Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mipsel_74kc.ipk
Size: 20361
SHA256sum: e0faba281235a3286833801fc1d9a3f752c0bcb272c7237042000081914024f4
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 143360
Filename: alfred_2024.1-r1_mipsel_74kc.ipk
Size: 24766
SHA256sum: 991dcac384f1d8a8955dabfa46d7c6f2a30accd36ee42d80e15d58e85ba5044a
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mipsel_74kc.ipk
Size: 4263
SHA256sum: f41ad523ebf2c80c7eb6161438eff9d1f211239fd4c5eca444f960ffd307f97d
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r1
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mipsel_74kc
Installed-Size: 153600
Filename: babeld_1.13.1-r1_mipsel_74kc.ipk
Size: 55324
SHA256sum: afd1fe5cbab1334ad852a5b508b5e0463aff9886adf143d560e2eec09a03c18b
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 143360
Filename: batctl-default_2024.1-r1_mipsel_74kc.ipk
Size: 38054
SHA256sum: 22695b909867db947a7e852873774686c6214fdbe63b30bb7da0e357c57ae765
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 143360
Filename: batctl-full_2024.1-r1_mipsel_74kc.ipk
Size: 44496
SHA256sum: 53853d3d0029751835867acb37173fa528e69b87af267fb426866eb7412beb8c
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: batctl-tiny_2024.1-r1_mipsel_74kc.ipk
Size: 12925
SHA256sum: a1b679b0f790d6f41e983c0dcbf4a91841b8dfcbc3d8bf43614ddbcbe1dfa586
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 143360
Filename: batmand_1440-r1_mipsel_74kc.ipk
Size: 35864
SHA256sum: 0dd88e9d59eaa42357bdd893ff0a5e17cddfd98e94539e18f373f8fa2fc80ada
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_74kc
Installed-Size: 870400
Filename: bird2_2.15.1-r1_mipsel_74kc.ipk
Size: 354877
SHA256sum: e7b4bf29530003c18d517b00a521d4fbbc57f195aab25fcf066810643891c9f7
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bird2c_2.15.1-r1_mipsel_74kc.ipk
Size: 9791
SHA256sum: a710cfd0b6183106f56e3413daaa59aa3025bf1334fd021cde35c1d5e415923d
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bird2cl_2.15.1-r1_mipsel_74kc.ipk
Size: 8589
SHA256sum: c3d742463ba195a13f570f8fe228648bcf7af458bf4fc48db0dea9a1aa008e3d
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024051906-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024051906-r1_mipsel_74kc.ipk
Size: 4661
SHA256sum: 42be9fc7cd19b81d44f8b502a46f1b19824d998dab68bf7d08d3f5774fe73258
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024051906-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bmx7-json_r2024051906-r1_mipsel_74kc.ipk
Size: 8042
SHA256sum: 6a5716cf64638294c2689c03fcb8fb3ebc833d45aedccdab3695c4c3a1f9dadd
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bmx7-sms_r2024051906-r1_mipsel_74kc.ipk
Size: 5909
SHA256sum: 5f3d8aaf215eea330c06460f8bc2d0155c2e8240d5ba09aef720b932d3566dd1
Description:  sms plugin

Package: bmx7-table
Version: r2024051906-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bmx7-table_r2024051906-r1_mipsel_74kc.ipk
Size: 9573
SHA256sum: 34ebf7f637e172c05ccc2652156af951582fd3071c87f5b28ffc10d4316c6386
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: bmx7-topology_r2024051906-r1_mipsel_74kc.ipk
Size: 5625
SHA256sum: db2f7cf80bf6f5d04e66fd5d7b023d8e02c4f660a940e0c24b1f0c0732150b4e
Description:  topology plugin

Package: bmx7-tun
Version: r2024051906-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: bmx7-tun_r2024051906-r1_mipsel_74kc.ipk
Size: 24748
SHA256sum: d353e2ad49156376265f7e4c96403b20419ecdf7484d465cdbcceccfcaa5b140
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024051906-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: bmx7-uci-config_r2024051906-r1_mipsel_74kc.ipk
Size: 8295
SHA256sum: 316ba83e1e2a5cf37d08ed7478ef47f98ab5fa2263c30820875d3101cb0abb2f
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024051906-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_74kc
Installed-Size: 358400
Filename: bmx7_r2024051906-r1_mipsel_74kc.ipk
Size: 157143
SHA256sum: dad95f8859a3c20597ec4d0a2c6787915fc81edf2751d60e3ab5b0310017eb38
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_74kc
Installed-Size: 696320
Filename: cjdns-tests_21.1-r6_mipsel_74kc.ipk
Size: 333834
SHA256sum: 181f8943f500fa73996f90014ed0df1b6528a299d45dac8c889c659c47e9aecd
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_74kc
Installed-Size: 931840
Filename: cjdns_21.1-r6_mipsel_74kc.ipk
Size: 402231
SHA256sum: 8bd8fc19ff4cc601e2997e70d38c038dc2d2ebeca26e00c20b6da5a5dfd84c8e
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_74kc
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 1421
SHA256sum: 9ce99d90cd1704637c44ba46a5e00832cc1bf27f348f9e17f61126d43415d5cb
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_74kc
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 952
SHA256sum: 727687ee84ebf5234b24c563f9022fb8b2cbe2056fdd01c2a1b41841e9ab464e
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_74kc
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 943
SHA256sum: f903f10110aaf0c6c38e4df6575f30a2eb3f9d8d639d47b7644e44a97aebd242
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_74kc
Installed-Size: 163840
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 85115
SHA256sum: 641599b07ea2afc39fbe0c8878421ef4fe90bec26bde837ad58b69fbc9ec3dd0
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_74kc
Installed-Size: 235520
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 93633
SHA256sum: fa687aefdfb05753e8ce94bbc491382c8517a6e35128a3c006148b2abef19804
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_74kc
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mipsel_74kc.ipk
Size: 6583
SHA256sum: 1e6a8da72b9e58074788d2726a6951cd2a6a99928c88b16e97e0e0e983520b53
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mipsel_74kc
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mipsel_74kc.ipk
Size: 57619
SHA256sum: 54504da1872fd9ded925bc4e1996753d3c5b43811ad73254dd082bfe5461fd2e
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017.08.24~93b5ace4-r9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
URL: https://mcproxy.realmv6.org
Architecture: mipsel_74kc
Installed-Size: 348160
Filename: mcproxy_2017.08.24~93b5ace4-r9_mipsel_74kc.ipk
Size: 104869
SHA256sum: 9176012c4b644097389f4c550ac5e5fd0c444fdf46fa13e5ac3e1a89df665e58
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 3.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 92160
Filename: mesh11sd_3.1.1-r1_all.ipk
Size: 19073
SHA256sum: fe28941a7a4ccc33938ce420f23cd2b4ef7fe61f4f509337737179fbf28c4663
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mipsel_74kc.ipk
Size: 6636
SHA256sum: 40b563e003f66e2a9e30d5881d8047cd0cbe8ee455b6848de322c98406915b97
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2853
SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_mipsel_74kc.ipk
Size: 27789
SHA256sum: 92a5d5059b9280ee9941215ac17eaeadaad453d63cb546a7867bbc3746eaa973
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mipsel_74kc
Installed-Size: 174080
Filename: nodogsplash_5.0.2-r1_mipsel_74kc.ipk
Size: 43222
SHA256sum: de06a03b83f1d513ebe4105df88af147119bbae32661594e282c9e0b47134b5f
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mipsel_74kc.ipk
Size: 10195
SHA256sum: 0d434d39a576864833fbc3c64c5ff8af76d020e52e64a294530fe2916f529ec6
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 2747
SHA256sum: c77f8312f7d02e9b1e8432cc242803e8d6a15559558b2754abc8520890c2a5ed
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 11745
SHA256sum: cf674b86af09286a864106a151e9b7128e88647fbcca28a068198960384ecf4b
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 4364
SHA256sum: 60f41844858aa5bfe3bc59b729fc36248324c47535433a00b74ad26cc117fe0b
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 2933
SHA256sum: bcf514215fd6541e293c97569e8efbf6e0508f1197f03dc951e6494034de8207
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 4450
SHA256sum: f4cd012038f07410ad6ec2fc6e1d8f521f1df2fe619c3f0b3dca5d5aa8e95036
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 3170
SHA256sum: 2a61440d4208d2bd91b6fc8f5d2d46b605ea899844959ee86773a366f06445a5
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 31118
SHA256sum: 3c739ad05014eeee75a239020719c1ac54a354057ae649e5ad029cc7615db6b5
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 21553
SHA256sum: 14dd78b033445aa7dacd4570d1b71172f32fd5235e851b7f090664cf306c1a2b
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 9048
SHA256sum: 49f3993a104e541075eb4d0ec2b6568122fc5b16186bdcca075f167bda8697bf
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 10847
SHA256sum: 25b9145078e01e8333e5dfd7047814b6d80d8b119dbd07003e401d857077ecc6
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 12629
SHA256sum: 5bea6e4e413a05177f54807809112c6914d745239248627807b26372df1b2b6d
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 8580
SHA256sum: 263c0cb1918cb5f114f921785fe2b8ddc41ed064c36dd8290520a410ab8f0a8c
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 3529
SHA256sum: f0a2c873a64399cbf8bb01fdd49f1ec0c34382d9b81ce6564af186490f7f9c54
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 153600
Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 59108
SHA256sum: bc7b73ba843e04ecc6689398d3c1465c406f358874f9b7be19096f9557aa8505
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 6573
SHA256sum: 8475a08ebac3e63f6533e260ff5f42397f80810d488d11df51a6083d166a0249
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 10628
SHA256sum: 70ceff794908ffdfb5b2c8b6696049e0bffaf08f0f6bd34d50ac988109b3e1f7
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 4994
SHA256sum: 4a3729f5fd0d6ddb3be6496ae5a7782a55f08db7d897857d9699404d69087361
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 13908
SHA256sum: cf7700d1c126b7556c6e3707a013074ff74ccbac83516679eebb427731f0f13e
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 2449
SHA256sum: db915f53df661f939321f7cd2fa68d972e6198ef5ea587259ffb63d0437b8863
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 10240
Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 1956
SHA256sum: 49051c6d0de28ffd06c7143b78c2a37cc2498f5d7ff1ca8c75318b8e58fae391
Description:  Utils for OLSRD

Package: olsrd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 307200
Filename: olsrd_2023.06.12~a9b3f1ac-r1_mipsel_74kc.ipk
Size: 127938
SHA256sum: d627122b72ba51bd14862e0c83ec895dfe0ff414b68d6afc15f314edb618ac73
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 296960
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mipsel_74kc.ipk
Size: 137543
SHA256sum: f0e73076e3f95ee1be26d5cd913c4b9ee7555f8a8d569194825ca14256057123
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 296960
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mipsel_74kc.ipk
Size: 134202
SHA256sum: 105950430dfec059d873e6fcc6c6475e361e95321c31b12f249316151c925b27
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mipsel_74kc.ipk
Size: 2301
SHA256sum: b0a494429acab6f83197e9a10bd4a050c1867a3d6a2df1f8373f72ee6fcc8d38
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_74kc
Installed-Size: 440320
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mipsel_74kc.ipk
Size: 198649
SHA256sum: 1eea13d0b83a2c5af08404f84cc33be7dfc947d86c5509a276e70c5ce4ae3978
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mipsel_74kc
Installed-Size: 624640
Filename: opennds_10.2.0-r1_mipsel_74kc.ipk
Size: 154147
SHA256sum: a64c4d0a143a0b138d88cfcf3a312506c3326f32acfb7ca8a8d7bc594439b09a
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mipsel_74kc
Installed-Size: 153600
Filename: pimbd_2018.06.19~dbf4e591-r4_mipsel_74kc.ipk
Size: 72877
SHA256sum: 1f0a6621e40d2f75e9e0f5d074d73a4f8eb72890409a5b0db192c11112d9b642
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mipsel_74kc
Installed-Size: 215040
Filename: prince_0.4-r3_mipsel_74kc.ipk
Size: 34183
SHA256sum: 4ef362b6353ec95df3ca09533038b31ef660621e688e37eba36675acd9f62d70
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_74kc
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mipsel_74kc.ipk
Size: 9826
SHA256sum: f8a7455c8be4fd36c825319cb60e9f0e4b81fa02eef8a2ebe2ecbc32908598ec
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mipsel_74kc
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mipsel_74kc.ipk
Size: 8138
SHA256sum: abae3dc2a959a4f90e3c51f062936dab11ed3865dbe444b5c96a56762b1d0506
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.