Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mips64_octeonplus.ipk
Size: 25623
SHA256sum: f770e3604f16bffe8511f4857a4585fb615ff2af53f724b9ec406b9e9dbe1fae
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 153600
Filename: alfred_2024.3-r1_mips64_octeonplus.ipk
Size: 29469
SHA256sum: ded2e16875058babec3e0c78d6939fcfc5a870dc17193d393da7b65d5f193ce3
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mips64_octeonplus.ipk
Size: 4995
SHA256sum: cea90936f859f0bb652e478e3e53cee8ed7546d386da76d51a47d22cc40a830f
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20250102, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mips64_octeonplus
Installed-Size: 225280
Filename: babeld_1.13.1-r2_mips64_octeonplus.ipk
Size: 74057
SHA256sum: 5ee0976d73798e9ee8bff6b38d2589855e8a04f21b04b41b802aebf5f8cb393c
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: batctl-default_2024.3-r1_mips64_octeonplus.ipk
Size: 45648
SHA256sum: 98dcb45f4669aa9ce934b839c755b41c8c83e68dff0dae7c1d3e1aa21a0faee1
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: batctl-full_2024.3-r1_mips64_octeonplus.ipk
Size: 52736
SHA256sum: ee5c003a84a7417549297a4b619dbc8981a92bbec41b690fcfd62e4d8513fcbf
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: batctl-tiny_2024.3-r1_mips64_octeonplus.ipk
Size: 15861
SHA256sum: 864c6068027f0a53572cf446941297426e33fe7d0fbad0c4eb75fe4b4e2b355d
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: batmand_1440-r1_mips64_octeonplus.ipk
Size: 43916
SHA256sum: b458c8b386eae9149d51c80c652e7f2fc8f5696cc834d9e19c03bab93dcc4881
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.16-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_octeonplus
Installed-Size: 1351680
Filename: bird2_2.16-r1_mips64_octeonplus.ipk
Size: 456563
SHA256sum: faee48869a30eb61f39baf3969e446c0f2eacafe8dce855c5698591974f56839
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.16-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bird2c_2.16-r1_mips64_octeonplus.ipk
Size: 11959
SHA256sum: e0c0e878acba7575466cdc59bc953aedf644a75efaacbd2de5760b1fffb075ea
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.16-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bird2cl_2.16-r1_mips64_octeonplus.ipk
Size: 11005
SHA256sum: 58af891c11e5460d3e839f8e1084df56fe295fef5280b82c8bb018b0d4720766
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_mips64_octeonplus.ipk
Size: 4687
SHA256sum: 0d69e97ed438b5bef72e416a6ae14706726ba87d6151a974899ee1d8aa0cd1a2
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_mips64_octeonplus.ipk
Size: 8411
SHA256sum: 775026f70fa4f6237b7c3a2464e4ba3e3d787792250563baeb4dff1be4525dba
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_mips64_octeonplus.ipk
Size: 6221
SHA256sum: 86ea75b281f1dd0bc5e387cd54ab241b221b7baea49b20185002680edaabe792
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bmx7-table_r2024061001-r1_mips64_octeonplus.ipk
Size: 10189
SHA256sum: e7ddf53a5ecc545fb70b4a711459857ae6a807734712030940ea4864d7248540
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_mips64_octeonplus.ipk
Size: 5621
SHA256sum: 7d5e16466a923d92c7810e6b4926b7180c3b2aabca2c503c2b3a3aa791c20b5e
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bmx7-tun_r2024061001-r1_mips64_octeonplus.ipk
Size: 25677
SHA256sum: 056bccce6494306527fdc38e3f8ae12462bca3d954bcc97cdedb687d109ca806
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_mips64_octeonplus.ipk
Size: 8945
SHA256sum: f1818ab5c60b424965b104f6474b9070edc320badaceeb3a88e6c7f250a7a8d6
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 440320
Filename: bmx7_r2024061001-r1_mips64_octeonplus.ipk
Size: 165028
SHA256sum: 4d54f620267193dab7fdd41121bfeaf36b9a9eeb70668a27fc9accbceadca098
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_octeonplus
Installed-Size: 839680
Filename: cjdns-tests_21.1-r6_mips64_octeonplus.ipk
Size: 328190
SHA256sum: 8a1c8e6b5411b515e639922e174ed28c7f68f6914edc0289021e034abc76fb04
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_octeonplus
Installed-Size: 1003520
Filename: cjdns_21.1-r6_mips64_octeonplus.ipk
Size: 384479
SHA256sum: be709b2257ec29ca638746b9825bc67f349046f6dc57a2ccf32e4589466abf4c
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 1424
SHA256sum: 597731e5d2ac5255ecd1f511d6e0a216beba5a5189fc77b23611cf2d77418901
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 959
SHA256sum: 0060393eb341bf0584235858a32d0b43567e13efef59cf69fad1f6da9d46a964
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 943
SHA256sum: 1bcb2a7accec0445058113be62ce60e6fb51c075df118918c27ce30aa91ac7a3
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 307200
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 108062
SHA256sum: 735b81e03aa354df2155baeaa30584feed6590c7eadd86d094b5cd6cba60251a
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 307200
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 119462
SHA256sum: 267448e9e7e632326ae408133c63e680680d2a177afea70a42baad3de58a4f48
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_octeonplus
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mips64_octeonplus.ipk
Size: 6586
SHA256sum: 9f83c92e767bac4d46e1386c8b4f65bb63ded604fa9e47e3573ed0e2f43d36c1
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mips64_octeonplus
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 57619
SHA256sum: ca912ba7c258294d9c6800f42f8cf005f62c4da3da039e5e76dc7b5f702aa16c
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7785
SHA256sum: 16b03637b1e3915684ff4e26874360134921cd712d761bdeb1bbda8d0babb7e2
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25668
SHA256sum: 6b20ff99ae696c0bf2bfb653e552ab5273878fa733d6205894466ae5e1536150
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mips64_octeonplus.ipk
Size: 8326
SHA256sum: 9a38013da52fe94071aa31744566a2e9ad4111b15d9450dbcceff0673c388524
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2851
SHA256sum: d5f0d90fa526db14cb5c78265a2062aa2746281b982052a3c111a33ad2b33201
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_mips64_octeonplus.ipk
Size: 41369
SHA256sum: a5cc311cb86a8859349c714cc6e39bc0eaea3bd92548319d10e43fa4ce541998
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mips64_octeonplus
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_mips64_octeonplus.ipk
Size: 50577
SHA256sum: 8d0b33b2786a0e06ade8c26edf8a9d6a8e19115a960a35e93144571da9d26e4d
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mips64_octeonplus.ipk
Size: 13053
SHA256sum: 41a568964e557907a977bf6e8b4543aeaeed7bf5bd3d0409ffb40cb7b057cc9d
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 2804
SHA256sum: 7898d46441b20f88397a36e7062bbb6898989519a9bddb352e84c1d3b6564a6a
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 12745
SHA256sum: 2c196d4c2c4b5a0c2a246fa58fddf999d057bf171a17e05d1f760f16be1bd942
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 4510
SHA256sum: b198e19e7f7dc34001d2221fe20001949378d8576cac2cf33d6ba41d2c2934fb
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 3124
SHA256sum: 670da379ffc0b377645f228346a00b792417e4e972e650b6564945ce1a4a1c94
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 4956
SHA256sum: 22ab60ce75b6e8d94a30c26ed684c42f47d05dc23748de61d05584cf907b89e7
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 3367
SHA256sum: 9e07933031f312d4900c6cff4127f18bc338e60f1e33a38bfa9ffebeeded4878
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 31215
SHA256sum: 2a5b9f024dca10b8becad978429d5f8e3833e346670cf3f54d65a16418cec4f0
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 21634
SHA256sum: bad4f9816e32297dde8f92117d974760badd56868b6bde032b56aa3aa45828f5
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 9551
SHA256sum: 75a410118e874c44fe610fa92bad0713d79548d3e7b71bb55384c50c68578d99
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 11740
SHA256sum: 163212d7292984e93e9d7a8a80d9df33a56f5e42197754a886d41faec4174f24
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 13257
SHA256sum: 90ebf6dae2ed72155ec169db6bbd82f71a01c5dab19dc9ec38aeb32b5a51b1bb
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 9226
SHA256sum: be28614692443d3fdd2fed18be94e6f003c1dd64a5b00236b3fbce651067fa45
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 3663
SHA256sum: 75ec6ab109a6b464e299237bdae69d3d388b26b5bc7cf8e6a5ac48c774008375
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 256000
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 57591
SHA256sum: e548f7f53137a2d7133e0343f2718e5989b16ab24d23980094642a7d444c610d
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 6995
SHA256sum: 93fe55bbde1b5ae1d7fa752a9200ceaf6f3602ae0c9ef5748e6d71d0fb055518
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 10940
SHA256sum: 79529f2d20de3ad5b8df1c5ba43ea1c5263a8c99ec667e02cf78d3e7a98f979b
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 5207
SHA256sum: c2eafd0ac74442eb6a9b92090e277a8f3bd16991e4aa9cb380c55b1e7c507568
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 15123
SHA256sum: 7582324ece66ec7ec760c7f88f22471d53e7a1d4b79a0601c9c02dc9462505d5
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 2461
SHA256sum: dc59123b684fb93be741a6a48c871bdfc0e5088e913c840c1cb5118a119f8ca1
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 1954
SHA256sum: 5c15bf3e8e8dcb080bbcbdf7362c0f75747b83448659967418ce0327b2a18d41
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20250102, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 378880
Filename: olsrd_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 134180
SHA256sum: 1b96fbf9d09294f0ae01a06fc548df788272ebae9f3f0bb622d63811d4f38436
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 512000
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mips64_octeonplus.ipk
Size: 168899
SHA256sum: 7b5f41054b02b0a161f4bc3bcc31c8ad29aa1182328508ebd75e957e44d5cfc5
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 512000
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mips64_octeonplus.ipk
Size: 164410
SHA256sum: 6733db02e2e400f2356cd9bfd38611d31fcd2c8e2f6b150526fd0673ea137279
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mips64_octeonplus.ipk
Size: 2303
SHA256sum: df10077073b11ec9daf267564c5a3f34173025a26db3b8713015aa90b529cda2
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 727040
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mips64_octeonplus.ipk
Size: 244536
SHA256sum: 334bad819830c4eec88abe06236be14bd3737c7d56fa8f00848ed499996663e0
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mips64_octeonplus
Installed-Size: 706560
Filename: opennds_10.3.0-r1_mips64_octeonplus.ipk
Size: 163851
SHA256sum: 80a44415a66431bb5f5d830b2c3f49fc6a79d89bded006271ac1a2e2446e7fe3
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mips64_octeonplus
Installed-Size: 286720
Filename: pimbd_2018.06.19~dbf4e591-r4_mips64_octeonplus.ipk
Size: 88550
SHA256sum: 9f2642380a82e2b937c85ca08b03bcca92fcb8ec892f788a3f07dc603ee5e4a1
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mips64_octeonplus
Installed-Size: 215040
Filename: prince_0.4-r3_mips64_octeonplus.ipk
Size: 34992
SHA256sum: d874ade26c40c8f123725b4e42f9e3c76397e527fbac538099c62800563bed27
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mips64_octeonplus.ipk
Size: 12803
SHA256sum: 8b1fd62d65db0fefc2642d14a5de86d51ffac53c40672baee0a9820885843ea7
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mips64_octeonplus.ipk
Size: 10757
SHA256sum: 28e1f8420f7d785eba9500629266b39a91fd8bce35fbace7513f7989a8c6f90e
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.