Package: ahcpd
Version: 0.53-3
Depends: libc, ip, librt
License: MIT
Section: net
Architecture: arm_xscale
Installed-Size: 22004
Filename: ahcpd_0.53-3_arm_xscale.ipk
Size: 22872
SHA256sum: c7da37b7ffcce954d4940d3f33f4ec70d99429b73d60d9f69f375038e0a8babc
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2023.1-1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
Architecture: arm_xscale
Installed-Size: 24920
Filename: alfred_2023.1-1_arm_xscale.ipk
Size: 26116
SHA256sum: f9119c995d1980c9a47be65a836756c162c4d6c1255fe39cdebb6861c894f283
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-1
Depends: libc, librt
Section: net
Architecture: arm_xscale
Installed-Size: 3825
Filename: babel-pinger_0.1-1_arm_xscale.ipk
Size: 4613
SHA256sum: 9bc254b95c0526f5e46534a9190d10a6b52a6bfa1cb68f596a42e870e71b50f1
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-1
Depends: libc, libubus20230605, libubox20230523
License: MIT
Section: net
Architecture: arm_xscale
Installed-Size: 62745
Filename: babeld_1.13.1-1_arm_xscale.ipk
Size: 63884
SHA256sum: f9b2585cc734711babb9d484ec6127b1dbc75be8e4c0d148fa53efb11c77964b
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_xscale
Installed-Size: 42095
Filename: batctl-default_2023.1-3_arm_xscale.ipk
Size: 43034
SHA256sum: 3fa387140fc297887a5ab307990fa9c6025bcad3ba0e5abde42d24542cffdfcc
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_xscale
Installed-Size: 49333
Filename: batctl-full_2023.1-3_arm_xscale.ipk
Size: 50308
SHA256sum: ebdb3764a24dbc54a81853e16a8086d789fb8f42335f853115c52b7a97422797
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2023.1-3
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
Architecture: arm_xscale
Installed-Size: 13761
Filename: batctl-tiny_2023.1-3_arm_xscale.ipk
Size: 14733
SHA256sum: 09eb1f8f69df9b87588b8ba15297a404fa98751741e13ac04a542eb67e73048b
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2023.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 42395
Filename: batmand_1440-1_arm_xscale.ipk
Size: 43172
SHA256sum: b92ee8d56eabfc8aa543951f65929ded67c3e1d6489aab9b607a3a955bd5ff79
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird1-ipv4-uci
Version: 0.3-5
Depends: libc, libuci20130104, uci, bird1-ipv4
License: GPL-3.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 6834
Filename: bird1-ipv4-uci_0.3-5_arm_xscale.ipk
Size: 7868
SHA256sum: 601fcb960389de1d9b7e3ddeadb86b05b2b0ea9dba4500dbe832c8ae79607255
Description:  The BIRD UCI module (v1.6) (IPv4)

Package: bird1-ipv4
Version: 1.6.8-2
Depends: libc, libpthread
Conflicts: bird4
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 199724
Filename: bird1-ipv4_1.6.8-2_arm_xscale.ipk
Size: 200845
SHA256sum: 974af5fb4e34b7149ebd34ef58edf3710b76c2a6788231e9e375950724fcf706
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1-ipv6-uci
Version: 0.3-5
Depends: libc, libuci20130104, uci, bird1-ipv6
License: GPL-3.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 6003
Filename: bird1-ipv6-uci_0.3-5_arm_xscale.ipk
Size: 6967
SHA256sum: 06c7877d47ab4051d08e07ad9b1b70ce83fdd17b8695756a77e10a247ea44aec
Description:  The BIRD UCI module (v1.6) (IPv6)

Package: bird1-ipv6
Version: 1.6.8-2
Depends: libc, libpthread
Conflicts: bird6
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 229784
Filename: bird1-ipv6_1.6.8-2_arm_xscale.ipk
Size: 230894
SHA256sum: aea062e0769a71237b145baf8d84401e2a7d3cbeb4635dc41ee81ec40bd2f4a3
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
 protocols.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 

Package: bird1c-ipv4
Version: 1.6.8-2
Depends: libc, libreadline8, libncurses6, bird1-ipv4
Conflicts: birdc4
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 8576
Filename: bird1c-ipv4_1.6.8-2_arm_xscale.ipk
Size: 9778
SHA256sum: a8ce3de37e20a26b29663b6d86ab37454e3b874744ed5c3cb5cd6d45e8176ddb
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1c-ipv6
Version: 1.6.8-2
Depends: libc, libreadline8, libncurses6, bird1-ipv6
Conflicts: birdc6
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 8658
Filename: bird1c-ipv6_1.6.8-2_arm_xscale.ipk
Size: 9863
SHA256sum: f91fe8cb8bfdf88b011aa8cac0b2e8870342ff553afa38bfccbea677ce9b1517
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.
 

Package: bird1cl-ipv4
Version: 1.6.8-2
Depends: libc, bird1-ipv4
Conflicts: birdcl4
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 7905
Filename: bird1cl-ipv4_1.6.8-2_arm_xscale.ipk
Size: 9021
SHA256sum: 6bf7291d0f50e8b3b940b7ec388193f846d291ba423bb2d00be7d92eff4bb2e0
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird1cl-ipv6
Version: 1.6.8-2
Depends: libc, bird1-ipv6
Conflicts: birdcl6
License: GPL-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 7975
Filename: bird1cl-ipv6_1.6.8-2_arm_xscale.ipk
Size: 9091
SHA256sum: bc7502e9da1cece24ed204ab9e6677057c9c3f33fa0eff3717920e0a0f03f888
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6
 support into separate binaries. See also the bird2 package for the newer
 branch which integrates support for both IP protocols in a single binary.
 
 This is a BIRD lightweight command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 

Package: bird2
Version: 2.15.1-1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 389617
Filename: bird2_2.15.1-1_arm_xscale.ipk
Size: 388843
SHA256sum: 1e5e29fad05e3da6c01c475df16227f3eaf66368610726b24aad21414fa939f4
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 9325
Filename: bird2c_2.15.1-1_arm_xscale.ipk
Size: 10445
SHA256sum: 30a1c1d03d83c1a4242e95bca9660c6b23d805febfabb1a92e492fdee4933249
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 7987
Filename: bird2cl_2.15.1-1_arm_xscale.ipk
Size: 9037
SHA256sum: 88eb2ab25b6be4430a2888ad92011bc8673109e9baa1fa9e9e68f83ea15eeed6
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: 7.1.1-5
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 4014
Filename: bmx7-iwinfo_7.1.1-5_arm_xscale.ipk
Size: 4777
SHA256sum: f43fc6b040e0c7c070ed8ce6cdec814f303affac42aee3f5cf1bc06987e5a340
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: 7.1.1-5
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 7708
Filename: bmx7-json_7.1.1-5_arm_xscale.ipk
Size: 8510
SHA256sum: 0824feb56f8583868b634b43020757d7e528b8f42e11235a6d86d1d0618b31ac
Description:  json plugin based on json-c

Package: bmx7-sms
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 5367
Filename: bmx7-sms_7.1.1-5_arm_xscale.ipk
Size: 6120
SHA256sum: 5d011ac166746352b8dbc99bb98b9acc2c290d03247c4dc545071fade9e51776
Description:  sms plugin

Package: bmx7-table
Version: 7.1.1-5
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 9489
Filename: bmx7-table_7.1.1-5_arm_xscale.ipk
Size: 10275
SHA256sum: 84f38b4a1d39bb9cab38f7aec5cd31181e12c69874f87f1fc2c6fb7d4fe5067b
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: 7.1.1-5
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 5028
Filename: bmx7-topology_7.1.1-5_arm_xscale.ipk
Size: 5754
SHA256sum: 4d256e04bd4ad6b8ab48cf4aabe0e193e0dca2e9674acc13c6b46e2e4efa49ef
Description:  topology plugin

Package: bmx7-tun
Version: 7.1.1-5
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 25792
Filename: bmx7-tun_7.1.1-5_arm_xscale.ipk
Size: 26540
SHA256sum: a449866768d9e0e3891cb3e14561b247b7a522edfa0a850ade9335ecb4e5f39d
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: 7.1.1-5
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 8080
Filename: bmx7-uci-config_7.1.1-5_arm_xscale.ipk
Size: 8931
SHA256sum: 098ce86b7183948863274c07ade095e5ad0ec983fa4a0dafa6ce12f2e9e45571
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: 7.1.1-5
Depends: libc, zlib, libmbedtls12, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 175557
Filename: bmx7_7.1.1-5_arm_xscale.ipk
Size: 176147
SHA256sum: 7d3c4aeb41fdf2e5de4e051eb786c374df8a08bf0f7eae60823d8590e570cd9f
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: v21.1-4
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 345961
Filename: cjdns-tests_v21.1-4_arm_xscale.ipk
Size: 346037
SHA256sum: 907ffb1bc294125c8ce7ec243846a5bf56360f19876891bae1c6d29f6ecfbbdd
Description:  cjdns test cases

Package: cjdns
Version: v21.1-4
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 399401
Filename: cjdns_v21.1-4_arm_xscale.ipk
Size: 399907
SHA256sum: 6b87f49f9cb99d1398bea16d509832c3d9d570ad062cb4ba058afd4fb11f8828
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: arm_xscale
Installed-Size: 545
Filename: hnet-full-l2tp_2018-12-21-c4376661-1_arm_xscale.ipk
Size: 1391
SHA256sum: f44d2bfb551b7e7a6912c77299141b25d036c52e532a57f754acc32a09daf1d5
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: arm_xscale
Installed-Size: 96
Filename: hnet-full-secure_2018-12-21-c4376661-1_arm_xscale.ipk
Size: 925
SHA256sum: eea3dbf690fe9875d9a9100a58e54e374590d4da557b03d641b6cba20a430e14
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018-12-21-c4376661-1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
Architecture: arm_xscale
Installed-Size: 96
Filename: hnet-full_2018-12-21-c4376661-1_arm_xscale.ipk
Size: 913
SHA256sum: f75f04592a32e1ecf46a19cc3d39d2c1f3297ce34e624e170eb930444e394f4d
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
Architecture: arm_xscale
Installed-Size: 94303
Filename: hnetd-nossl_2018-12-21-c4376661-1_arm_xscale.ipk
Size: 95297
SHA256sum: d6c211ca9b3ef921ca227539b6182dd3c24745a568881d5c025b71a499feef03
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018-12-21-c4376661-1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
Architecture: arm_xscale
Installed-Size: 104111
Filename: hnetd-openssl_2018-12-21-c4376661-1_arm_xscale.ipk
Size: 105045
SHA256sum: 76aee60e1f2ffb0bc2def535e80ec10da0e3ad910d2684613176a0261213cd39
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-bird1-ipv4
Version: 0.3-5
Depends: libc, luci-base, luci-compat, bird1-ipv4-uci
License: GPL-3.0-or-later
Section: luci
Architecture: arm_xscale
Installed-Size: 7425
Filename: luci-app-bird1-ipv4_0.3-5_arm_xscale.ipk
Size: 8243
SHA256sum: 2069909d7757188b0b52a8c4e47ce4fef846ca4b8c381d6c3714b5de1ceff8d9
Description:  LuCI support for BIRD (v1.6) (IPv4)

Package: luci-app-bird1-ipv6
Version: 0.3-5
Depends: libc, luci-base, luci-compat, bird1-ipv6-uci
License: GPL-3.0-or-later
Section: luci
Architecture: arm_xscale
Installed-Size: 7469
Filename: luci-app-bird1-ipv6_0.3-5_arm_xscale.ipk
Size: 8283
SHA256sum: b854903702f4079816754609d32bcd314327a835236e31e4c9b272d7fc9f9c9a
Description:  LuCI support for BIRD (v1.6) (IPv6)

Package: luci-app-cjdns
Version: 1.3-9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
Architecture: arm_xscale
Installed-Size: 5672
Filename: luci-app-cjdns_1.3-9_arm_xscale.ipk
Size: 6555
SHA256sum: 47b1928bafd463c5734afecf2a7b2677372fecd03f1b4d48ccdd8ec2e4d4ceb4
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018-12-21-c4376661-1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: arm_xscale
Installed-Size: 56779
Filename: luci-app-hnet_2018-12-21-c4376661-1_arm_xscale.ipk
Size: 57618
SHA256sum: 7eca3f6659b32ab781d030385733d5a804dabc208e26ee08d34450f6f6a1d93d
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-14
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 6976
Filename: luci-app-olsrd2_0.2.6-14_all.ipk
Size: 7853
SHA256sum: fb0d0a47a3a52a65488cb67e0ec8912d81d091d815821dbca3bbc38654dfb31e
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017-08-24-93b5ace4-9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 121949
Filename: mcproxy_2017-08-24-93b5ace4-9_arm_xscale.ipk
Size: 122824
SHA256sum: fc641361e8381818dbb6b28680ded7d0d015146cae456d8976100850a46a0aeb
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 4.1.1-1
Depends: libc
License: GPL-2.0-or-later
Section: net
Architecture: all
Installed-Size: 24095
Filename: mesh11sd_4.1.1-1_all.ipk
Size: 25645
SHA256sum: c8dfe6abfd64dc2c5242a006fcf2ca3c0545a52f268911d4b5b506cd3a968a1c
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014-12-12-2d6d1b0b-7
Depends: libc, libubox20230523
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 6162
Filename: minimalist-pcproxy_2014-12-12-2d6d1b0b-7_arm_xscale.ipk
Size: 7231
SHA256sum: d136276f018f5fe558ee7f241ac97b34de7e7b1c246c78e17df3dfad023694d3
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 1943
Filename: naywatch_1-7_all.ipk
Size: 2850
SHA256sum: ab3e1af5442c6113f388f498f7e18db85acd55fcfb87369a238356dd97b3888f
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 31411
Filename: ndppd_0.2.5-2_arm_xscale.ipk
Size: 32305
SHA256sum: 86eb6928ca045b172a9f199778ec16caad2019d0c08d8ab83174b602f3b94b0e
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 46618
Filename: nodogsplash_5.0.2-1_arm_xscale.ipk
Size: 47657
SHA256sum: 1040baf112cab186e6ed5afa0509b72a26584204b1dfdf5e6f0f99674fb9e782
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox20230523, mdnsd
License: GPL-2.0-only
Section: net
Architecture: arm_xscale
Installed-Size: 10257
Filename: ohybridproxy_2020-05-22-0dfef1eb-3_arm_xscale.ipk
Size: 11122
SHA256sum: 2ad03cbabd2686b124d3413c6d3527f4e2e517c266cb910e8b145b6aef06ac54
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 1973
Filename: olsrd-mod-arprefresh_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 2743
SHA256sum: 44ed1875428c7d4b7fd9efb1860469767675d0d7c74a46ec40deab3edad4e480
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 12281
Filename: olsrd-mod-bmf_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 13014
SHA256sum: 90cab0a419af24d1af94f10e380eb223018ae1bb05a24a2a4662efa1a71e80bb
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 3797
Filename: olsrd-mod-dot-draw_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 4534
SHA256sum: fcbc7107f4ef79a87e35eb9927fe7b586e1e05d7e9ed0c26160452386a5dfde6
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 2300
Filename: olsrd-mod-dyn-gw-plain_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 3042
SHA256sum: 546858ee78d0d39724f049e8f15271d31192bfff94a11483d6354b59989695bb
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 3989
Filename: olsrd-mod-dyn-gw_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 4728
SHA256sum: c9249318432fe3cedf0cfd41a19eda5b3cb6c66b153d3de01bad03714dba6c3b
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 2525
Filename: olsrd-mod-filtergw_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 3258
SHA256sum: b5dab2658b2c7c1649e744a1b2bcba171483eb5ae42d3dd14da2ae2457a4070c
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 32751
Filename: olsrd-mod-httpinfo_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 33567
SHA256sum: 992e725fd35259bf2b6f1f9bdfa7b2423cd9829b75c7ba409067df40c937f0d5
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 24683
Filename: olsrd-mod-jsoninfo_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 25425
SHA256sum: 8a6bbf7d5642a5bfbbddb7cdfc715e86d3d6b38ce648ba9e278e964017fb7408
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 9003
Filename: olsrd-mod-mdns_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 9778
SHA256sum: 1522732a76cc20f2f4b609c1b5a7d58e2a41ec6c51f24b7f6e57cd2e94052b6d
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 10945
Filename: olsrd-mod-nameservice_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 11725
SHA256sum: 7cc0b37fb321b4830c295715a9b194f593822e04c4819b42cbddec57ab2ec8ad
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 13757
Filename: olsrd-mod-netjson_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 14486
SHA256sum: f80e04a0dd8d667b361d9971c5ccb46e57c331dade5c1fd4b2c942e10c53f2d1
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 8260
Filename: olsrd-mod-p2pd_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 9038
SHA256sum: fbb265dd6f44610dca368359196f28ba60f5476ae40bed16c6a13cfc6d5ff6d0
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 2865
Filename: olsrd-mod-pgraph_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 3612
SHA256sum: 44fc5cc94fdf2bc83cb019d7f8abff7b3a0b957d4853df113f0c5820dc529bae
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 60998
Filename: olsrd-mod-pud_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 61587
SHA256sum: 5507d1be241ea3f71e1a51cf61e458231734490509b8a07112f36cb7369f8120
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 6115
Filename: olsrd-mod-quagga_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 6849
SHA256sum: 1b99fe821dce215d8814b77637c06cff5773759b90133e57879d23f288eb6240
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 10210
Filename: olsrd-mod-secure_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 11024
SHA256sum: 4551a233487d0bfc8799a60e2134b983a9e00930116e7370379126ba874b6609
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 4265
Filename: olsrd-mod-sgwdynspeed_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 5048
SHA256sum: a483682da93f599b657ec1382d283b40aa9d00cee46a00ddd8c517200d2d80be
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 15815
Filename: olsrd-mod-txtinfo_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 16553
SHA256sum: 414274596d6def4001ade2a30373e8c4b0d705f740470d7f1a1a25a84c480eda
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 1567
Filename: olsrd-mod-watchdog_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 2330
SHA256sum: 39d5af9705ad2b02c3b7ca6a72c8b3b2eff48df75b329ec5837fac9f6f2dff41
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 1181
Filename: olsrd-utils_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 1928
SHA256sum: 4057a476d7df9c5011ff89d27de8e2a9c740bcaf9d70a033feb8401f7bdb43b2
Description:  Utils for OLSRD

Package: olsrd
Version: 2023-06-12-a9b3f1ac-1
Depends: libc, libpthread, libubus20230605, iptables, ip6tables
License: BSD-3-Clause
Section: net
Architecture: arm_xscale
Installed-Size: 141371
Filename: olsrd_2023-06-12-a9b3f1ac-1_arm_xscale.ipk
Size: 142214
SHA256sum: 73459eb3765ef0020e8be0f3b8a1fa61fd5b2afe75d8fe7bcc193b90e2490e17
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_xscale
Installed-Size: 161226
Filename: oonf-dlep-proxy_2022-08-25-fb15d54d_arm_xscale.ipk
Size: 162119
SHA256sum: a853291393ab5e6a1c756d908dadb68c79f65f89e6deb668262663db46abe6e5
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022-08-25-fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_xscale
Installed-Size: 157394
Filename: oonf-dlep-radio_2022-08-25-fb15d54d_arm_xscale.ipk
Size: 158202
SHA256sum: ffdde4e43978a6936ddd29f749346171f1ec1c4eff3ad1846cc31f9f061e1053
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
Architecture: arm_xscale
Installed-Size: 1545
Filename: oonf-init-scripts_0.9.1-r3_arm_xscale.ipk
Size: 2280
SHA256sum: 775258e1b5afffcfc9453af7e962ba5f2fb1cac29afce2318c4c4f1923dc0596
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022-08-25-1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
Architecture: arm_xscale
Installed-Size: 234583
Filename: oonf-olsrd2_2022-08-25-1cec9b21_arm_xscale.ipk
Size: 235268
SHA256sum: fd20ee4157963a5b7ed766f3290c7d1921963fd08ce9d702b8633a3829c15112
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 163133
Filename: opennds_10.3.0-1_arm_xscale.ipk
Size: 162830
SHA256sum: 3ef8cd7ce21c7f85575fc8cae4c543da3b6b51c27f61f0f22948af9fedeb2ba0
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018-06-19-dbf4e591-4
Depends: libc, netifd
License: Apache-2.0
Section: net
Architecture: arm_xscale
Installed-Size: 83068
Filename: pimbd_2018-06-19-dbf4e591-4_arm_xscale.ipk
Size: 84015
SHA256sum: c8ec64ab500fa690919fa6887d1c810a6f86012d8cf2f5edcf62c5fddf697e58
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
Architecture: arm_xscale
Installed-Size: 26923
Filename: prince_0.4-3_arm_xscale.ipk
Size: 27944
SHA256sum: 5d50c33dd13ae3a90813e7080a1e2dcdd80de2cfccfe2b66b3531bec283f50bf
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: quagga-bgpd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 207972
Filename: quagga-bgpd_1.2.4-2_arm_xscale.ipk
Size: 207924
SHA256sum: 7deaa5ba4df50b7e0db14d1807fc3ef6596f2ef730852c3dd53de3367b189f16
Description:  BGPv4, BGPv4+, BGPv4- routing engine

Package: quagga-isisd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 92552
Filename: quagga-isisd_1.2.4-2_arm_xscale.ipk
Size: 93235
SHA256sum: a4ba9ee75fb3ea6377972b6a5f9283ac7e36ebd2423845932ebdeacbf1ac1587
Description:  IS-IS routing engine

Package: quagga-libospf
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 195024
Filename: quagga-libospf_1.2.4-2_arm_xscale.ipk
Size: 194050
SHA256sum: c27092d35abbfdefd2e4a52fa155f4c634e944d21e0143f989364a596795bd22
Description:  OSPF library

Package: quagga-libzebra
Version: 1.2.4-2
Depends: libc, quagga
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 132605
Filename: quagga-libzebra_1.2.4-2_arm_xscale.ipk
Size: 132146
SHA256sum: 48b2e7424ab927a1518b737da62ba7d2b90627d9bace7f37b77958219f372b6e
Description:  zebra library

Package: quagga-ospf6d
Version: 1.2.4-2
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 90094
Filename: quagga-ospf6d_1.2.4-2_arm_xscale.ipk
Size: 90844
SHA256sum: 60e8c08e2e497613ee932d06a35bb286b1c6013961ad930f535b32b7e1b0c1ff
Description:  OSPFv3 routing engine

Package: quagga-ospfd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libospf
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 3558
Filename: quagga-ospfd_1.2.4-2_arm_xscale.ipk
Size: 4336
SHA256sum: c06976aa2fa2fb2b7aa09b3771becb732fd5c7a908600e2848a175c923562d77
Description:  OSPFv2 routing engine

Package: quagga-ripd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 36332
Filename: quagga-ripd_1.2.4-2_arm_xscale.ipk
Size: 37039
SHA256sum: ccc13d984bc2e7b6c9f37820f56a706576f406488204ff63171d9d6d64213e8a
Description:  RIP routing engine

Package: quagga-ripngd
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 29801
Filename: quagga-ripngd_1.2.4-2_arm_xscale.ipk
Size: 30532
SHA256sum: 6d28bbeab706e01ba219a15dadd08ff33fb31fc90399aa49315bca78ec1d1e52
Description:  RIPNG routing engine

Package: quagga-vtysh
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra, libreadline8, libncurses6
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 124116
Filename: quagga-vtysh_1.2.4-2_arm_xscale.ipk
Size: 124266
SHA256sum: 4055b60fa53421485eee9fff84c4c10780d8dca6aa54dfc153146436ecc9fc79
Description:  integrated shell for Quagga routing software

Package: quagga-watchquagga
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 11539
Filename: quagga-watchquagga_1.2.4-2_arm_xscale.ipk
Size: 12311
SHA256sum: e74d9939ec39cdcc01e271b4891c6009f00632a3f691f35010424ae1788e568f
Description:  Quagga watchdog

Package: quagga-zebra
Version: 1.2.4-2
Depends: libc, quagga, quagga-libzebra
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 89146
Filename: quagga-zebra_1.2.4-2_arm_xscale.ipk
Size: 89658
SHA256sum: 2740c619328ff488eb883619a493a0a570aa229e0fad2301144deb1ae74bb881
Description:  Zebra daemon

Package: quagga
Version: 1.2.4-2
Depends: libc, librt
License: GPL-2.0-or-later
Section: net
Architecture: arm_xscale
Installed-Size: 2383
Filename: quagga_1.2.4-2_arm_xscale.ipk
Size: 3199
SHA256sum: 93e7ab8d43e788f3afdc7b074eded4d4900ecb9a5a38c59062408e79118f4890
Description:  A routing software package that provides TCP/IP based routing services
 with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2,
 OSPFv3, BGP-4, and BGP-4+

Package: vis
Version: 2013-04-07-7710cce4-9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
Architecture: arm_xscale
Installed-Size: 10277
Filename: vis_2013-04-07-7710cce4-9_arm_xscale.ipk
Size: 11109
SHA256sum: 4c39e47a590b6505653d6906ae56d3c1b3ec28f463062dc332b9d92987053f95
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020-05-22-0dfef1eb-3
Depends: libc, libubox20230523
License: GPL-2.0-only
Section: net
Architecture: arm_xscale
Installed-Size: 8120
Filename: zonestitcher_2020-05-22-0dfef1eb-3_arm_xscale.ipk
Size: 8971
SHA256sum: f366746441f6caa38b51163d53587ce840a108e4816f68fc5ebea2b6d0697439
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.