Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: arm_xscale
Installed-Size: 61440
Filename: ahcpd_0.53-r3_arm_xscale.ipk
Size: 22766
SHA256sum: 54b168271a134171a00bfb61e1ad56a47837699da7cafd4e6aed784cad655717
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_xscale
Installed-Size: 71680
Filename: alfred_2024.3-r1_arm_xscale.ipk
Size: 26220
SHA256sum: f9739a7ec476a399f288125f8a9254c434f597d7db8e313b798d930a8d402511
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: arm_xscale
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_arm_xscale.ipk
Size: 4626
SHA256sum: c154e318aaabb184a2d49c2d5e6e8631ce1b629cdf49b42f1801330c08d9a04a
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: arm_xscale
Installed-Size: 133120
Filename: babeld_1.13.1-r2_arm_xscale.ipk
Size: 63244
SHA256sum: 5980ef76d63a637d9261bef2fdfd7f62d05b71effcd6aa89980f02e76fd22477
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_xscale
Installed-Size: 102400
Filename: batctl-default_2024.3-r1_arm_xscale.ipk
Size: 43583
SHA256sum: 042f7dc4a95399b95d10ceef7f5a4f1b1aa29b60879ed60f82f0a534c3f3c8f5
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_xscale
Installed-Size: 112640
Filename: batctl-full_2024.3-r1_arm_xscale.ipk
Size: 50802
SHA256sum: 08c4694caa2497632458084d9724dad0d1312119bc50595c4e4667a357e83427
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_xscale
Installed-Size: 40960
Filename: batctl-tiny_2024.3-r1_arm_xscale.ipk
Size: 14776
SHA256sum: 3d29c928139baaeacf17ed0c5e28125838dc131810a40849639154abe2e44693
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_xscale
Installed-Size: 102400
Filename: batmand_1440-r1_arm_xscale.ipk
Size: 43277
SHA256sum: 934b61a47e01088c3bde29571ab426f3891023b3df5fb107e821a61d031506c0
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_xscale
Installed-Size: 983040
Filename: bird2_2.15.1-r1_arm_xscale.ipk
Size: 385350
SHA256sum: 3ea59442a95c5f4d5975be068b59a3a1c9e93c4c4912f24e9920e47a6aac8859
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_xscale
Installed-Size: 30720
Filename: bird2c_2.15.1-r1_arm_xscale.ipk
Size: 10453
SHA256sum: 6a49d24aba85ca2d0ad4b533d060097022c6f3aa08616a7b6a04911fc60a0c85
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_xscale
Installed-Size: 30720
Filename: bird2cl_2.15.1-r1_arm_xscale.ipk
Size: 9053
SHA256sum: 0dbacc97aba44641aae8003f67542dd9347f0ff3796b4f9f44a6ecb45aa4f03a
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_xscale
Installed-Size: 20480
Filename: bmx7-iwinfo_r2024061001-r1_arm_xscale.ipk
Size: 4814
SHA256sum: b5b553e87e19daa9ecda8abb4b61b588736055ad826bda52169bc23f3e1f76eb
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_xscale
Installed-Size: 20480
Filename: bmx7-json_r2024061001-r1_arm_xscale.ipk
Size: 8476
SHA256sum: 88e4fb833dfefbad7716725e33538393ba388713990bcdd05caa0929c7562092
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_xscale
Installed-Size: 20480
Filename: bmx7-sms_r2024061001-r1_arm_xscale.ipk
Size: 6114
SHA256sum: 68f485492a3873c3a0b02b33db8a4220b5c06bbe9ee1185c756c6420a887802f
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_xscale
Installed-Size: 30720
Filename: bmx7-table_r2024061001-r1_arm_xscale.ipk
Size: 10286
SHA256sum: 00ccb400852c9fb706205edd712d6d4eedcd5e3b96a89dd9c8154622fbce225b
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_xscale
Installed-Size: 20480
Filename: bmx7-topology_r2024061001-r1_arm_xscale.ipk
Size: 5755
SHA256sum: a86315385e2bc33d02986c9abb886783920007cff1557843891631939da06fbe
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_xscale
Installed-Size: 61440
Filename: bmx7-tun_r2024061001-r1_arm_xscale.ipk
Size: 26392
SHA256sum: 720b11c53914d036a307495d424b0d04adfa8c3130f50d44aebb2c03cf3ffae2
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_xscale
Installed-Size: 30720
Filename: bmx7-uci-config_r2024061001-r1_arm_xscale.ipk
Size: 8898
SHA256sum: 876cbfc9c8c0d43cf55110e34addbd65809bf566f8727362123cc01fdeb9c512
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_xscale
Installed-Size: 348160
Filename: bmx7_r2024061001-r1_arm_xscale.ipk
Size: 172927
SHA256sum: dcf7d8462b90f16585a64508183e103ca7475798ae680944f597499922b9959b
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_xscale
Installed-Size: 747520
Filename: cjdns-tests_21.1-r6_arm_xscale.ipk
Size: 345111
SHA256sum: d277cba02f7746c20a5c08a6da7ab3cc9b7b40a10451abff811455cb8e9a33c0
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_xscale
Installed-Size: 890880
Filename: cjdns_21.1-r6_arm_xscale.ipk
Size: 399187
SHA256sum: d7a7026bc64ff678465463804562ab618eb91a1c79b55b4df0231fb9d042888a
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_xscale
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_arm_xscale.ipk
Size: 1420
SHA256sum: 01db2af0612ef34d27c01788776ec250386663c15adcbab869d5118d3930af24
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_xscale
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_arm_xscale.ipk
Size: 952
SHA256sum: 63ac844ad1e6685f261fcb2bb862a231ce9f3443fadf9a0116627d4d1d7bc57a
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_xscale
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_arm_xscale.ipk
Size: 942
SHA256sum: fd5668d2f0ba4a0a857eded5b9e4c0429c1df2a25843f1934a250e3c5a2486c1
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_xscale
Installed-Size: 215040
Filename: hnetd-nossl_2018.12.21~c4376661-r1_arm_xscale.ipk
Size: 94647
SHA256sum: 6fe6ecc56c80ade1a29ed802266aacb88f68effe0fbc8d638e0f8394d1be1058
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_xscale
Installed-Size: 235520
Filename: hnetd-openssl_2018.12.21~c4376661-r1_arm_xscale.ipk
Size: 104372
SHA256sum: d10011cc1e7850e2a3756ca2f3143162a2af279c07c99bf4548f53dae1c5750b
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_xscale
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_arm_xscale.ipk
Size: 6582
SHA256sum: 5d9693f850c194179922e244dde46e5ec56213dd1afe284edd2a5b90f6f2bb93
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: arm_xscale
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_arm_xscale.ipk
Size: 57616
SHA256sum: 077efc9c89a5df1f4e91bba5b303d3c552485c20298d9fc7df39f05bb5b30a85
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7779
SHA256sum: a2484e9641df66e53c28d3bd7d955dcb3c77fd148ee2aed6af84ad618e19e49c
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25670
SHA256sum: 5ae7d974442a83a08b22e96e3359fd4e9c465364aec2ff812376fd2048f89f22
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: arm_xscale
Installed-Size: 20480
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_arm_xscale.ipk
Size: 7240
SHA256sum: 39af4da4a5656f92da78c2632b2df2ac85da37663c50500c41287f90d8b9206b
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2857
SHA256sum: 413660fe12705015607ae0c77b279ba746c4bcf45d7cbb9becc9584547b55127
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: arm_xscale
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_arm_xscale.ipk
Size: 32589
SHA256sum: a88193522bd134577e487221950cce3ca8dc4189547999bdd23907a5898600ac
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: arm_xscale
Installed-Size: 122880
Filename: nodogsplash_5.0.2-r1_arm_xscale.ipk
Size: 47557
SHA256sum: b029424d4e5e51aab2e5a097420bdeb99cb4334ff50797ec7daff7071918aa41
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_xscale
Installed-Size: 30720
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_arm_xscale.ipk
Size: 11148
SHA256sum: c16b9f3c65f8a628cf69b2b69b004803eb0e2a953c39ce690c4beb54f62e03ed
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 10240
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 2773
SHA256sum: b79ef7e84b64fe1bf400e452af0d3469cf43bdb12eacaea103ec31e8b42c8a87
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 30720
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 12954
SHA256sum: 98af1613271233b26906e1f9f6e9dab57bc11b226fed1858f7f5001f4ba92689
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 4561
SHA256sum: b8554e164421171bb50c980dda7817caf23d75614ad14d90c0302468e137a5d1
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 3059
SHA256sum: 8bc5a1c3b782d7ebb0f9afa58bdc863546164b01103d5193e95a1d41a41e0671
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 4744
SHA256sum: 8a03331d707941567744f1ac77ff2fce1061fbc193f0b1f0639761aa99074819
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 3286
SHA256sum: 59915f23466ee879643952f5908b0aeff943668397cf748bc3abbf2aa74bbfd1
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 33478
SHA256sum: 2672b39b6560ae81d1bfbb5e9ac2d4d8080fb9fd00f9df355f762e011b732ab4
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 25422
SHA256sum: 9671b98a44064c0d3d75e6db91e27198693e1961b382d7a472ff89439a7347e0
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 30720
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 9797
SHA256sum: 52316e5578ee7532d86467c6e9b27eebd0c6c08458fda4665e9e3ac3d49a67bc
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 30720
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 11692
SHA256sum: e380545b9b21bc4242d00ac13bdb6cb0279f3630309e0b0e789f3253c3be0299
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 40960
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 14492
SHA256sum: a1648a4898d774556522579f71511189849895086a598e337b4f254d34ff0578
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 20480
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 9012
SHA256sum: da2dd4d5ee2ee29ee3595b6a074f1c805663722de8e9acef810994c3fb378cf7
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 3631
SHA256sum: 2f36aa916443bd79ee49ad5ceeae892316c98e6523c1ecea07159d09516d780a
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 174080
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 61416
SHA256sum: 008d0ddc8190b29d0279a3a7849657c6abd29931028558455874afe546be3901
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 20480
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 6833
SHA256sum: d656a06cf10635c06c631fe4af2ada8457645b1b2ceb668222cfa7e45201edc6
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 30720
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 11072
SHA256sum: d21ba1a088011a34799c5b02ffdb1240913a1073868dee20f0ac9bef6e9a6d81
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 5089
SHA256sum: 84e3726610398f6ee7dffa0dc0db69c457581ef94c7d03e02cd34f6290e88036
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 16417
SHA256sum: aed72b443bad653cfb38ada02d07cb2d3663e152322e3083d368fa135a9aaa7f
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 10240
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 2349
SHA256sum: 4deae2ccca7734048502e339cadb1c505df7d6a47415816e657202c371a9f9da
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 1953
SHA256sum: 48fdcd66fb53780b74afe03f30e26de1e1d9da237b79074c99cde844c08c8a95
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 327680
Filename: olsrd_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 141794
SHA256sum: 0e8848bca25b630b29111af4b6d7fccf19e9e22b7b6b0beadb53d97ad8fd34ce
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 378880
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_arm_xscale.ipk
Size: 162342
SHA256sum: 18a743e80a7f1b0cedab34fdb5297dd76b5b07bd9962577e1271246ea275b4fe
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 368640
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_arm_xscale.ipk
Size: 158297
SHA256sum: a3551a593c141480e922572b952e74c4d0c402085114fb11408a45f763040592
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_arm_xscale.ipk
Size: 2295
SHA256sum: d68beaea064ff196940789842f5238369edf54a9d1a74a39fe8c2a30f4fe2a5c
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 532480
Filename: oonf-olsrd2_2022.08.25~1cec9b21_arm_xscale.ipk
Size: 235579
SHA256sum: 757f80a47e5f0f96de50777eeb458a9d855d6c76da2953ef4a609252d052890f
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: arm_xscale
Installed-Size: 563200
Filename: opennds_10.3.0-r1_arm_xscale.ipk
Size: 163030
SHA256sum: 94823fe39fd2d9ba7c2b94d61d589013ce041dd738809206af450bb68e0a5c1e
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: arm_xscale
Installed-Size: 194560
Filename: pimbd_2018.06.19~dbf4e591-r4_arm_xscale.ipk
Size: 83705
SHA256sum: 4cb9cbc58626a2057b32ad476a7091074fc86334868833cca97f08d51ab46e92
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: arm_xscale
Installed-Size: 81920
Filename: prince_0.4-r3_arm_xscale.ipk
Size: 27932
SHA256sum: d32620cc4f66fb7c9cb4f7e33e8ff4719525893507504c42cef4ea0f4768cafb
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_xscale
Installed-Size: 30720
Filename: vis_2013.04.07~7710cce4-r9_arm_xscale.ipk
Size: 11132
SHA256sum: ee7c3898e82497a4dc7b1b55d786a6d0f590233d912b6e042ce5f071d2439169
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_xscale
Installed-Size: 20480
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_arm_xscale.ipk
Size: 9016
SHA256sum: 47c8f5e61f4217cc53f1d5be163ecaea1916a3142323cd6bcd4fd0b369a2b325
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.