Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mipsel_74kc.ipk
Size: 20360
SHA256sum: c7c96507f484be9515f4fbdef3c2ada85626520e597fdf7ae54c060b2c45d555
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 143360
Filename: alfred_2024.3-r1_mipsel_74kc.ipk
Size: 24816
SHA256sum: df00794656c0f33648d6a1a6b29bc091efa4f343755492e1deec752b509ebac8
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mipsel_74kc.ipk
Size: 4273
SHA256sum: 1cf56e80781a8342d001786dadff5e3c91d9b2f5ef059a414b819ebb9066877d
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mipsel_74kc
Installed-Size: 153600
Filename: babeld_1.13.1-r2_mipsel_74kc.ipk
Size: 55338
SHA256sum: bd8377e2fe281e597d405bdff526145661b39b2fb18ab200a2327429d972f65c
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 143360
Filename: batctl-default_2024.3-r1_mipsel_74kc.ipk
Size: 38165
SHA256sum: 3b9dae570434ad07852960090ee0789af4ee5fd530f17e3f7221ab8a46705765
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 143360
Filename: batctl-full_2024.3-r1_mipsel_74kc.ipk
Size: 44453
SHA256sum: 6b1999fb35616a0142e8e1d2de0a970e03c577b38f891ca9fde0fc64903be993
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: batctl-tiny_2024.3-r1_mipsel_74kc.ipk
Size: 12925
SHA256sum: 465243ddcb64f65b6e64e1ef0b33ceb70e3c5ebf5dcca76d0fbbd1d4d47832cb
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 143360
Filename: batmand_1440-r1_mipsel_74kc.ipk
Size: 35875
SHA256sum: 6f6c89561f6bccd5273fef8ac945ae73adfb0bc1386fe5d0ebd823ae21de9cc8
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_74kc
Installed-Size: 870400
Filename: bird2_2.15.1-r1_mipsel_74kc.ipk
Size: 355024
SHA256sum: f3fea15ece3850d1f83e1f98f1af7f514c971ae630d3413aa439de47f0acf04c
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bird2c_2.15.1-r1_mipsel_74kc.ipk
Size: 9794
SHA256sum: 08c716c1ad4807ca0f92b405d95f1665594b517712a5d249fe91599c3e76fa49
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bird2cl_2.15.1-r1_mipsel_74kc.ipk
Size: 8604
SHA256sum: 1ab9539d1b0b036dc9fa797887dfceea1746579c7a0401f576381b52b4f08397
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_mipsel_74kc.ipk
Size: 4663
SHA256sum: 1aa2c5e66ba73444525960a3312824f875d5dd3f4e5505744ccf51c267adfade
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_mipsel_74kc.ipk
Size: 8046
SHA256sum: 12b9483f1fcfb6c00acbcdc21a260ec65fa5b5755b38681db550d0c3ffa855a7
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_mipsel_74kc.ipk
Size: 5916
SHA256sum: e80e5af9ffe3d832465a9e93bb1b8f9760747bd6d85d33343bbcc0220ca2d2d0
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bmx7-table_r2024061001-r1_mipsel_74kc.ipk
Size: 9577
SHA256sum: 06cd7f847f007a81ba6690920453f8e17d2590e3952c8b5869a42f5e06150f39
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_mipsel_74kc.ipk
Size: 5626
SHA256sum: df5203fee4ec8f8c4d8a70598bb29b04de850713fef11e1b5749a7fa31bb8a82
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: bmx7-tun_r2024061001-r1_mipsel_74kc.ipk
Size: 24751
SHA256sum: 0fe88ce82bbf3f34c9efa0736311a2e6be572ef1194f05a9252c51d239aea4f4
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_mipsel_74kc.ipk
Size: 8298
SHA256sum: 50b6169ddcbcefcb7f8b4b086ba3b4f150ff090b0d7832b35942c1b48634374c
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 358400
Filename: bmx7_r2024061001-r1_mipsel_74kc.ipk
Size: 157148
SHA256sum: 5115ef6d79c98acbb3f53dcdeee079114978086318f18429da08c3d404f3d820
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_74kc
Installed-Size: 696320
Filename: cjdns-tests_21.1-r6_mipsel_74kc.ipk
Size: 334121
SHA256sum: d79b44b64c9f1aebd7cb06102b4e4376631dd82a3632a4089bae56fb13000cd4
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_74kc
Installed-Size: 931840
Filename: cjdns_21.1-r6_mipsel_74kc.ipk
Size: 402326
SHA256sum: b4eded2a4cfceba62d05314162cf8f8a2563d2e81b2db275424a86769b0a8c1a
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_74kc
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 1421
SHA256sum: 231d1d55beb04d104c97217f15dc597d3e01dadc361682d7f85644d8765f52b7
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_74kc
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 954
SHA256sum: 52cdc00ba85362b3c295ac0b1412d8906f0f6a44577380e73b0c8d8921dcd261
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_74kc
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 947
SHA256sum: 6540053f09b000eecf7317616316edc0c4a947259c99e0ab02e75151728a5a58
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_74kc
Installed-Size: 163840
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 85126
SHA256sum: fb5914da112f5c7f226ad79bddb52c1a6a5cb70ee3d157397442a2ee0d257257
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_74kc
Installed-Size: 235520
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 93647
SHA256sum: 29dca11f93cb8359ce31b6254e107f1a82b106a268c4e9881408939176f8e84b
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_74kc
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mipsel_74kc.ipk
Size: 6583
SHA256sum: 6cd8a468f3b389c5629678779e1572a27a656c667a3bf0faa9b7e9a6be59e2b7
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mipsel_74kc
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 57620
SHA256sum: 1be5114a0f06ec57bc1b797772fb46a1e9a44e97afdc72cce171c77b81841dbe
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7779
SHA256sum: a2484e9641df66e53c28d3bd7d955dcb3c77fd148ee2aed6af84ad618e19e49c
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25670
SHA256sum: 5ae7d974442a83a08b22e96e3359fd4e9c465364aec2ff812376fd2048f89f22
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mipsel_74kc.ipk
Size: 6635
SHA256sum: 01c03c0b102ab1597cfa7ea3a2ffc84b655d839d33714c62819e43688dbaa471
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2857
SHA256sum: 413660fe12705015607ae0c77b279ba746c4bcf45d7cbb9becc9584547b55127
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_mipsel_74kc.ipk
Size: 27799
SHA256sum: dc1ae8b66ccfd590570113960209cc440fc5e47426fde84070c322b57596ee04
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mipsel_74kc
Installed-Size: 174080
Filename: nodogsplash_5.0.2-r1_mipsel_74kc.ipk
Size: 43180
SHA256sum: 045fc51320e2259a8ca25d3a1972dbb8b2d8d907eb8cb93abc437bd1a6e0edb0
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mipsel_74kc.ipk
Size: 10198
SHA256sum: 1710903e72ae1106f68550852becfbd9899d5da4c3a3fcff733889b74b1af977
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 2752
SHA256sum: 004e4750bc7abdeedf937faa0c3fbe7f9ceee6c34a2cc68d5cad20117b06aa1b
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 11741
SHA256sum: 2d5863ddac9a2e01d9338d660cfd40454c5bae132d42fa651bff2bfdcb029a00
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 4365
SHA256sum: fa46f66192285e01ebbcbb74a9725384d329b31df1cb0b44c005c2d2f77eb181
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 2921
SHA256sum: e36548c79c53f43505c622758ccc5abb9867d4d4599f09a740de46e4dcbbaedc
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 4450
SHA256sum: 84f27084d812388f1451404c0a10b1aa3d2f1fb45ba4c1e494e8ce5a96079333
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 3184
SHA256sum: 2673a09a4638adaa900ee3177cc332a445916fcaffdb2277a374e04bea651438
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 31114
SHA256sum: 2129da586d34c306f8b2eb0c0442b9e1db9a7cb60c4f8afc78f2fc4ff19bd238
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 21550
SHA256sum: 8597fac555dfbce16a0c6511fb6ba5480513eb7a6256b8832651a1e65f950b34
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 9049
SHA256sum: c7bd328a462679dffab9d94d4dc4b745b092e15607dc12f369ce12ee517b5be3
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 10832
SHA256sum: d5e4f5415dd475a0e779245919ee7c9c981eff6e73091181f1ee761d4bb3aa42
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 12630
SHA256sum: ce5008f6867b89e819ab606d78d0e7103ea73a28ae79f742f71cf4697f2c5a40
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 8593
SHA256sum: eb276dcc9a882988e10f4c901d886afa6851f1696cec3af0dd126c3dd25b9806
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 3523
SHA256sum: c04303f8d24f3c7a12ec1fbf9aead894a617948eae83d97380c20c1a5e9957d2
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 153600
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 59110
SHA256sum: 5edb3acfdd733cb34cf5af1eaa44f92af7c168cee41bf24642cf3d8305f0fede
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 6572
SHA256sum: 89d7c7b79cea16a6525e817d9a7840a58c611a7e899a43a164aa18d6547311ae
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 10635
SHA256sum: 83d1e67f57089be7fca1ef3163df3306b9bac42b545c78015222804b840371bb
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 4998
SHA256sum: 07a8e8a8e646945ac4bc3b5aeac0267ce28e063deb279d18fb27ceac93ba04a4
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 13924
SHA256sum: df43682a6c70da4fea6bd5310538231b3857d36cffd5ece7e283781f2bde8d42
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 2445
SHA256sum: 2ac48a7fd7216d055261e4aec04baba57c7c907b9a0a41a565447a762b3bee81
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 1953
SHA256sum: 267a97d8909cc3cee78072a186af859addacc325e81b2ede84a2760aece138f5
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 307200
Filename: olsrd_2024.06.09~d72be9ad-r1_mipsel_74kc.ipk
Size: 127934
SHA256sum: 8d63da901720a36cd02982314c1aa575010eec01c4ccae0b7e8495141c9c7612
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 296960
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mipsel_74kc.ipk
Size: 137586
SHA256sum: 04f17c26aeb9b4cd67915f265386d23698250e52e642fef62f01c3e897d0be2d
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 296960
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mipsel_74kc.ipk
Size: 134231
SHA256sum: 18c9e630948dc7bf1b1f1cd8e28d0d28499a2e6cb52b4052eea02cc8c16db953
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mipsel_74kc.ipk
Size: 2298
SHA256sum: 1c5bd3962d564c847e4ed0e1f43ad4f381b1acca016f5942e6354503ff1d6b0c
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 440320
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mipsel_74kc.ipk
Size: 198697
SHA256sum: 588c7cfc5e5f7c1df8cc7bb7a0d87001fa40dbee8bf50408521011d828f0a68c
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mipsel_74kc
Installed-Size: 634880
Filename: opennds_10.3.0-r1_mipsel_74kc.ipk
Size: 156717
SHA256sum: 259eee8feb03682cfc22a4abc1fa0a36a1e4d82c9f411458853895c2771024de
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mipsel_74kc
Installed-Size: 153600
Filename: pimbd_2018.06.19~dbf4e591-r4_mipsel_74kc.ipk
Size: 72885
SHA256sum: f7ea4e762a8da3f37671cf35c1dffa3a2222a5c338763e486cc15abbc1d27ac3
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mipsel_74kc
Installed-Size: 215040
Filename: prince_0.4-r3_mipsel_74kc.ipk
Size: 34203
SHA256sum: cde9b2f7ce3353fb4151b18047db2c7e4e8b1f84ba239e9212914220c9be8cae
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mipsel_74kc.ipk
Size: 9827
SHA256sum: 13b62a4b68b66e5d32996dc7e33026d7b39493bc4be5011763a8a4340dd12f8e
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mipsel_74kc.ipk
Size: 8138
SHA256sum: 80a9a15fbe75320376607f019d9a3997550f8040cc70cd2e2701023ddaeb244a
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.