Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: riscv64_riscv64
Installed-Size: 61440
Filename: ahcpd_0.53-r3_riscv64_riscv64.ipk
Size: 24983
SHA256sum: 336e127cb62422be53861b136f851a5811dc27bfc493ae4677e60ca1d7d89a77
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 71680
Filename: alfred_2024.3-r1_riscv64_riscv64.ipk
Size: 29798
SHA256sum: f98f25467036452ad202eac40638b6e8ccf8bbcb074ed6650d3ec2dca9fad01e
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_riscv64_riscv64.ipk
Size: 4991
SHA256sum: 48bd6ca6d9c1cfaa806f88778a4e9c1397eee403d1232e0c38a177718ff1b90f
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20250102, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: riscv64_riscv64
Installed-Size: 143360
Filename: babeld_1.13.1-r2_riscv64_riscv64.ipk
Size: 73219
SHA256sum: 6e734e214a9a23078cc5fd5a1e2970d123b9e6c570e3b8b26541f5048f019ceb
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 112640
Filename: batctl-default_2024.3-r1_riscv64_riscv64.ipk
Size: 48500
SHA256sum: cd9e2262f8bcfd34aba0a9acce053239057612fe5335fc069e58fc11a705375a
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 122880
Filename: batctl-full_2024.3-r1_riscv64_riscv64.ipk
Size: 54957
SHA256sum: 49356594063777ebb5f473fb93b16b7bccf97167101efccc1179a28c3e02ae4a
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 51200
Filename: batctl-tiny_2024.3-r1_riscv64_riscv64.ipk
Size: 17270
SHA256sum: 2a82223b106be249c09750a32b5c766f94e37d1f0706e2a5b4382d44357b3ad0
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 102400
Filename: batmand_1440-r1_riscv64_riscv64.ipk
Size: 45548
SHA256sum: 01fcfd9035347d6f211c7e11e35127938d4be688946740b45102d88152fc2eef
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.16.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 1054720
Filename: bird2_2.16.1-r1_riscv64_riscv64.ipk
Size: 443915
SHA256sum: ae20dbeaf2efeea591bba0c422171fd5edcb832ac997f8dc5e1abe179fc0b3a7
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.16.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: bird2c_2.16.1-r1_riscv64_riscv64.ipk
Size: 12007
SHA256sum: 5358546dcb2f0257f67fa86fd047c1211c792d7de029c005c6fe12029061a92e
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.16.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bird2cl_2.16.1-r1_riscv64_riscv64.ipk
Size: 10876
SHA256sum: ba99e4b4373d9fcdb1366174c3cf44d011bef9859a5d9da529e75aeab76d7820
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bird3
Version: 3.0.1-r1
Depends: libc, libpthread, libatomic1
Conflicts: bird2
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 1198080
Filename: bird3_3.0.1-r1_riscv64_riscv64.ipk
Size: 529572
SHA256sum: 7590e2ff9b349bca86e9b202cfe06e60e6af3c654c43408d64155c949791c3ab
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 3.0 branch of Bird which is a multithreaded rewrite.

Package: bird3c
Version: 3.0.1-r1
Depends: libc, bird3, libreadline8, libncurses6
Conflicts: bird2
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: bird3c_3.0.1-r1_riscv64_riscv64.ipk
Size: 12107
SHA256sum: 779e4fbe1bec6d04193e7ef616d731b6503847d2559d5c7bd159fb66c2fcba63
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird3cl
Version: 3.0.1-r1
Depends: libc, bird3
Conflicts: bird2
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bird3cl_3.0.1-r1_riscv64_riscv64.ipk
Size: 10968
SHA256sum: b8fe557d622747c01c3947aec2ceba4c6ab4629b0eba7b90782d5d2d87ab37b4
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-iwinfo_r2024061001-r1_riscv64_riscv64.ipk
Size: 4803
SHA256sum: b79bf97734ee1676772fdd91632e5867ad7f71f37a9277280bf10f17d8eec630
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-json_r2024061001-r1_riscv64_riscv64.ipk
Size: 8745
SHA256sum: ea98ec6331a5808f47482b66a2047bef65d7b2454c8e1b5f538b8f295a233470
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-sms_r2024061001-r1_riscv64_riscv64.ipk
Size: 6467
SHA256sum: 4af7b2ef2a7ac3fe8ea32459a1c2abea6df92f1f5aea21ac5181dbb05c10adb7
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bmx7-table_r2024061001-r1_riscv64_riscv64.ipk
Size: 10486
SHA256sum: c49b8a21527df4183c928971ccf9b301e30d5cf52277fde3abc4338bc7cd50bc
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: bmx7-topology_r2024061001-r1_riscv64_riscv64.ipk
Size: 5800
SHA256sum: ea8c4aa0a73a6e6abb1d8da647799949a60e18aa712d41a944561a51a7519fa6
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 71680
Filename: bmx7-tun_r2024061001-r1_riscv64_riscv64.ipk
Size: 26640
SHA256sum: 571eeb6d5609e25f483e455c9fbfb35136380656c6ac2431cd848d5b3ade5436
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20250120
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: bmx7-uci-config_r2024061001-r1_riscv64_riscv64.ipk
Size: 9148
SHA256sum: d27536ccfba6f8390007f4c993fbe0d494d2a95e4fb8fb5986b018dda61b55dd
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: riscv64_riscv64
Installed-Size: 337920
Filename: bmx7_r2024061001-r1_riscv64_riscv64.ipk
Size: 172132
SHA256sum: f5b430751e53d86ae062007d9dde219681f93f3fea4db38dfda0ef84c3499799
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 1412
SHA256sum: 51985eba48c5da928d63fa91cd44cea9507a491c828b6bc0e81864a7fafe3952
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 949
SHA256sum: 20e5c79770ed90566210054e2f3082be28ea1cee407bf4ae940603e354f038b6
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 937
SHA256sum: 0c65991cee8443a7b446d9a73ca242a890d82a640dbbf4a61f523f7957df944f
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 215040
Filename: hnetd-nossl_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 106515
SHA256sum: d3e56ddf1975ad4d1ac94cedc7ebf727c08db606904d0c944f3abf2cfe2bd030
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: riscv64_riscv64
Installed-Size: 245760
Filename: hnetd-openssl_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 117194
SHA256sum: 2cbd2f38130bf0e95f07e3726315f71254852dc41a395d83ac99f0e79bdc08a7
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_riscv64_riscv64.ipk
Size: 6581
SHA256sum: 6e76bdb8e273f3289fd9dbb99d24052428a8d6347f2d10264374465a2113297e
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: riscv64_riscv64
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_riscv64_riscv64.ipk
Size: 57616
SHA256sum: 8126daba1c7ee616bfa65d07d2951d5dc6b45edbec0f5dc137b4be801eb547a4
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: 038dca35183f285e872b997bd692c8fca4558224fa623e94cb1799e6a42da66e
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: d29b28ece48700f93fea07ff9e20003b87081806597ad8b648f072ead063d94f
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_riscv64_riscv64.ipk
Size: 8196
SHA256sum: 58ccb97583d749d5ec57f96e8eac23ddfa46c2626a0e604e176f21a5fb48d0b8
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2850
SHA256sum: fd5677d800533c60e7151c97acf8b0dc71059920665d225b19248a860e87fa3c
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: riscv64_riscv64
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_riscv64_riscv64.ipk
Size: 34856
SHA256sum: deb272719c8c209b33ca0180475b0031c22d07c4dcf406340972b10d4a4abc0c
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: riscv64_riscv64
Installed-Size: 133120
Filename: nodogsplash_5.0.2-r1_riscv64_riscv64.ipk
Size: 51436
SHA256sum: 3a46ebbd6a6c35447aa8c7344849e9b71ecc35d1583404ef8ce0216ede2abea3
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_riscv64_riscv64.ipk
Size: 13336
SHA256sum: 8303b81a9560876ffb1bc09fda091a9db34652b0508ca09e7937aaf84c1ffac1
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 2917
SHA256sum: d537c19ef271c6353f757a28ab3e668183d185257de94ad80f28584168b78cfb
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 13914
SHA256sum: b6fa7f840bb510157acd21e08ee2f3877ca96456e1ca2bbddeb6695d27e141d2
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 4826
SHA256sum: 7ccf0f9db17dce51a8f27e661196540732e5b87d11e1e4ef259731d5dac34c28
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 3338
SHA256sum: 79c906b2900150cb64265aa7dcbd722046acd51882a15b0f378b056414160e11
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 5201
SHA256sum: 6af8dce1fa2bd4825daa2a9a0eabc3511ee69d1ea1c3a82a3efe20f56223ecbb
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 3518
SHA256sum: f938e8d10fca577d712e4a62e8826d7a1428c1e912e43f7eaadc406f9f8922b1
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 32716
SHA256sum: b13bda03fcbdf60fe08d569faf28db61c630bc2838637309df373c65f9f86d4b
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 24229
SHA256sum: b575fcf0fe6eb46a7975b112ce0edaa34660d638426b87523d146037f546fbff
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 10648
SHA256sum: 2116e1f60fd8f1c83b2aaa961c5a59b216d7dadb50b3bfc889d8057a978cebd0
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 12685
SHA256sum: d1d604f6e6c9c3d1aae61d7d8f0b872107935e9d51afb7ce2c074984b2f72d05
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 14428
SHA256sum: aeb998a32f0858f65d2cc321e99e61009b1f9de76ad95e15dec3268611774505
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 10272
SHA256sum: fd22ead414d9f22f1225f721faafae841788fe4cadcf0d4e51f3018015f01f7a
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 3859
SHA256sum: 86d7bc8d728ffe6419d855c3b0d1b374e3ceead1886664f46a78390d8eb2791a
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 174080
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 63221
SHA256sum: 80a3e1e91b78fcdfa9a05e43c4e11156937443c9c08696458f4578d8f7b582a1
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 7610
SHA256sum: 17f84f5f2ab00bcf951b19b3a7d6440273bb2cf60de8fa314bb61c5896709aeb
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 12658
SHA256sum: a65553dfe7952eef032d93822561bd6d3797d6ee601203b232e5eb756695a10a
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 5314
SHA256sum: 4b44086e3d587ec9f73aa14a3a0c3a2e573a0a68688a3768b87306edb0444fb3
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 16002
SHA256sum: c0c874714c070b792769b97c6edf7ee00fb2961775d990a5fb00eb1047067574
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 20480
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 2531
SHA256sum: ed8504b34697bde6af81dc4068f7b9f263a90a8f0942917d4cfcf396ba8976ba
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 1950
SHA256sum: 6e656674f11be24fe90301af5411a668c637efcf085d47fbe6448d4dbbdb402f
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20250102, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 307200
Filename: olsrd_2024.06.09~d72be9ad-r1_riscv64_riscv64.ipk
Size: 144419
SHA256sum: 0f007eb9fbb4a53d83a5b4cee9aa719f22a19ca9db9d634ab00ca0098bd28d49
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20250120, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 389120
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_riscv64_riscv64.ipk
Size: 180805
SHA256sum: c60e9024d97ab9a8aa44a0747ece543e70c5189bb2e96b5ea64f41874100e00c
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20250120, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 378880
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_riscv64_riscv64.ipk
Size: 176461
SHA256sum: bb13178418f7346b69f486d505d68bbf235e92595d9f377332725547889d9302
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_riscv64_riscv64.ipk
Size: 2303
SHA256sum: a6030b8f959254ac189a9c3f8a447cb1eb1a7521c8f33eee7f37e46dc1080deb
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20250120, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: riscv64_riscv64
Installed-Size: 552960
Filename: oonf-olsrd2_2022.08.25~1cec9b21_riscv64_riscv64.ipk
Size: 258529
SHA256sum: a1053f419337926fe7f9ceacbf2e11f6ee64e45a9f21c159bef6e5c0f2ada703
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: riscv64_riscv64
Installed-Size: 563200
Filename: opennds_10.3.0-r1_riscv64_riscv64.ipk
Size: 165060
SHA256sum: 19bd772770ce9837bbb21038e0f478a4f62d6c4fd28c4311472340fc650f417b
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: riscv64_riscv64
Installed-Size: 204800
Filename: pimbd_2018.06.19~dbf4e591-r4_riscv64_riscv64.ipk
Size: 88773
SHA256sum: 798f29f59010a3c4ca4812ace2f3039f1661d121754efb75a80e78b3e1aae080
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: riscv64_riscv64
Installed-Size: 92160
Filename: prince_0.4-r3_riscv64_riscv64.ipk
Size: 31706
SHA256sum: 67463e6b761dc2588f7e839bb6597cc00a914fd6b2334538d548567f8a5b91cc
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: vis_2013.04.07~7710cce4-r9_riscv64_riscv64.ipk
Size: 12393
SHA256sum: 6a531b616e9dbd5b96892884c2799c6ffb78980368c093558deec96693706dcf
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: riscv64_riscv64
Installed-Size: 30720
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_riscv64_riscv64.ipk
Size: 11088
SHA256sum: b7361cf6535874880acd17fa6fe805639e86c525a90df3511eab818f76de0259
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.