Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: arm_fa526
Installed-Size: 61440
Filename: ahcpd_0.53-r3_arm_fa526.ipk
Size: 22830
SHA256sum: f3082dc78fa4eefcf516ba6f97923c116f40ba616cfc90254decd2c845f65931
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 71680
Filename: alfred_2024.3-r1_arm_fa526.ipk
Size: 26114
SHA256sum: 45178580f8414573b46deef35525b299f5a50c4a14b978c4a8efd4a41165aa87
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: arm_fa526
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_arm_fa526.ipk
Size: 4626
SHA256sum: d81bf71cd7d00d09da26025e55894b42b98583413632c98a816ebc68b582ecc0
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: arm_fa526
Installed-Size: 133120
Filename: babeld_1.13.1-r2_arm_fa526.ipk
Size: 63354
SHA256sum: a044466fb76f97a3192900fabeabea3d5b307028fe58b9e31b5dcafae9203e29
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 102400
Filename: batctl-default_2024.3-r1_arm_fa526.ipk
Size: 43644
SHA256sum: e3f8efe84db92b9d57c42d28d9eee87bf16b23d411e92a82c2b35aee1bfb2844
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 112640
Filename: batctl-full_2024.3-r1_arm_fa526.ipk
Size: 50654
SHA256sum: 7485ee0ded8f886dcd8c0ac0117d45609a7106cad7ac14cf45fdde211cf6601f
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 40960
Filename: batctl-tiny_2024.3-r1_arm_fa526.ipk
Size: 14692
SHA256sum: d2a31932871afe483b55effe9e387b74121a2862837ca9a479e627b323ac8b61
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 102400
Filename: batmand_1440-r1_arm_fa526.ipk
Size: 43333
SHA256sum: fbc7e353a190355471787bd6a0bed32b42645aae42a34dc9f6aaf3701ea2c846
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_fa526
Installed-Size: 983040
Filename: bird2_2.15.1-r1_arm_fa526.ipk
Size: 385394
SHA256sum: 805f9090394148390684c61821a564dfa60ff008d6f73a1260d68b8bb051bb19
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_fa526
Installed-Size: 30720
Filename: bird2c_2.15.1-r1_arm_fa526.ipk
Size: 10464
SHA256sum: ee1f42667872a10ac03d67975cabf032b9373d3e9a03a0ba51e6c0e6400c334b
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_fa526
Installed-Size: 30720
Filename: bird2cl_2.15.1-r1_arm_fa526.ipk
Size: 9057
SHA256sum: dd4f15db213972540cbbe03f3baa44856a60579456de1fc8fcfdd8c7c8765e0b
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-iwinfo_r2024061001-r1_arm_fa526.ipk
Size: 4843
SHA256sum: 617155f0b0c6f3b8e0d74e7359cdddb4988731a40cb505b3f6f118ef53494c53
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-json_r2024061001-r1_arm_fa526.ipk
Size: 8481
SHA256sum: 848e4402c40585d68ed685378c40dbd92f6782bf3e6e5a387811c8c6f82f4c64
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-sms_r2024061001-r1_arm_fa526.ipk
Size: 6117
SHA256sum: 6dec7b7705a25d238cfa20b6b7289ff255fc1b850ac4f4d14f4ae9876d32a12a
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 30720
Filename: bmx7-table_r2024061001-r1_arm_fa526.ipk
Size: 10294
SHA256sum: 30a11e66ff3e885790f829145b936eba2e6aa15b2508eb6ba19ad609628baa8e
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-topology_r2024061001-r1_arm_fa526.ipk
Size: 5790
SHA256sum: 39cb2b5dc8e34ab0ee48c57e40456efe708b9685c1aba914c6ceb6a0937cf565
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 61440
Filename: bmx7-tun_r2024061001-r1_arm_fa526.ipk
Size: 26479
SHA256sum: 8a5f92e2e398d98e19341b104486db204c2536c33bff2b4e904c6474332dd03e
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 30720
Filename: bmx7-uci-config_r2024061001-r1_arm_fa526.ipk
Size: 8898
SHA256sum: 0cbf3c8c9bd145efa3259ba229166994ad1a957bba1dc805d7534093eb481ec4
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 348160
Filename: bmx7_r2024061001-r1_arm_fa526.ipk
Size: 173122
SHA256sum: 07e92ed1d75459d1ac84a5c0ebc34d7de34053ef1f45f1a1209b57e63abcf130
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_fa526
Installed-Size: 747520
Filename: cjdns-tests_21.1-r6_arm_fa526.ipk
Size: 345708
SHA256sum: 911e481237c2785e5d57269e0bdacf3732404acabb781062cab6ca8e97c89be9
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_fa526
Installed-Size: 890880
Filename: cjdns_21.1-r6_arm_fa526.ipk
Size: 399960
SHA256sum: 39b5db6d4219e000f3712af037fe04fe53ae7b50eb9e114d12961de0a812fe75
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 1422
SHA256sum: 5e1cd082b58b7cbccc200276018ebc46e1135cae6a76a23d1270c05c7180d5bb
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 956
SHA256sum: 9411071160b3915e440fd022b32accdb310dfabf9a4e8f3a6c4897c83028ea74
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 945
SHA256sum: 512b8bdc1a2f0f4cb00e0deae00bdf31e3e3b1f2fd6071fa292abb42fbdbd56b
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 215040
Filename: hnetd-nossl_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 94736
SHA256sum: d090e0bcd71c421874d88ad09df33f9984504163dd5aea157570b1efd13ab131
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 235520
Filename: hnetd-openssl_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 104620
SHA256sum: 94ba9f107c1c3502d379e3c760209d60f614b0d630c7a793860a5afecb1ecfd5
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_fa526
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_arm_fa526.ipk
Size: 6581
SHA256sum: 546abcab23d158fb20960c80538b0c640585592bc5433530b8027b3539ab81b5
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: arm_fa526
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 57614
SHA256sum: 045e034605d3a15c9495ed9926fb42d39b09708acb55591ef51304a2c2886716
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7779
SHA256sum: a2484e9641df66e53c28d3bd7d955dcb3c77fd148ee2aed6af84ad618e19e49c
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25670
SHA256sum: 5ae7d974442a83a08b22e96e3359fd4e9c465364aec2ff812376fd2048f89f22
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: arm_fa526
Installed-Size: 20480
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_arm_fa526.ipk
Size: 7191
SHA256sum: e0ee5ce1ad7b65f8037b1b7f26dc2459f6e285eef6f155b62cdf036b54d9a6f9
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2857
SHA256sum: 413660fe12705015607ae0c77b279ba746c4bcf45d7cbb9becc9584547b55127
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: arm_fa526
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_arm_fa526.ipk
Size: 32554
SHA256sum: 9c9b4804ce429f5baa25eb79961c36de2a29913736382d0bbcd4844b36bed294
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: arm_fa526
Installed-Size: 122880
Filename: nodogsplash_5.0.2-r1_arm_fa526.ipk
Size: 47595
SHA256sum: 31f83bea7b908ee9d83b963bd54aad7cf2fc34ae1d4ace4ec110656f5fd776f4
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_fa526
Installed-Size: 30720
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_arm_fa526.ipk
Size: 11163
SHA256sum: f338e1565a0b26307c06e3b66d470defaea49125eb4067d8226bc90233cd0fd9
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 2737
SHA256sum: 6d18985b30315f00a1d18ee3391a73a5617993517a38f7417e827d8ac5aa841a
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 12947
SHA256sum: fd04a145826858a1c935a9be8484894003e59ae35d7162f54238f01cf1427424
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 4565
SHA256sum: c43e9074b970030808f8e5b112e12337c524a14c5463ddd5109963fbefa8cea7
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 3068
SHA256sum: 161ec7e38b8c83b6f6accc6458d3a4921ada1dd4fc6449f4b9a04397a7860641
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 4731
SHA256sum: e931f0f5d7b903dcf0e8abc9c25bbfbdccf783de00f6726ee94ce8bf942b5ebd
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 3293
SHA256sum: 271024d0b7582ef97e9ae09c1e7769bd0b98e0c992c293a8300c1655cd492a84
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 33519
SHA256sum: b783422d98ec3a7e4067a3dc778f7e9b5c1a945860ec354333ab578acfcf60cf
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 25287
SHA256sum: 34043fb336dd16ae033c75f6f0c6c276d7804efdb75f66bc63f0eccd75dbd6fd
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 9773
SHA256sum: 404d9d46d7b501126da44370a875755f6fa9ac8b86c092707ace90bde3fcb37c
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 11753
SHA256sum: 53e1775ebbe38959667f342b7f33a290bde900fc75a62d2d069c6f09dfeeedb8
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 40960
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 14511
SHA256sum: 6f21bc530b7d736ffe3b2f33ff2272f654d162fc3353133b86f8637613139e5a
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 9033
SHA256sum: dd6f0b91cd3e425df1cfeab8e628af8c30a29b73cfec01c83323828ad5515798
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 3657
SHA256sum: dd100e2e561d16b177f622a32aa2169d8f46467b27094eab2c6b6935e0c0549b
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 184320
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 62364
SHA256sum: 5590caf2d5ff62dacec181df7f928a2c31d9ab16596928db997e4a7f10858928
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 6815
SHA256sum: 8802941720c2b18abdf4a642be3eff5fe2a64dac0f3205ac8d02ad4fd072498a
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 11094
SHA256sum: cbce25dd0bedff6844c4b54cb68722a7f8035a2ce9729c6b6bf8942240419f8b
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 5083
SHA256sum: 8d1b1f78c05fb2079c6dee555e2f24ea2e81a93b83198e0dfe9a0244837a4df5
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 16457
SHA256sum: 373ba568057bfa24e54897c0263d8bcdc3ed426fbec4c327202734ac709ccc60
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 2354
SHA256sum: 4b98d7d46439f3298b3f5eeb54218c59641af44902b04e4f812e536abb4bd630
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 1950
SHA256sum: f2ee751f2f6114641044101ffcb24fb0cf8f43937f5bd2b8e4941d1f9f052b66
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 327680
Filename: olsrd_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 141864
SHA256sum: e71a2ca58b208866384da7952ca4fb8e1f190bd18a29ba0b07abcc5c9910dd8e
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 368640
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_arm_fa526.ipk
Size: 162207
SHA256sum: d7995eed76fe712b335fcda5e8a3c2f68c7b410e9a1ee44df486963dfda051f1
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 358400
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_arm_fa526.ipk
Size: 158091
SHA256sum: 1cf5790b70e4668dfbe22652bc0f241d81a726ef27dac7d96200291d6cd0afef
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_arm_fa526.ipk
Size: 2300
SHA256sum: 7a1134470f15dfde914cc1e803463c15b1ede3dc96b815c6ee0d66b34930de2d
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 532480
Filename: oonf-olsrd2_2022.08.25~1cec9b21_arm_fa526.ipk
Size: 234797
SHA256sum: 3e041cc16b54cc348ee6c1bfbe87c4a264bf3f25a6fd7df6ca323f1a0423edba
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: arm_fa526
Installed-Size: 563200
Filename: opennds_10.3.0-r1_arm_fa526.ipk
Size: 163177
SHA256sum: 30a604959c6c1b9f5a9d463fab4554cfcd3e0f39e65cc7e0e7dc878af275aca3
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: arm_fa526
Installed-Size: 194560
Filename: pimbd_2018.06.19~dbf4e591-r4_arm_fa526.ipk
Size: 83750
SHA256sum: 44a43a30b3882c78bdaa6d7062f84351f27ada6c4b2ed0a8203e49ff05671e09
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: arm_fa526
Installed-Size: 81920
Filename: prince_0.4-r3_arm_fa526.ipk
Size: 28018
SHA256sum: ec022ec658dc45dd6d7333de0c495016e8143347426cb2b2f2524009cedf2686
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: vis_2013.04.07~7710cce4-r9_arm_fa526.ipk
Size: 11133
SHA256sum: dc959e1b7ce03e66784c9ce122c9cd180c102770283b5fb544339f773fb72b84
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_fa526
Installed-Size: 20480
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_arm_fa526.ipk
Size: 9038
SHA256sum: f1ef50e891b18abcf66a7144f9a25b12b9596d38aaaa1327b1cfa901e8d99479
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.