Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mips64_octeonplus.ipk
Size: 25634
SHA256sum: 5a59c6c43587701e7033e3ee79d237addee37fa2947509911dfc83d53066eb14
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 153600
Filename: alfred_2024.3-r1_mips64_octeonplus.ipk
Size: 29477
SHA256sum: c5bf806e309f108ac0f10c59b8c7e1fc244baf11075ec005b835e52537b254ed
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mips64_octeonplus.ipk
Size: 4993
SHA256sum: da6cfb6731c08cdcf4eb95c081f33a9c28ee34fdab578ec83590288b93082ee3
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mips64_octeonplus
Installed-Size: 225280
Filename: babeld_1.13.1-r2_mips64_octeonplus.ipk
Size: 74049
SHA256sum: 0454cd3f4470bfb85e9958848387dd19e2701cd0ea0394d2dbafcb6631da8f02
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: batctl-default_2024.3-r1_mips64_octeonplus.ipk
Size: 45648
SHA256sum: 6c33266f28e49b4d7b101857ab943b10dec19f5112ab93fd0a8726b806d48495
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: batctl-full_2024.3-r1_mips64_octeonplus.ipk
Size: 52732
SHA256sum: cb8b417f9beeaa10fb0e5173b0a3ecb45cfa8cc75ff0c802882824833669a704
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: batctl-tiny_2024.3-r1_mips64_octeonplus.ipk
Size: 15852
SHA256sum: 2aabf7982251e8246016c0f27c9f91c8fb4170f488d53bfb86826cb1f692609f
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: batmand_1440-r1_mips64_octeonplus.ipk
Size: 43913
SHA256sum: 8cc273107ae27c9ca805e2cc19d65fd2b9a25a29544b3030bc0b6681a9e55c36
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_octeonplus
Installed-Size: 1218560
Filename: bird2_2.15.1-r1_mips64_octeonplus.ipk
Size: 412813
SHA256sum: 1ec0ff4bd722ae0c575a5805d6e2b4ea4013152fd738e738a262038ed72eee78
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bird2c_2.15.1-r1_mips64_octeonplus.ipk
Size: 11075
SHA256sum: d092983e50017a06df4ef9e13110a903aed42163f92bbd11c0dd059797714d4a
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bird2cl_2.15.1-r1_mips64_octeonplus.ipk
Size: 9650
SHA256sum: 9ab806192d2d6d7bda4cbcbe684151e2543c0ae835ad70fc3d86a6274843e5ec
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_mips64_octeonplus.ipk
Size: 4684
SHA256sum: 4ebfd0108d97260beb851f3227727c43e82399fbcf950fd1f17cc8d9389c8de2
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_mips64_octeonplus.ipk
Size: 8420
SHA256sum: 6722de81885c7508c2edbde2720d21e91d3ee07281f7263cf833a2dd5005526b
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_mips64_octeonplus.ipk
Size: 6226
SHA256sum: f155bdb912996c4e67155dafa052a17be672287f4b371ac71f5a836c66f0ff9b
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bmx7-table_r2024061001-r1_mips64_octeonplus.ipk
Size: 10187
SHA256sum: 41a278122dd8fdb949d68801e0939198dc7991b34f7c899a8457759b50ff9500
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_mips64_octeonplus.ipk
Size: 5622
SHA256sum: a00e4569bb6d5457bc5d62c03318811f4e22a4cfad9cc5aefaec90e9b8e7435f
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bmx7-tun_r2024061001-r1_mips64_octeonplus.ipk
Size: 25677
SHA256sum: 6b4056a660abe393ddc39eae1370abb7c510008266b8e600f72216617f2a801c
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_mips64_octeonplus.ipk
Size: 8944
SHA256sum: 6a0f4410cdcae9f35f494562cf66d25a538031d2971b129942587b7c7dd409b0
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 440320
Filename: bmx7_r2024061001-r1_mips64_octeonplus.ipk
Size: 165025
SHA256sum: afa74c42947fb8e2f7cc9ab51c5134a58b7f790ea1d114b926a4cf22103835ad
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_octeonplus
Installed-Size: 839680
Filename: cjdns-tests_21.1-r6_mips64_octeonplus.ipk
Size: 328058
SHA256sum: 8fdf1c42edfe79eca3c1e042e944ae43e9ab0c7d4b336d1a73c37d3005651deb
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_octeonplus
Installed-Size: 1003520
Filename: cjdns_21.1-r6_mips64_octeonplus.ipk
Size: 384415
SHA256sum: d704d7b03c7e5dc7a31e80eaf7ed42f6a9e57b57d16ef79f63d3d0a8480dadea
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 1424
SHA256sum: 80cbfcd9bfbc0eba6579e639868eb2307feb16b2c8ff32dfe970ac10b308aa9a
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 962
SHA256sum: a6cee6f8f40b8c5ba329d26bba5155a7e76df9c5f805a4e12e6ffd9c4a2e9cfb
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 947
SHA256sum: ece774a5e2aea3c5c52ff34e5b1a0300d8b767cf70cfd316a2fb6bac9e312129
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 307200
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 108074
SHA256sum: d5221be83c4f6ea7676bca964f0397789a13b042e4886d3d3e0eb792a1aab961
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 307200
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 119468
SHA256sum: 7e25ac5cdccc8903378fd1ff6d3441aa3450405b4fd483f2274b7188219a2cc2
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_octeonplus
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mips64_octeonplus.ipk
Size: 6589
SHA256sum: f20e7cd079043ce7ff9445dea51072949648ddb546f7aef4c741f3ddbefe5c80
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mips64_octeonplus
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 57621
SHA256sum: 721a7942950303e7a64a86318ee5677e938cf2a0b4a603929884d01f275e765b
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7779
SHA256sum: a2484e9641df66e53c28d3bd7d955dcb3c77fd148ee2aed6af84ad618e19e49c
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25670
SHA256sum: 5ae7d974442a83a08b22e96e3359fd4e9c465364aec2ff812376fd2048f89f22
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mips64_octeonplus.ipk
Size: 8323
SHA256sum: 0ae2bba8f0fbd63e859587baa70470aec742dd8156de2896e56d9517244311b2
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2857
SHA256sum: 413660fe12705015607ae0c77b279ba746c4bcf45d7cbb9becc9584547b55127
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_mips64_octeonplus.ipk
Size: 41367
SHA256sum: 0b807b7ab696cd9fb466d5f9f92007d48b7ead865874859046ef88a0d39e8b93
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mips64_octeonplus
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_mips64_octeonplus.ipk
Size: 50555
SHA256sum: aa93ac0f0f70cd27799c9e581ffcc19a5cbc4c871423edd6c5828a036e282349
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mips64_octeonplus.ipk
Size: 13053
SHA256sum: f498a08af4e3ad16518098e30e68a14959a0cea66300f5dc8321f5cf9ecd573d
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 2778
SHA256sum: f4a8982dc8fd11523f5c30093cc594267aa8b559208fc7ab125cbf97eb5a8861
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 12745
SHA256sum: 9017e5d7aad4471300a301dc0158c3cb5a1d4a709f38897c7ed59860d4621cb6
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 4502
SHA256sum: e4516c1c2a2397f01ed7c2e3812ca6b9b4b0f85662727e266fb17d9b59f2f6fa
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 3120
SHA256sum: e2628d88a0eaa92f4b94e5a536e635b105a79b7e2cd2607c7ed7fc368b00370b
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 4953
SHA256sum: 7b3b8ba5e01b06d133aa9d3014115cfd0f1d4bdc7e07099366fe2ba0ab8ee915
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 3367
SHA256sum: b9cf7b19a58942e486ffbdf62eaab9c6b8c8a91cb88a2608b13d1394226fa114
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 31219
SHA256sum: f98fe1cf077d9edc09b74107f2233bb848fdd3b892e63820a515a7f45e25e674
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 21622
SHA256sum: 235928a06500a8c8257a7e5e67f1e9acd38c363d40bfe976f9661fb9e5425f80
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 9545
SHA256sum: 75374bb2a9a5053c5de57efdc29af5f19a1d7ff3495b187bfc4166a26f923a2f
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 11737
SHA256sum: c2737e3d428477183a96a4a8f78656e96b35d93907101647fdaa66bdc643e663
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 13253
SHA256sum: 22ec522678ffbde99f23754964d526f7bc60fde280dda19f02399879f5661e47
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 9226
SHA256sum: 2cb3c3fc49300084fedce7f2123439099221fb7b513ffef241eededb2fa12b3d
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 3659
SHA256sum: 6c90a98169e79d7b5653cf26a66b09573a6db700527aec38f02debe4edb2db4a
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 256000
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 57593
SHA256sum: fe8f1d54297cf5eb15ce412e7ab831ce473e9996b27b99be778319edb33a07ba
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 6995
SHA256sum: 0304fcd1ab9517af43beb3120aa4c003cc6b4681180765e497a564ffcf96f616
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 10945
SHA256sum: f91a94b6169e656bc593b6f86dea63e7384371f1dc14ba978a00e4adaf395835
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 5203
SHA256sum: b92bcd9b3612e372b2dc4373fa9bc551549e8b813db61a98ccef1d5f1c186a56
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 15128
SHA256sum: a75e017e6b563200c201ab25b2cae1fde8a0ed1a59998377eee99c6fe3444937
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 2464
SHA256sum: 6a3020c19d66670a588d0cc6ada4f3742a3da2a80faf77b3853966130f7808a5
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 1956
SHA256sum: 5902f99367affa610328b9d7195ab3138bb8d3461704027859ebf1a9a333293c
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 378880
Filename: olsrd_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 134172
SHA256sum: df37383a7b3270e149bd49b2dbbed49d5a09fe010bd38a8d4f13dc200bf91eed
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 512000
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mips64_octeonplus.ipk
Size: 168884
SHA256sum: b54357a56e0386ced710ff9a4f81f932b045bdd1ab3a1fad8e339d31a3d06af5
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 512000
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mips64_octeonplus.ipk
Size: 164423
SHA256sum: 5c9a0a4b4eaa4893b6f829feac367409e0de307198aa75fcffef1ed53b8ea704
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mips64_octeonplus.ipk
Size: 2301
SHA256sum: a674d021d15bca0f6059843e3ffd255120f10a8d2ee9a33cbb09d5a7b9a11147
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 727040
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mips64_octeonplus.ipk
Size: 244541
SHA256sum: 50a59e5a1a2a0ffe426930208fe69ffc5fadda2355dd585dac900f1cc15166b5
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mips64_octeonplus
Installed-Size: 706560
Filename: opennds_10.3.0-r1_mips64_octeonplus.ipk
Size: 163647
SHA256sum: 4ed404f718ac5bef8fbbcde7d3248d49680c46e0751c203fe2519fdbd3dd6dcb
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mips64_octeonplus
Installed-Size: 286720
Filename: pimbd_2018.06.19~dbf4e591-r4_mips64_octeonplus.ipk
Size: 88545
SHA256sum: 2a21adf56664876766d9ea12fedfed36a6bb03bea5ec16316959144e652990eb
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mips64_octeonplus
Installed-Size: 215040
Filename: prince_0.4-r3_mips64_octeonplus.ipk
Size: 34999
SHA256sum: 6e7ae31a81694ca73b830df3db37358cf6751888dd39024b86cd1ace2e5aa00e
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mips64_octeonplus.ipk
Size: 12797
SHA256sum: b5a0fb06a15ec0fa4a91b8cc5ab89844113ed770336ea716b987f0413b50786a
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mips64_octeonplus.ipk
Size: 10762
SHA256sum: 9585c3adc98c0d282648687ec44ff1794e7e551fed88e475c33ccac21e835134
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.