Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: powerpc_8548
Installed-Size: 81920
Filename: ahcpd_0.53-r3_powerpc_8548.ipk
Size: 27483
SHA256sum: 78a93c23dfe83d1fe72c334ae89f35a603f746e64db7cfcfdf7c0c90bec7bc34
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc_8548
Installed-Size: 143360
Filename: alfred_2024.3-r1_powerpc_8548.ipk
Size: 31351
SHA256sum: d2f2d2864ab8b162951384ef8f570030e251935bb5cd69da562ad5c8e341e728
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_powerpc_8548.ipk
Size: 5156
SHA256sum: c06f77eef5b112faf0243c82c860ad556053c9b70c0d47dcb7bd29b23fc6fce5
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20250102, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: powerpc_8548
Installed-Size: 215040
Filename: babeld_1.13.1-r2_powerpc_8548.ipk
Size: 77314
SHA256sum: a130f2e6693f3d34f8165696152a304594a4d736abfcfa43b6e47dca737667d0
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc_8548
Installed-Size: 143360
Filename: batctl-default_2024.3-r1_powerpc_8548.ipk
Size: 50143
SHA256sum: e3dd05d300116e15ad4bbf1be88fd1dc86c7aef90bad611d8e1c141192d594bf
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc_8548
Installed-Size: 204800
Filename: batctl-full_2024.3-r1_powerpc_8548.ipk
Size: 58229
SHA256sum: 4ab16ebf7ae73fb68c4cb8a1a0ebb61c4670fa92ce0138b4bcbd5a1a64b444ee
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: batctl-tiny_2024.3-r1_powerpc_8548.ipk
Size: 17675
SHA256sum: 41a9689014b08592e153e5a00e99fa5403a6a221a773f4c12beaae4069553b70
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc_8548
Installed-Size: 143360
Filename: batmand_1440-r1_powerpc_8548.ipk
Size: 49136
SHA256sum: efbbb02a1d2174d75567eac860a4c1b7f83da31b15b45eef5cc5aed12821ff2a
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.16.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: powerpc_8548
Installed-Size: 1402880
Filename: bird2_2.16.1-r1_powerpc_8548.ipk
Size: 490329
SHA256sum: d855ec397fb14179a0e8f74edcaa9818afc1dca7b57cd3724a90701554728ebd
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.16.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: bird2c_2.16.1-r1_powerpc_8548.ipk
Size: 12289
SHA256sum: ad84245b0ddd27f14a11ae62e2739a9c6f7914cfd12087016ca0d912cf380c0f
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.16.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: bird2cl_2.16.1-r1_powerpc_8548.ipk
Size: 11124
SHA256sum: 6742b44de31e81a2db0a1516ab2af6716be81a8c18e12b0edbadeb641cf78bbc
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bird3
Version: 3.0.1-r1
Depends: libc, libpthread, libatomic1
Conflicts: bird2
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: powerpc_8548
Installed-Size: 1617920
Filename: bird3_3.0.1-r1_powerpc_8548.ipk
Size: 593250
SHA256sum: f09423f3cd9e3e48f12ab2d5c190c9d352b9884312a09e00dcc26fa4d78aef33
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 3.0 branch of Bird which is a multithreaded rewrite.

Package: bird3c
Version: 3.0.1-r1
Depends: libc, bird3, libreadline8, libncurses6
Conflicts: bird2
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: bird3c_3.0.1-r1_powerpc_8548.ipk
Size: 12407
SHA256sum: e12a8c6454245a830db99ea265c2b83e2712e17d50cd6097a2ffaa8eceab9895
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird3cl
Version: 3.0.1-r1
Depends: libc, bird3
Conflicts: bird2
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: bird3cl_3.0.1-r1_powerpc_8548.ipk
Size: 11230
SHA256sum: 75d91f605ce7ae1a1e85c504312298109055213a0fa7086bffea1619d941022f
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc_8548
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_powerpc_8548.ipk
Size: 5352
SHA256sum: ef2309f365c65fc710509df45bf92c37805139d4c82c24c03a1cf3522f7d13e7
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc_8548
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_powerpc_8548.ipk
Size: 10043
SHA256sum: 449c9c555703efcff6c1c6fcbb163c728d69503bc46adcbafdf9734f8c7b6bfb
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc_8548
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_powerpc_8548.ipk
Size: 7324
SHA256sum: 5c93ff376f3c5a764704fd248d100c81134f681a283746f08719a0dda5514edd
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc_8548
Installed-Size: 71680
Filename: bmx7-table_r2024061001-r1_powerpc_8548.ipk
Size: 12181
SHA256sum: 368895d9676ebb6ebf1d85eac79db8148f1a54683b7e9d9aa6d0e955044c8b72
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc_8548
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_powerpc_8548.ipk
Size: 6941
SHA256sum: 12268fe0a2562a5d5aa45865c21e3ec2fd64b33041b5af6d19b9eb631535970f
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc_8548
Installed-Size: 143360
Filename: bmx7-tun_r2024061001-r1_powerpc_8548.ipk
Size: 30789
SHA256sum: c2b77f476c004c8165cc7bcbdad5cc42a23214c45a36f2115824230a6357f4da
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20250120
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc_8548
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_powerpc_8548.ipk
Size: 9949
SHA256sum: ab56d7e4274b4dc8ce13e9fb3d308a05d18d19203197b4134a6f2fcad8e29448
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc_8548
Installed-Size: 481280
Filename: bmx7_r2024061001-r1_powerpc_8548.ipk
Size: 194303
SHA256sum: 69006132eae5f8580970aa402340368e46a8bf4464b4848feaf2040eb0175d5c
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc_8548
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_powerpc_8548.ipk
Size: 1416
SHA256sum: ace0ee523347ede6d3859a7dcdc11663a40245903d1a348cade29435da5ac6ad
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc_8548
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_powerpc_8548.ipk
Size: 947
SHA256sum: 34e3a5e026658a3a085f83164e5af6f8eebecac49bf6ae61ebba08fcfdd78e24
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc_8548
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_powerpc_8548.ipk
Size: 936
SHA256sum: d1be5763b44132e2e4a544074d120e89a934927a850083bd4c1daa8347dc55b5
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc_8548
Installed-Size: 296960
Filename: hnetd-nossl_2018.12.21~c4376661-r1_powerpc_8548.ipk
Size: 114356
SHA256sum: 88f5224cf9f6e2a08b89a5ba2133e75fd7cc59e0817e1df1b3c75aeed9e51528
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc_8548
Installed-Size: 368640
Filename: hnetd-openssl_2018.12.21~c4376661-r1_powerpc_8548.ipk
Size: 126867
SHA256sum: 94a44b7ad9535530b93744da490ce40eb33067277337da3ad0ee457c4f5020b6
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: powerpc_8548
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_powerpc_8548.ipk
Size: 6586
SHA256sum: de46803b049501ec177df719232f33ff4c1966a0b0c18965fce154952f3bc91a
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: powerpc_8548
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_powerpc_8548.ipk
Size: 57618
SHA256sum: 7c23755be67472734ade33aa581f9cfaa5f12fe03031b6ba9b55230bab91d7d7
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: 038dca35183f285e872b997bd692c8fca4558224fa623e94cb1799e6a42da66e
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: d29b28ece48700f93fea07ff9e20003b87081806597ad8b648f072ead063d94f
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: powerpc_8548
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_powerpc_8548.ipk
Size: 8816
SHA256sum: 739a66cb948c2c57c2201d50beac9d51226f538844da076f98c0274c6099f716
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2850
SHA256sum: fd5677d800533c60e7151c97acf8b0dc71059920665d225b19248a860e87fa3c
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: powerpc_8548
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_powerpc_8548.ipk
Size: 35573
SHA256sum: c4f34c19eb69b8dd2ecf18bab3ad48b765fb1062b32ba31ebd61d9ccc6db3323
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: powerpc_8548
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_powerpc_8548.ipk
Size: 51757
SHA256sum: 760681304d1f142d5b5603713c28e908cdc9b3c664fe70ad4f79c8d418fb2786
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: powerpc_8548
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_powerpc_8548.ipk
Size: 13640
SHA256sum: dceac0cc3f2f45a4f88e2924e9dec5523fb6af4034c9a355414662a5b7e0a8ce
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 3147
SHA256sum: 4a61399d0ac169357a19a7c60dd61f2c67d91c80b54af45ad80796c75890ee5d
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 15190
SHA256sum: 38c2017b30ae3b5ed9477db468fee7458fddc0481b054c7024a814854019278f
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 5282
SHA256sum: 8b8fad46590364cb8e1d65a10ee4ded4b2ec7e88278b11e2dc07f438ea76bd6e
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 3668
SHA256sum: 8c93e682e94de2d567665b708124fe269a890ca92e78dc60184f48a56afeae2f
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 5640
SHA256sum: d74d15844ef72cc3f400a0262054fbd49df804d51fc746784009eba253b6d7c4
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 3864
SHA256sum: 252aa650e9d1da07d6873ea1c3c1fec3bfed286ddcab7b2acd809367aee38ac2
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 34384
SHA256sum: 32f6ae0e255395fb9bf0bc4be53bfa7e4582471910c72aee19bb35a94d9e4586
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 143360
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 26911
SHA256sum: 0f664475b0848bad2c39bfba79f76f2078b79efa9120d0c3fc8e5d097b2f2ee3
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 11637
SHA256sum: 917811b2901ef181e82ea1541b1e84110c157a32174db12801d2cd53cff5f70b
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 13793
SHA256sum: cbfc999cba1759b09c259a9181acee74f4e877f09a2b4bd54cabbfc980b6bfc7
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 15789
SHA256sum: 0bb118193b421a98eae0d28c06f7d8da6a6432f0d125015243c097d07bfe5a2a
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 11362
SHA256sum: 210a80f8217a22f1ce2363a6ae65fc557f5dec08d541e3046ff79acdbdd3bcfe
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 4124
SHA256sum: a127466c3e5b0b2260aae3626cf7bb07492e5529a52f8260806c7929cbd5d315
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 337920
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 72719
SHA256sum: 8a97ffefffa2854cd3367b52f29ba32cf5ed466e830ed4e8babe109e24652813
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 8624
SHA256sum: 1f07f86dab51394c67cdba76306926ad06bc2a674542f62fd317b00443553226
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 12507
SHA256sum: 50f5867dfa87b17dcc70738c5295363f0a52b7e720cd6f54440344e85f104664
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 6208
SHA256sum: 3b86f7b9c73a872e3941f567eb2a1c38ce5abf130a29dcb7c9f7d22682906544
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 17919
SHA256sum: ee5c59496514178733fa0ce9dd95f14cfef90171b3bef4f449d1e13cede89e79
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 2792
SHA256sum: f15cfee84f67f1f76b867db61d978add2ae66cc458cc36c3951e478952f78040
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 1954
SHA256sum: f4ab4bab11f666d08e1861712c89e6043c35a225693c083684b39564302807ae
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20250102, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 430080
Filename: olsrd_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 153769
SHA256sum: f95344273f8e3f693555c8013ab7a6cc1c76de9ec18d06d69a34b964aa4213c3
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20250120, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 563200
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_powerpc_8548.ipk
Size: 216861
SHA256sum: 6dcdbf1375db830fbea01296d9e2110d6f61b39cbeef9afd07e6f9186247e6cd
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20250120, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 552960
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_powerpc_8548.ipk
Size: 210810
SHA256sum: 5dab2df59ae96b7379cda04d4b5a5249ce609329ba3155854b2c5c09194fd867
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_powerpc_8548.ipk
Size: 2302
SHA256sum: e1e01bd973ef20018402eb54403775b2ee0d54f40a75613b00acc9b5185f0d5a
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20250120, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 829440
Filename: oonf-olsrd2_2022.08.25~1cec9b21_powerpc_8548.ipk
Size: 314038
SHA256sum: dd986d114947d2bf6f3cba169383e0b0199a37b6642af080e704a5d7d560945f
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: powerpc_8548
Installed-Size: 696320
Filename: opennds_10.3.0-r1_powerpc_8548.ipk
Size: 166933
SHA256sum: b795ebab0cf3d5855fdcc2bcfcf4c76ac52e14afd9375af06309dd718dbf0242
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: powerpc_8548
Installed-Size: 286720
Filename: pimbd_2018.06.19~dbf4e591-r4_powerpc_8548.ipk
Size: 90424
SHA256sum: e01c7f63c0e9769909d8798bdc6c2fe4e6290b67e4505b71bc2eb7e360cd7aa0
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: powerpc_8548
Installed-Size: 204800
Filename: prince_0.4-r3_powerpc_8548.ipk
Size: 45809
SHA256sum: 468bb1b354421f3bea7da223936b13c96d92594ac55996a3b81ede6bc2eb1d73
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc_8548
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_powerpc_8548.ipk
Size: 13340
SHA256sum: 05b34bdcec52e29360c09a61d8eb54f99acbc3389aa048cf4e6556722d4a910a
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: powerpc_8548
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_powerpc_8548.ipk
Size: 11229
SHA256sum: a30a3df34dd79ca88373a41140586346c8b6f12a475bf8c6bb61556ae15f0347
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.