Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mips_mips32
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mips_mips32.ipk
Size: 23373
SHA256sum: 0475c26ef7fbd60f81e758cc3c580d8afaf1d0eb77f36238905d5afacdf0b3a6
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: alfred_2024.3-r1_mips_mips32.ipk
Size: 27664
SHA256sum: 13efb340910f4c2fe39a757c92aa0904c727c8325aa6673d443dff204378d7b8
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mips_mips32
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mips_mips32.ipk
Size: 4637
SHA256sum: bb0a2f8ca200bee5ae6a3fa6641caf22753ca5c5ed592937fea4f4cb6dff0ed2
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20250102, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mips_mips32
Installed-Size: 153600
Filename: babeld_1.13.1-r2_mips_mips32.ipk
Size: 63816
SHA256sum: 1efc95f5e189a0399543e833e205a8dd19ffd459b4ec6f8b19854b84325b7fa9
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: batctl-default_2024.3-r1_mips_mips32.ipk
Size: 42463
SHA256sum: 90a672e280dd59d75c0f91dbe29c9b3a8ee250e96598296f12976f923a1dbb7a
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: batctl-full_2024.3-r1_mips_mips32.ipk
Size: 50027
SHA256sum: bee287267907b29bd2d9234a0be2e08d65ff31dfc88d8279c4a4b1a37dd96b6a
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: batctl-tiny_2024.3-r1_mips_mips32.ipk
Size: 14492
SHA256sum: 0fa87289734a9750496a39f3f3b7b7ee16e2528b9f7c3fa1549875f9b7a205e0
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: batmand_1440-r1_mips_mips32.ipk
Size: 39867
SHA256sum: 74b3e0d4472c51148639e4907b231cb5e4565c372d553f921b72d5f28be3f925
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.16.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips_mips32
Installed-Size: 1136640
Filename: bird2_2.16.1-r1_mips_mips32.ipk
Size: 418503
SHA256sum: 307ddd190ed5b61a278ab2c4ef7d646726c0cce5aef2a48a1aebd07e3cf1d55f
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.16.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips_mips32
Installed-Size: 71680
Filename: bird2c_2.16.1-r1_mips_mips32.ipk
Size: 10955
SHA256sum: 3a839f210bf4a8a825e0452e231842add4ae2210b73dfbdc7553f910a81a2635
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.16.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips_mips32
Installed-Size: 71680
Filename: bird2cl_2.16.1-r1_mips_mips32.ipk
Size: 9995
SHA256sum: 031bcc440c9eaa58894cac8898f904bb98bf99248bdb8c650388aebf99d05e72
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bird3
Version: 3.0.1-r1
Depends: libc, libpthread, libatomic1
Conflicts: bird2
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips_mips32
Installed-Size: 1351680
Filename: bird3_3.0.1-r1_mips_mips32.ipk
Size: 504961
SHA256sum: 80eeb625c65cbfb12c29b787a35802f7ae893896c59b3204466567912c6cc2ae
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 3.0 branch of Bird which is a multithreaded rewrite.

Package: bird3c
Version: 3.0.1-r1
Depends: libc, bird3, libreadline8, libncurses6
Conflicts: bird2
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips_mips32
Installed-Size: 71680
Filename: bird3c_3.0.1-r1_mips_mips32.ipk
Size: 11069
SHA256sum: e4f5cb1f6f384f5a37c2cc8a0dbc224f8ccc9dab77e4443e91075e8e07072cab
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird3cl
Version: 3.0.1-r1
Depends: libc, bird3
Conflicts: bird2
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips_mips32
Installed-Size: 71680
Filename: bird3cl_3.0.1-r1_mips_mips32.ipk
Size: 10109
SHA256sum: 6c30f81926d82fb7c1a188e983e4620136fa4481b38cb6b03edda7f9f7b9de6c
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_mips_mips32.ipk
Size: 4677
SHA256sum: f1c0d24c1bfd09d98e8db36c9f60c1aec1540f83114afb2f689f6ecd7a520298
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_mips_mips32.ipk
Size: 8628
SHA256sum: 44344d928b4bdc70003bf2b1d6f878e01b3cdf193f2bfe7be78b320da98321fd
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_mips_mips32.ipk
Size: 6133
SHA256sum: bdb493874646019de7bef9c0df4e00f6f21e6111cfb23d32dd8aa5215bea2de9
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-table_r2024061001-r1_mips_mips32.ipk
Size: 10140
SHA256sum: b3b3fc8c4e3773b54b270fe3f107c9fb216e8fb6d6e6b712a2b68f734b62c579
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_mips_mips32.ipk
Size: 5670
SHA256sum: 6e294a2a3f88c2e3529ff0cd68c6585ab2b45f2b505b41c9df3bc91ca137e931
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 81920
Filename: bmx7-tun_r2024061001-r1_mips_mips32.ipk
Size: 25876
SHA256sum: a49f8da7cda1fc5529d90e4426eaa79b1ea05513c90a4ddd4902ec2a2ca822da
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20250120
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_mips_mips32.ipk
Size: 8813
SHA256sum: f6dc1636a9baa7acc14264a685788b9f3f34918b0a2ea87caa64998b8ae22e2a
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 419840
Filename: bmx7_r2024061001-r1_mips_mips32.ipk
Size: 176540
SHA256sum: 2c33864684096b6850ae3d223421f7a693011639c4428902f2b5331a9018e2b5
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 1414
SHA256sum: eb43c6ff11bb6c1a07132d5fd64ee40ef489ea3030065a0344e7cf1bdd80bbf5
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 949
SHA256sum: 568cb95fb790325c723e72a82d6292719f2ae63bd3c8815373ba0d8b00c33477
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 934
SHA256sum: e8f7a8f6613456ed4e04fa147c8a9eac824217ceae1af12cf1d753b0e70c49cf
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 235520
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 95702
SHA256sum: acd1e5eb2aef1062bdb22d3b37246a5a97b72233131fbfb910da34686b39dcb2
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 296960
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 106028
SHA256sum: 963aa31f8954c43d84d390cbb86bf82f26298f4c6b14a15f9e9e4f8f0e013145
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mips_mips32
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mips_mips32.ipk
Size: 6582
SHA256sum: 87ace6f4d36b996a2e181c19221bc721b8591016f94d84d4d2897bba894a8b06
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mips_mips32
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 57616
SHA256sum: f703b12fafe3ce2859f6ef8adee02abe1fc054959c8860d1dcb12afa7f99be4e
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: 038dca35183f285e872b997bd692c8fca4558224fa623e94cb1799e6a42da66e
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: d29b28ece48700f93fea07ff9e20003b87081806597ad8b648f072ead063d94f
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mips_mips32
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mips_mips32.ipk
Size: 7566
SHA256sum: c4e9f7565efca016513dea902bf7bc5bbb06c750be498ed6ab8c7da041eeffc7
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2850
SHA256sum: fd5677d800533c60e7151c97acf8b0dc71059920665d225b19248a860e87fa3c
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mips_mips32
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_mips_mips32.ipk
Size: 32020
SHA256sum: da4a3957b8483c682d35f585e4dcac34323340edd50a2fb5d4c0ff879fb31334
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mips_mips32
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_mips_mips32.ipk
Size: 46119
SHA256sum: df62bd876bb681af8a6c1582278fb2f9617a5613493437ea525ccd479573a490
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips_mips32
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mips_mips32.ipk
Size: 11815
SHA256sum: aa6bd403bfef5b365173a4c1b6e9bd61b10f4aebc8f8dff1ecfc158776531dc4
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 2714
SHA256sum: 1364a67e5042d5300fe4bd987fbf1190bb390d9fdc7e571f9830cc5e996029bf
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 12782
SHA256sum: e775e09d0ed772b4717349edc4c5cb5c95ed3aa1d97cfdc21bcb988c61434ea1
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 4433
SHA256sum: 88d40500097b42ff61926d8f5d390c3c1b5cbe9ebc8de298b7f7bccfd89b47de
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 3058
SHA256sum: 2fe2e890b2e5169c572da620566a65f19986a56db24ddc07ac329ec1d97796dd
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 4833
SHA256sum: c1e28a46dc534b8263943f52563951c558c687eb84dc405acfc47296fb226140
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 3222
SHA256sum: 46ec20df3bcab0a2e63e17d2486d00bbb7d91c2a2a8fa8c16285a315eb2006c7
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 31770
SHA256sum: e88f7de9bbcd6551aaf64004a345e58d3fe4e4efc162e6fc922a7e0299f226ca
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 23721
SHA256sum: e5c3e953715bcce58d6b6bd1bfadc7e69883593c9bcef7ab5e37d8a4163d3ffd
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 9489
SHA256sum: f64a3d27f7a716d0db0613f2b86ede044298eb1126a4a6835b152c959e01bb45
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 11984
SHA256sum: fb2e8829fbc85557e7dbbbabe8545a06cfeff124f06e7fe2af32a59d9b85ad90
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 13797
SHA256sum: cde3ba7e2b0209214975753a3388be9bff0b415c047b13cffcda2415d40aecad
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 9221
SHA256sum: 5f0a152c08e189ac831a533ce2d32e3ad78844ecd4421617918cdfb7733a75d6
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 3601
SHA256sum: 8534e44ceea4257d49b017b2e016c1c43cf26752e52647189903142a6dc45e92
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 256000
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 63010
SHA256sum: 7bcb3f534e22315884edf470ac2ff2382ae23f5e571bffe4f25c67f2c4680926
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 6957
SHA256sum: 7b0c4f02b525674d6dffc7e7a85af7b83becf80736a947b888548bb7c8d2fe24
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 10993
SHA256sum: a7664b62ecde60e6a856d6be0c9522c348680d3318eb2887e7f2454b16a48e81
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 5193
SHA256sum: 53d02e730b845d5e6ca7650071a9faee20cc50ea2326baa76edbad254ec1a757
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 15551
SHA256sum: 0938aeea86845091c48b32597be7da953e316144fe6dcbf3250ec673bf52e9b3
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 2398
SHA256sum: 297e9a441ce969267b469face06c383dc41e7dce463b7209536e0165edd057ab
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 1949
SHA256sum: 2890e13fe2b58af3a001a25fa7cca9c31113344db1e85477c4fc1ab3da6d6983
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20250102, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 368640
Filename: olsrd_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 139296
SHA256sum: b01ce1ea368692133f50830c4206a3a70f9f9cabf037cf8923a7ac6686f432dd
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20250120, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 430080
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mips_mips32.ipk
Size: 159751
SHA256sum: 3d73d144475f330f7e0c35d591df6a04cd891bef7a5ece374ed39c225ff0d848
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20250120, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 430080
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mips_mips32.ipk
Size: 156078
SHA256sum: 31f7a5c9b62f381669f5627b99c547c5bbed598beba7b756c7abecf7df674a07
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mips_mips32.ipk
Size: 2299
SHA256sum: dcf47de0cc1a56ddf8ad09f417b195dcfd302cbb99ab38304e37f8d8401e931a
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20250120, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 634880
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mips_mips32.ipk
Size: 232539
SHA256sum: e58f691490c98e86c360b895f38f71d0fd67e7f92e64edb8ae16fa419863ae83
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mips_mips32
Installed-Size: 634880
Filename: opennds_10.3.0-r1_mips_mips32.ipk
Size: 159211
SHA256sum: faac92bac66eff9cb628c95e40425e4af1b828077cceb1384a4cfd93a218b097
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mips_mips32
Installed-Size: 225280
Filename: pimbd_2018.06.19~dbf4e591-r4_mips_mips32.ipk
Size: 79150
SHA256sum: 37ccd2e30e577c633a9b6abedb9e72f24c66998d06b693fbcc36a881f30c35d7
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mips_mips32
Installed-Size: 215040
Filename: prince_0.4-r3_mips_mips32.ipk
Size: 33809
SHA256sum: e8895a74e2f6fb947a208226cbc3f5fd1b19947a42f19bca7fb732640c2798f2
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mips_mips32.ipk
Size: 11149
SHA256sum: 1ab652bea2f53a6cae3cfbf958ecbaef387848d09fb8ccb3a9233a5ea29efdb1
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips_mips32
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mips_mips32.ipk
Size: 9482
SHA256sum: fa5009f009d6ac6bf87f4129f9f9e27da8aab478f6b7f60d57ec5f5607d74463
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.