum: d9b0cbdd58475de65f38c47b5a0724c175bd531c17edcc589b8755a01d7d7a53
Description:  Utils for OLSRD

Package: olsrd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, libpthread, libubus20230605, iptables, ip6tables
License: BSD-3-Clause
Section: net
Architecture: mips_mips32
Installed-Size: 140481
Filename: olsrd_2023-06-12-a9b3f1ac-1_mips_mips32.ipk
Size: 141133
SHA256sum: 4a33db257101bf07d7aa71ca9de0925d2f631456975666828a930b2bdcd797ff
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips_mips32
Installed-Size: 159799
Filename: oonf-dlep-proxy_2022-08-25-fb15d54d_mips_mips32.ipk
Size: 160283
SHA256sum: 17d13318b5e6c6a2d688c698ef9047acfb90ef84137e3fafdb0b400074ca8a66
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips_mips32
Installed-Size: 155814
Filename: oonf-dlep-radio_2022-08-25-fb15d54d_mips_mips32.ipk
Size: 156143
SHA256sum: ae588c512d1f86d7d3e5178589fa922e25e0eef7e1fcc03022c65249cd8fa060
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: mips_mips32
Installed-Size: 1544
Filename: oonf-init-scripts_0.9.1-r3_mips_mips32.ipk
Size: 2277
SHA256sum: 7bfb0f070828d6890bcca90faaa20a21a0275411b42fd88e08a3f82c67e61104
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022-08-25-1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: mips_mips32
Installed-Size: 232803
Filename: oonf-olsrd2_2022-08-25-1cec9b21_mips_mips32.ipk
Size: 233054
SHA256sum: 2f51c224ce312440a27bc94a8045b4a6dee105de84e6a436a3376e777683b1bd
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 159885
Filename: opennds_10.3.0-1_mips_mips32.ipk
Size: 159106
SHA256sum: 2641243e82e1207dadcfbb824efef7c294564f9f2060b93d1d82fc50ab2e4706
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018-06-19-dbf4e591-4
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: mips_mips32
Installed-Size: 78918
Filename: pimbd_2018-06-19-dbf4e591-4_mips_mips32.ipk
Size: 79710
SHA256sum: 71fd7921292cac465d0ea36b673ddc0ad63d31a5714b4f9b3b5e916f7389896b
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: mips_mips32
Installed-Size: 33227
Filename: prince_0.4-3_mips_mips32.ipk
Size: 33788
SHA256sum: 9830217ff8391b037e20ba8081fb48f0e7e477f4af15f6bfb46bb54decefa7d1
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: quagga-bgpd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 203862
Filename: quagga-bgpd_1.2.4-2_mips_mips32.ipk
Size: 201945
SHA256sum: 09bbf8b10559f7e699c6d98591f457697fc08133843507f0e9965502700d59a7
Description:  BGPv4, BGPv4+, BGPv4- routing engine

Package: quagga-isisd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 90472
Filename: quagga-isisd_1.2.4-2_mips_mips32.ipk
Size: 90203
SHA256sum: 2512fa6553b096f709e41a59ca0f1b3d19c6e8ff7575878f2a20e77d55ae4b5c
Description:  IS-IS routing engine

Package: quagga-libospf
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 182449
Filename: quagga-libospf_1.2.4-2_mips_mips32.ipk
Size: 181862
SHA256sum: 19d218dbfcadfe0d0e64b680dcb020b1bbe752bf054a3b468c95517211d9dbcb
Description:  OSPF library

Package: quagga-libzebra
Version: 1.2.4-2
Depends: libc, quagga
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 130677
Filename: quagga-libzebra_1.2.4-2_mips_mips32.ipk
Size: 130153
SHA256sum: 89f2888dca40bbc75eef9e894cd67458dba1f8613ce62e52029e3cae0af79b9b
Description:  zebra library

Package: quagga-ospf6d
Version: 1.2.4-2
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 85931
Filename: quagga-ospf6d_1.2.4-2_mips_mips32.ipk
Size: 86071
SHA256sum: 194bf768aacc4563619b9f8853be71361f98ff6ee7c2f52dd16587fd237dbd2b
Description:  OSPFv3 routing engine

Package: quagga-ospfd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 3744
Filename: quagga-ospfd_1.2.4-2_mips_mips32.ipk
Size: 4376
SHA256sum: 9051f35c0eb75f8bfa757715e3c1d357cf2beb96bdc12edfa1e6ddb20db8a0c2
Description:  OSPFv2 routing engine

Package: quagga-ripd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 35203
Filename: quagga-ripd_1.2.4-2_mips_mips32.ipk
Size: 35251
SHA256sum: 9cd5eee916cacb1c1cca3cd9ae1b8a8ab4f56944eff2946d2e479e24040b3161
Description:  RIP routing engine

Package: quagga-ripngd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 29515
Filename: quagga-ripngd_1.2.4-2_mips_mips32.ipk
Size: 29579
SHA256sum: 592012f286dc8cd7ebfd53a07a8c25a4f66bea889cef7025acb7f619a8c30d80
Description:  RIPNG routing engine

Package: quagga-vtysh
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra, libreadline8, libncurses6
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 132377
Filename: quagga-vtysh_1.2.4-2_mips_mips32.ipk
Size: 132159
SHA256sum: 292da1e191dd2855411b10912c6530189e6339c7198d391de08f9a93c95cd874
Description:  integrated shell for Quagga routing software

Package: quagga-watchquagga
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 11505
Filename: quagga-watchquagga_1.2.4-2_mips_mips32.ipk
Size: 12094
SHA256sum: 81c1eb0eb45325a35ca4649afea1bc5ad4450000a646d79728060b8127185362
Description:  Quagga watchdog

Package: quagga-zebra
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 87875
Filename: quagga-zebra_1.2.4-2_mips_mips32.ipk
Size: 87261
SHA256sum: 2b3beae57d82f1106bc24c9b1989b79b429022e85284d078e3911e99a09e1cf9
Description:  Zebra daemon

Package: quagga
Version: 1.2.4-2
Depends: libc, librt
License: GPL-2.0-or-later
Section: net
Architecture: mips_mips32
Installed-Size: 2380
Filename: quagga_1.2.4-2_mips_mips32.ipk
Size: 3197
SHA256sum: ac6a70a36b12917e5b3883c2c508a78ff7f851410fab98c110e65a51b2012d09
Description:  A routing software package that provides TCP/IP based routing services
 with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
 OSPFv3, BGP-4, and BGP-4+

Package: vis
Version: 2013-04-07-7710cce4-9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 10454
Filename: vis_2013-04-07-7710cce4-9_mips_mips32.ipk
Size: 11117
SHA256sum: 76fa50faf1373b3be90c45e6a4299ba555ba0d85ddeb56a434cb84c157094c06
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox20230523
License: GPL-2.0-only
Section: net
Architecture: mips_mips32
Installed-Size: 8835
Filename: zonestitcher_2020-05-22-0dfef1eb-3_mips_mips32.ipk
Size: 9503
SHA256sum: 2d00764ef9eea888d0addc2478b6146f118ace86ef9b6a9574d4bfc43877ae67
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.