Package: ahcpd Version: 0.53-r3 Depends: libc, ip, librt License: MIT Section: net URL: https://www.irif.fr/~jch/software/ahcp/ Architecture: mips_4kec Installed-Size: 81920 Filename: ahcpd_0.53-r3_mips_4kec.ipk Size: 20172 SHA256sum: a15056f8ed4873c231466ab110c447a41b35a94863b805f0f8fb72ce0087c2b2 Description: Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. Package: alfred Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt License: GPL-2.0-only MIT Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 143360 Filename: alfred_2024.1-r1_mips_4kec.ipk Size: 24645 SHA256sum: c73ff5d88ca61baa3933be40b4115bac9b3adc5247fae8f2f76c932307c9b070 Description: alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. Package: babel-pinger Version: 0.1-r1 Depends: libc, librt Section: net URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/ Architecture: mips_4kec Installed-Size: 71680 Filename: babel-pinger_0.1-r1_mips_4kec.ipk Size: 4240 SHA256sum: cbc77155c975c2fa772b7881ca8b5a4e989d7a61270a915ff55219c5e476fa82 Description: Babel-pinger is a hack to export a default route into Babel for people using DHCP to configure their routers rather than speaking to their upstream provider with a proper routing protocol. Package: babeld Version: 1.13.1-r1 Depends: libc, libubus20231128, libubox20240329 License: MIT Section: net URL: https://www.irif.fr/~jch/software/babel/ Architecture: mips_4kec Installed-Size: 153600 Filename: babeld_1.13.1-r1_mips_4kec.ipk Size: 55108 SHA256sum: 8267ba054a5ea53507571047ba4619d9609d1f4f8fa76a61c5ececa8d68ba169 Description: Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is an IETF standard protocol (RFC 8966). Package: batctl-default Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 143360 Filename: batctl-default_2024.1-r1_mips_4kec.ipk Size: 38197 SHA256sum: f9fc51c4949c82ffadb13522141492b6fcbee2ba97c17a0b4a885f5fe3e9fe23 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.1 of the user space utility. Standard subcommands for configuration and online debugging are enabled. Package: batctl-full Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 143360 Filename: batctl-full_2024.1-r1_mips_4kec.ipk Size: 44580 SHA256sum: 81a75a814e54f275f464dcb1ef87b8f48799fc97fe3c13b1db9183b7e4e1495b Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.1 of the user space utility. Subcommands for configuration, online and offline debugging are enabled. Package: batctl-tiny Version: 2024.1-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: batctl-tiny_2024.1-r1_mips_4kec.ipk Size: 12891 SHA256sum: 507c7851f020df87fc4752592c245e3f9bdc8e523c7f2ce11e1377c585b8305e Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.1 of the user space utility. Only configuration relevant subcommands are enabled. Package: batmand Version: 1440-r1 Depends: libc, libpthread, kmod-tun License: GPL-2.0 Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 143360 Filename: batmand_1440-r1_mips_4kec.ipk Size: 35944 SHA256sum: 759d92fd264756d3432f2b9d892146639c25aa91ecc6148919bae68c48b2bef4 Description: B.A.T.M.A.N. layer 3 routing daemon Package: bird2 Version: 2.15.1-r1 Depends: libc, libpthread Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: mips_4kec Installed-Size: 870400 Filename: bird2_2.15.1-r1_mips_4kec.ipk Size: 353442 SHA256sum: 72e0b106c501b767d50f2d8064e8360237a61ceb94ef5af02427c2c02002d3cc Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and OSPFv3, RIPng, Babel and BGP protocols for IPv6. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6 into a single branch, and also adds support for the Babel routing protocol. Package: bird2c Version: 2.15.1-r1 Depends: libc, bird2, libreadline8, libncurses6 Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: mips_4kec Installed-Size: 71680 Filename: bird2c_2.15.1-r1_mips_4kec.ipk Size: 9782 SHA256sum: 16f98ee788ad75b30f7d6df64ee5017307bcf05778a676fccbf71ac93b272ccc Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. Package: bird2cl Version: 2.15.1-r1 Depends: libc, bird2 Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: mips_4kec Installed-Size: 71680 Filename: bird2cl_2.15.1-r1_mips_4kec.ipk Size: 8579 SHA256sum: d5898a71246472548f7020e89c28ecae6f42c3b75041cc547fb061ee650b4489 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Package: bmx7-iwinfo Version: r2024051906-r1 Depends: libc, bmx7, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 71680 Filename: bmx7-iwinfo_r2024051906-r1_mips_4kec.ipk Size: 4638 SHA256sum: 4cd697aa7386af17a96dcdde88a1112a2566e582151c6c4d8003d44e99115a29 Description: link characteristics plugin via libiwinfo (recommended!) Package: bmx7-json Version: r2024051906-r1 Depends: libc, bmx7, libjson-c5 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 71680 Filename: bmx7-json_r2024051906-r1_mips_4kec.ipk Size: 8076 SHA256sum: d2d22ecb78a3c2fc533584c2b5325bc8ee08dabd89282c39099d3df174688fde Description: json plugin based on json-c Package: bmx7-sms Version: r2024051906-r1 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 71680 Filename: bmx7-sms_r2024051906-r1_mips_4kec.ipk Size: 5921 SHA256sum: 1d7e46d5fc0755640283b0567fb8891d730916400005c1f7ef17e3b0cd8f7d94 Description: sms plugin Package: bmx7-table Version: r2024051906-r1 Depends: libc, bmx7, bmx7-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 71680 Filename: bmx7-table_r2024051906-r1_mips_4kec.ipk Size: 9546 SHA256sum: 77e35a6afd5d2ef5fd7d163b66761b519524670cd122d2122d3c7d2d8fd95e83 Description: plugin to announce routes from tables via tunnels Package: bmx7-topology Version: r2024051906-r1 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 71680 Filename: bmx7-topology_r2024051906-r1_mips_4kec.ipk Size: 5616 SHA256sum: d904a32ebcc02d7363c7d40f957e8e2819121a96348077b548821332685be69e Description: topology plugin Package: bmx7-tun Version: r2024051906-r1 Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 81920 Filename: bmx7-tun_r2024051906-r1_mips_4kec.ipk Size: 24681 SHA256sum: 3899a6b8f9bb73d4ab1cba368da5e8889c1535ed3f4620f494a92745455ccb69 Description: ipip-based tunnel plugin (recommended!) Package: bmx7-uci-config Version: r2024051906-r1 Depends: libc, bmx7, libuci20130104 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 81920 Filename: bmx7-uci-config_r2024051906-r1_mips_4kec.ipk Size: 8342 SHA256sum: 7fe789f3ba0560d282b3b28e6179c9a7f81f2e290c370b63cd9bd3b408f7e18e Description: configuration plugin based on uci (recommended!) Package: bmx7 Version: r2024051906-r1 Depends: libc, zlib, libmbedtls21, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 358400 Filename: bmx7_r2024051906-r1_mips_4kec.ipk Size: 156514 SHA256sum: bedc8a43368a2ff54ef23bd52e777ec1ad1f732549516e785d67e3c14f4d09ef Description: BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing Package: cjdns-tests Version: 21.1-r6 Depends: libc, libpthread, librt License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: mips_4kec Installed-Size: 696320 Filename: cjdns-tests_21.1-r6_mips_4kec.ipk Size: 333076 SHA256sum: 046dc14a4ec8b25f534732b1338ac6fa7bfdcc2e085507927bf872ea152abbc1 Description: cjdns test cases Package: cjdns Version: 21.1-r6 Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2 License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: mips_4kec Installed-Size: 931840 Filename: cjdns_21.1-r6_mips_4kec.ipk Size: 400450 SHA256sum: ca7bd538f9ae5aab1df3a4523c271ca46fcecd1c4ed73d36eb967a7232ff8e22 Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: hnet-full-l2tp Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: mips_4kec Installed-Size: 10240 Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 1421 SHA256sum: 23d4a06e33bb24f146062ec752742a0df74df7f82c6562be98fc35c033f7c8e6 Description: HNCP Homenet metapackage (w/ L2TP) Package: hnet-full-secure Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: mips_4kec Installed-Size: 10240 Filename: hnet-full-secure_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 950 SHA256sum: 3eaf9d62cb6137d8fb2fc0ba457cbfd29789f38c5cd5c87c1ca8046beddb2c49 Description: HNCP Homenet metapackage (w/ SSL) Package: hnet-full Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: mips_4kec Installed-Size: 10240 Filename: hnet-full_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 943 SHA256sum: 917bf3005dfe8b0d9e13fe8197a0520af6aee596cb441494b9fbdc5297bd5b42 Description: HNCP Homenet metapackage Package: hnetd-nossl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: mips_4kec Installed-Size: 163840 Filename: hnetd-nossl_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 83652 SHA256sum: 2c87eed6b547ddbb19a2c67526ce915b9f50b25a938841c48a120de927dd321a Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: hnetd-openssl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: mips_4kec Installed-Size: 235520 Filename: hnetd-openssl_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 92204 SHA256sum: 29119c3629179804ccc83b295acfcd29c21f03c841544359baabf892342ec069 Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: luci-app-cjdns Version: 1.3-r9 Depends: libc, cjdns, luci-compat, luci-base License: GPL-3.0-or-later Section: luci URL: https://github.com/cjdelisle/cjdns Architecture: mips_4kec Installed-Size: 40960 Filename: luci-app-cjdns_1.3-r9_mips_4kec.ipk Size: 6581 SHA256sum: fdef7e36bfa5c65704097cb732e6507b0f3fb75f3a3b381f7d5ecbcef1752fe0 Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: luci-app-hnet Version: 2018.12.21~c4376661-r1 Depends: libc License: GPL-2.0-only Section: luci Architecture: mips_4kec Installed-Size: 235520 Filename: luci-app-hnet_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 57616 SHA256sum: 7d088b95d66b488fb1345be1eb0ec301c6229a234ae834141011d25eeb7b5212 Description: HNCP Homenet configuration and visualization Package: luci-app-olsrd2 Version: 0.2.6-r16 Depends: oonf-olsrd2, luci-mod-admin-full, libc Section: luci Architecture: all Installed-Size: 61440 Filename: luci-app-olsrd2_0.2.6-r16_all.ipk Size: 7782 SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d Description: OLSR2 configuration and status module Package: mcproxy Version: 2017.08.24~93b5ace4-r9 Depends: libc, libpthread, libstdcpp6 License: GPL-2.0-or-later Section: net URL: https://mcproxy.realmv6.org Architecture: mips_4kec Installed-Size: 348160 Filename: mcproxy_2017.08.24~93b5ace4-r9_mips_4kec.ipk Size: 107230 SHA256sum: 1efc268a5fb7abe9d60a4f7eb5e8b69fbfa939e1d3ad5dc91154d04f074713b2 Description: mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see RFC 4605) for Linux systems. It operates on the kernel tables for multicast routing and allows for multiple instantiations, as well as dynamically changing downstream interfaces. Package: mesh11sd Version: 4.0.1-r1 Depends: libc License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/mesh11sd Architecture: all Installed-Size: 112640 Filename: mesh11sd_4.0.1-r1_all.ipk Size: 23609 SHA256sum: 4da79739dac9b989905617214b1af12873d08c7bdfeda9b3fe13cc40cf1d6a3d Description: Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks. It was originally designed to leverage 802.11s mesh networking at Captive Portal venues. This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes. It allows all mesh parameters supported by the wireless driver to be set in the uci config file. Settings take effect immediately without having to restart the wireless network. Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted. Default settings give rapid and reliable layer 2 mesh convergence. Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set. Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes. The mesh11sd daemon can dynamically check configured parameters and set them as required. In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled, and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh. Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier. This version does not require a Captive Portal to be running. Package: minimalist-pcproxy Version: 2014.12.12~2d6d1b0b-r7 Depends: libc, libubox20240329 License: BSD-3-Clause Section: net URL: https://github.com/fingon/minimalist-pcproxy Architecture: mips_4kec Installed-Size: 71680 Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mips_4kec.ipk Size: 6576 SHA256sum: 3c3a4b3ca52e159080ff1f4635289314842eb4cdd06760886e895bea66861318 Description: This package contains a daemon which can be used to forward PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers. In and of itself, it is not very useful, but combined with hnetd+miniupnpd it allows for control of NAT forwarding and firewall pinholes from multiple hops away. Package: naywatch Version: 1-r7 Depends: libc, owipcalc License: GPL-2.0-only Section: utils Architecture: all Installed-Size: 20480 Filename: naywatch_1-r7_all.ipk Size: 2855 SHA256sum: c983f75c20c9f1d035e44855edbc5a3525863be968070571ddb12a9541f3e13c Description: Reboots or triggers watchdog if no link-local neighbor is available. Important: Be careful when you do a sysupgrade. Stop naywatch first, and make sure procd took control again of the watchdog. You can do this using 'ubus call system watchdog'. Status should be "running". Package: ndppd Version: 0.2.5-r2 Depends: libc, libstdcpp6 License: GPL-3.0-or-later Section: net URL: http://www.priv.nu/projects/ndppd/ Architecture: mips_4kec Installed-Size: 81920 Filename: ndppd_0.2.5-r2_mips_4kec.ipk Size: 27948 SHA256sum: 12a053d26fb0d76323e47eff639f9e3ed057aff1d0ad0c0e7b64ec9a7d9e5a02 Description: ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. Package: nodogsplash Version: 5.0.2-r1 Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra License: GPL-2.0-or-later Section: net URL: https://github.com/nodogsplash/nodogsplash Architecture: mips_4kec Installed-Size: 174080 Filename: nodogsplash_5.0.2-r1_mips_4kec.ipk Size: 43269 SHA256sum: d737c30c2831322f0103b821c834ae99f9c903afdb05590f9498f631d2de965b Description: Nodogsplash is a Captive Portal that offers a simple way to provide restricted access to the Internet by showing a splash page to the user before Internet access is granted. Package: ohybridproxy Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240329, mdnsd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: mips_4kec Installed-Size: 81920 Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mips_4kec.ipk Size: 10015 SHA256sum: f6b9d73db0b60640533a2c8ac43de097994e4c64f79266cdbc29c48f95e26f11 Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again. Package: olsrd-mod-arprefresh Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 2726 SHA256sum: afed1ab1f3abe5b3657766b3560c845edf6e0b97751108af4e67f095b6cc7bbc Description: Kernel ARP cache refresh plugin Package: olsrd-mod-bmf Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd, kmod-tun License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 11674 SHA256sum: 17ccaebc90646b2da9b60ca594d68ca88469127d73edabd7a60dda36de9a0e4a Description: Basic multicast forwarding plugin Package: olsrd-mod-dot-draw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 4339 SHA256sum: a6c89ce35f88a5b96d3f29da90e3061f65f15979dd9f5aaaca44b86f685ef94d Description: Dot topology information plugin Package: olsrd-mod-dyn-gw-plain Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 2918 SHA256sum: 082784ff0a867dfe961869c2a000ade338679c05980f037dbc881dae76e5b1de Description: Dynamic internet gateway plain plugin Package: olsrd-mod-dyn-gw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 4474 SHA256sum: 7769721477b654bb6df713a92a4da36d99fb2f420535f99f999d9f9ae3808139 Description: Dynamic internet gateway plugin Package: olsrd-mod-filtergw Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 3169 SHA256sum: 7e38e98272071eebabb59cc6aeed4e12b8ac2937a82cf2409262ce39fc3fba93 Description: Filter Gateway plugin Package: olsrd-mod-httpinfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 143360 Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 31210 SHA256sum: 392bd492533d4cb409ad0efc2d3242747fc54c3b947a23279ee1b9004c56ee41 Description: Small informative web server plugin Package: olsrd-mod-jsoninfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 21378 SHA256sum: 2e287ab769c1ebcba3c1dabcdbdbfb8424206113875924b620e78a02e240a285 Description: Small informative plugin with JSON output Package: olsrd-mod-mdns Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 9007 SHA256sum: 4e07fe262c09f639a26c8c7c293c5ac123130f9767f2b5fa069e3f11184e9c37 Description: MDNS/Zeroconf/Bonjour packet distribution Package: olsrd-mod-nameservice Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 10863 SHA256sum: 83afc5b69a41f4e12adefa73d412a2735e7e14ce38102c0d292014763cc64d36 Description: Lightweight hostname resolver plugin Package: olsrd-mod-netjson Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 12482 SHA256sum: 1b7ffc7c0e18ffb76082361015814c0e39fec321dc1bc18455e68f2993b680e5 Description: netjson plugin with JSON output Package: olsrd-mod-p2pd Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 8565 SHA256sum: 24aecb779f666eecb77ac3cbf6a637eb401d392424cb1859f53bc25099fdc22c Description: Peer to Peer Discovery plugin Package: olsrd-mod-pgraph Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 3516 SHA256sum: 347ffa19807df551c4fa2cc95cb96c07a8dfb0c21eb9ade58e63843e938e98bf Description: output network topology for pgraph Package: olsrd-mod-pud Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd, libgps30 License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 153600 Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 59400 SHA256sum: 338d645202cf97b346645653014ab7f39c3679edee51a27f981d9645697bc3cc Description: Position Update Distribution plugin Package: olsrd-mod-quagga Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 6619 SHA256sum: 1402c02b19e19923179616734a728873f36e452a8597ca87bf64496242cd02c6 Description: Quagga plugin Package: olsrd-mod-secure Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 10597 SHA256sum: aa73c6c00b8d95850454abfdb4847a6c236e4c27e512fbdb6bff175dea9a477e Description: Message signing plugin to secure routing domain Package: olsrd-mod-sgwdynspeed Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 4975 SHA256sum: b657c3b268a275427a65f681e02e4ded385897017e6d16542b6d3337524c5dde Description: Smart Gateway dynamic speed plugin Package: olsrd-mod-txtinfo Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 13773 SHA256sum: e94974b8d544b743ced0ef9780323603542a5bc41c8f053a42559d9b7e1cb1c6 Description: Small informative web server plugin Package: olsrd-mod-watchdog Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 81920 Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 2428 SHA256sum: f9fc927c215a30a1553f2c599b75b3026c3083b7e6a39c26019683a43ba22f47 Description: Watchdog plugin Package: olsrd-utils Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 10240 Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 1951 SHA256sum: e0c00350d18986e1991723110c9744bdec93732a912b9506e4b3c55514ac58cf Description: Utils for OLSRD Package: olsrd Version: 2023.06.12~a9b3f1ac-r1 Depends: libc, libpthread, libubus20231128, iptables, ip6tables License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 307200 Filename: olsrd_2023.06.12~a9b3f1ac-r1_mips_4kec.ipk Size: 127071 SHA256sum: be0d606cf4782fa3c7d2b0559ae1678afc3b716b31be7f3d911d51b8b9c6cf66 Description: OLSR (Optimized Link State Routing) daemon Package: oonf-dlep-proxy Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 296960 Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mips_4kec.ipk Size: 136609 SHA256sum: db315ccc4e563935568eacfdb152975529cc395fa5d1f02e86111eec331bd8a9 Description: Build DLEP Radio+Router Agent Package: oonf-dlep-radio Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 296960 Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mips_4kec.ipk Size: 133338 SHA256sum: 64e311b22133c960f43f5b25994b86b2b690f1e4dc124962d0997a095a2e03e2 Description: Build DLEP Radio Agent Package: oonf-init-scripts Version: 0.9.1-r3 Depends: libc Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 10240 Filename: oonf-init-scripts_0.9.1-r3_mips_4kec.ipk Size: 2294 SHA256sum: bfb40b529c9c8f35943adc99daf1b3e2653cd5f2e07af740046970df652e7596 Description: Common OONF startup scripts Package: oonf-olsrd2 Version: 2022.08.25~1cec9b21 Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 440320 Filename: oonf-olsrd2_2022.08.25~1cec9b21_mips_4kec.ipk Size: 198570 SHA256sum: a735d45e76313e536fb10f525820e214b91421b6bf73830ada8faaefa00bda27 Description: Build Olsrd V2 Routing Agent Package: opennds Version: 10.3.0-r1 Depends: libc, libmicrohttpd-no-ssl Conflicts: nodogsplash License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/opennds Architecture: mips_4kec Installed-Size: 634880 Filename: opennds_10.3.0-r1_mips_4kec.ipk Size: 156227 SHA256sum: 101e292ceca8bd60cf32d8a06b02967f20b84a5d1ccfff653d71b0de58e3aecc Description: openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal. It provides a border control gateway between a public local area network and the Internet. It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points. Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported. This version uses nftables. Package: pimbd Version: 2018.06.19~dbf4e591-r4 Depends: libc, netifd License: Apache-2.0 Section: net URL: https://github.com/Oryon/pimbd.git Architecture: mips_4kec Installed-Size: 153600 Filename: pimbd_2018.06.19~dbf4e591-r4_mips_4kec.ipk Size: 72110 SHA256sum: 1f87869f722a45ba3274766d102e89562bbecda8087b0d3313e471427054c341 Description: This package provides a daemon which implements the Protocol Independent Multicast BIDIR routing protocol. Note that a routing protocol must be installed and running in order for PIM to function. Package: prince Version: 0.4-r3 Depends: libc, libjson-c5, libpthread License: MIT Section: net URL: https://github.com/AdvancedNetworkingSystems/prince Architecture: mips_4kec Installed-Size: 215040 Filename: prince_0.4-r3_mips_4kec.ipk Size: 33811 SHA256sum: 41388c03a39bdb5a165e76d24c12667d2142b5b897e83f1566ad4120a4625b2d Description: Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. Package: vis Version: 2013.04.07~7710cce4-r9 Depends: libc, libpthread License: GPL-2.0-only Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 81920 Filename: vis_2013.04.07~7710cce4-r9_mips_4kec.ipk Size: 9755 SHA256sum: e97728e450e4aeb8ba06229cc7b8690357e64e7d13a62d80121b89bc8c81c696 Description: visualization server for B.A.T.M.A.N. layer 3 Package: zonestitcher Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240329 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: mips_4kec Installed-Size: 71680 Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mips_4kec.ipk Size: 7827 SHA256sum: 7c53a7ef46987a4f4d1a93b472b0439ebaafee79ca51adde3f95ee7dde9cf43b Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again.