Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mipsel_mips32.ipk
Size: 23547
SHA256sum: c9799593476b22b1aa14a0b6f0fa5187ee39b2ececb1515df092f3e761c56e17
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: alfred_2024.1-r1_mipsel_mips32.ipk
Size: 27764
SHA256sum: 7751112a5fcf29f0d0100bf42202cd3dd4141d12c8e67e70af2c237f284de9bb
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mipsel_mips32.ipk
Size: 4649
SHA256sum: 9c760313e5457775ec47d38cb15340c02df90a5eace169f5cc62892adfa87a14
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r1
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mipsel_mips32
Installed-Size: 153600
Filename: babeld_1.13.1-r1_mipsel_mips32.ipk
Size: 63970
SHA256sum: fab1e275fdc65ba259d270eaefa5931970a81187df00b053827ab682ded6bd8d
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: batctl-default_2024.1-r1_mipsel_mips32.ipk
Size: 42644
SHA256sum: 4bf272b2ab41da60db0323c60ca671442b941d82717bdb01392f867d5a1d3dc6
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: batctl-full_2024.1-r1_mipsel_mips32.ipk
Size: 50207
SHA256sum: f076aeeff5bc68690853e946e74cc88992f30f86721f2b1be316eebbcbb362a3
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: batctl-tiny_2024.1-r1_mipsel_mips32.ipk
Size: 14523
SHA256sum: 63656db35ddbbe29285362c76c1c1597404ec8e3b308d05e4aaf299cc235fabc
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: batmand_1440-r1_mipsel_mips32.ipk
Size: 40173
SHA256sum: 1a64052ea6b530e7488553b1beab1a826995cbad9d37dc49fe2bd5f2ea72c3a5
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_mips32
Installed-Size: 1075200
Filename: bird2_2.15.1-r1_mipsel_mips32.ipk
Size: 392691
SHA256sum: 565a18890b1a4952bb5f425caad3462ad6b64afafede1fdb5f04c966d34f15b9
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bird2c_2.15.1-r1_mipsel_mips32.ipk
Size: 10519
SHA256sum: 92089258e3364f26698c10dc3c86a601474aefa944629923f52be8e1fc21e3d9
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bird2cl_2.15.1-r1_mipsel_mips32.ipk
Size: 9216
SHA256sum: c881cb4c3db2de8f20a10b8ff23c9deb1188a0c67af62712c2c5ba330a45fbf5
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024051906-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024051906-r1_mipsel_mips32.ipk
Size: 4697
SHA256sum: b45f43e85341dc7a9630ae7b04b0819bbdd1316b988b61c1f1723e7d1214993e
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024051906-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-json_r2024051906-r1_mipsel_mips32.ipk
Size: 8599
SHA256sum: ebdd6545f07f1aa2e2ba2f12976e93ea3776b67b9d84fabe223a221f2074c83b
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-sms_r2024051906-r1_mipsel_mips32.ipk
Size: 6121
SHA256sum: b6e34ba61be718f2957d7f425828c63e5f8ea4cce08bff82bda9d80b5b66a897
Description:  sms plugin

Package: bmx7-table
Version: r2024051906-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-table_r2024051906-r1_mipsel_mips32.ipk
Size: 10138
SHA256sum: 1228341c06b7fcc6f4e7f91eeed34d55e39df7558e0a3e87eb4fc55af2e2f509
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: bmx7-topology_r2024051906-r1_mipsel_mips32.ipk
Size: 5638
SHA256sum: 7ac9a474653a2931cd075e7bcd435393667b67ad7a365e3b0780d7369f221786
Description:  topology plugin

Package: bmx7-tun
Version: r2024051906-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: bmx7-tun_r2024051906-r1_mipsel_mips32.ipk
Size: 25843
SHA256sum: b9f1ae9306ba81e4ced654da027066cec0a5109bf4b469649bdc50216d9a48a8
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024051906-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: bmx7-uci-config_r2024051906-r1_mipsel_mips32.ipk
Size: 8819
SHA256sum: 6d5d4bfce6e81e89374a831809bfccbb4a7bf859a4b93c02024b18359c2ebcf1
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024051906-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mipsel_mips32
Installed-Size: 419840
Filename: bmx7_r2024051906-r1_mipsel_mips32.ipk
Size: 175647
SHA256sum: 0f755d47d44828cd651f593d0614e07c1ec5cff25d1d44c0ed380a4635048351
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_mips32
Installed-Size: 901120
Filename: cjdns-tests_21.1-r6_mipsel_mips32.ipk
Size: 377847
SHA256sum: 888af67d0ec685b07406660413765fc5ec3091498b1e049032e445fba4fa7598
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_mips32
Installed-Size: 1064960
Filename: cjdns_21.1-r6_mipsel_mips32.ipk
Size: 455365
SHA256sum: fa8de06f914cb6305b5e4d55eef2a5b363d99aee8759904e7cdee63eaa514b08
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 1418
SHA256sum: 12608c89c3d0b0fd2939f1bdd3a58d830ba1f2bd08337ece8feed6190f948ee9
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 953
SHA256sum: 01b6df5900d74db7662c81208e669a578fea7f35b64862286ae60fac04a1d173
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 939
SHA256sum: 97ece994c100b27f26149afa39d2c5359ea1a03c052a3061dbb414f18b5a3e58
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 235520
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 96857
SHA256sum: 1e4b9724c49c051ebf7a31104515b2e245cb0c96ccd495695938da51d8f83905
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mipsel_mips32
Installed-Size: 296960
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 106819
SHA256sum: df9488e628514992ef7b8f37eb9954aab34e902269952d040171c895d0ccf9b9
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mipsel_mips32
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mipsel_mips32.ipk
Size: 6584
SHA256sum: c4ca1f398f50a263e1f062a38bf10f4e357c9eb4c0b4dc63fcc14d2503f6ac82
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mipsel_mips32
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mipsel_mips32.ipk
Size: 57615
SHA256sum: 31ba216c47a6ed4debe25bc6e29c039619c20a92db0ef52076556e21e2f01fa9
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017.08.24~93b5ace4-r9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
URL: https://mcproxy.realmv6.org
Architecture: mipsel_mips32
Installed-Size: 419840
Filename: mcproxy_2017.08.24~93b5ace4-r9_mipsel_mips32.ipk
Size: 120244
SHA256sum: 3392ebd85554fcfc67b42766445bf96f051fc76e6c2c536c0cf05771611b119e
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 4.0.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 112640
Filename: mesh11sd_4.0.1-r1_all.ipk
Size: 23609
SHA256sum: 4da79739dac9b989905617214b1af12873d08c7bdfeda9b3fe13cc40cf1d6a3d
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mipsel_mips32.ipk
Size: 7599
SHA256sum: 0837abb8430a99b96d464b7eeadbbd3238196c3527089a2070cfc5d93b188fd7
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2855
SHA256sum: c983f75c20c9f1d035e44855edbc5a3525863be968070571ddb12a9541f3e13c
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_mipsel_mips32.ipk
Size: 31463
SHA256sum: c0b7a3439b15e43eeb5d792df3721ca6b09c2d04c6862c720bba1e2432fe9a9c
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mipsel_mips32
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_mipsel_mips32.ipk
Size: 46210
SHA256sum: 549fcc784dbd1d7679e27f668345a955717e607b7a49aecbf23656d85e9a603a
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mipsel_mips32.ipk
Size: 12011
SHA256sum: f3ab1e53af268ba814918e55981612b422016869df67dbcd421e14407cb9bc75
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 2723
SHA256sum: 1b131e1ce9989f68a45e466e0c52548daac52bfb2bf51720dba43afe2d936bf8
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 12712
SHA256sum: bad8cc6477406c5e9ee363bc54e0813629c1461359ee0e719855a3e7b3271406
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 4459
SHA256sum: 04668149ca06c07265c12ef7db84d6426b34edba69c8cb9b141b9c5f1bde0543
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 3056
SHA256sum: de50c31f911cda7cbdeefd65fb4f83dbd5153e0eb7475c6cc691658d42122a2e
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 4831
SHA256sum: 82b9faf41c5a41dc13b47ed756cc266e7d00c2e3d6926033516757137b0320da
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 3235
SHA256sum: 7558877980e68f21a3cf1ec3a76e9bca06240783a9907456a195eded923ae27a
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 31605
SHA256sum: 8f890c43cefb5344e0c488757b0ae37cbac956461d306200b869f42810fa8ec5
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 23644
SHA256sum: 32d47b99d29d90ec4886e8f935d6a4ae84999de458ec4142292d54ceeece1ce4
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 9540
SHA256sum: 4cc81239f72483b0a1a2b9b58c57d5316db4ce5bec28060699ed3232d30f556f
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 11929
SHA256sum: 0d814d25ba96430e867bc4e672e61297f39e2d7bfef7200c630a0a7eeda92fa4
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 13925
SHA256sum: 0526694b0040955048aa09cfc40e2ee87fad7ce0ab9d032d8b4cdaf01e69737c
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 9182
SHA256sum: b0957eabb7f83269e62501dc77990e1d11dbc561ad4f4dc5337d78870e2a8dd9
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 3585
SHA256sum: 1727463799edd8ab3e02adecd4f2cecbda8ab97ea5cdb4911ade1908cef54b9e
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 256000
Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 62789
SHA256sum: 24ee3d4992deac1c2dc6557ea58fab7d06f52099be8508b1cb818cfefcbc4e79
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 6956
SHA256sum: c7342fc84387d9bdd4a3371fc80589fcb86de9c5f3985c34de21b5d39d4f6cbf
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 11045
SHA256sum: 562e7f77410556016a2d2c7e2fadab96d38820381164a4d5298dbab8cafc8a45
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 5187
SHA256sum: e7d0b73728959c9f8e49bf6f74f6e6796e0f5a1447950fb5cc714c1ab4475925
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 15680
SHA256sum: fadfd139236ea3924a382cc44576c8b8d92956404adafa65773997292f0c0c3a
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 2410
SHA256sum: 21048dfc31969d473349e8226718ff52092d41f9860b086790c7b71389a4fb00
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 1946
SHA256sum: 97c1eddad418401698e056bcafa6c0236d8a770f09c9fba77d8ca7cfae243ea3
Description:  Utils for OLSRD

Package: olsrd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 368640
Filename: olsrd_2023.06.12~a9b3f1ac-r1_mipsel_mips32.ipk
Size: 139050
SHA256sum: 9ce88121578b6ab2b3c268077f426ca8bdba0024f28a89eb0681958f4436e9b4
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 430080
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mipsel_mips32.ipk
Size: 160631
SHA256sum: fd63e477a67b4b094a06611082903a12c0504a9ac95dd7fccceb88a662e512ec
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 430080
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mipsel_mips32.ipk
Size: 156575
SHA256sum: fbecbeaee0031a931ac88dfa578245ab4947ff5771bd9e63dab3da2509db327c
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mipsel_mips32.ipk
Size: 2297
SHA256sum: bf760a849ac33ce013e7fc5d8f5327a8b2b4375708e0081f119e8680fd76dbe0
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mipsel_mips32
Installed-Size: 634880
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mipsel_mips32.ipk
Size: 232669
SHA256sum: 587c5cd97b22f473f178d07e264a71caa0146543aa9731897261c0e3e575d044
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mipsel_mips32
Installed-Size: 634880
Filename: opennds_10.3.0-r1_mipsel_mips32.ipk
Size: 158443
SHA256sum: 50f8c7db46ec34c8d18b6be25aad137164a94bfb1a10c39b7b833e0b18b36353
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mipsel_mips32
Installed-Size: 225280
Filename: pimbd_2018.06.19~dbf4e591-r4_mipsel_mips32.ipk
Size: 79398
SHA256sum: 1976e23d6b197b33011dc1a9a16fad11b2c18d5c35dc66bf2e010e85809b29b9
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mipsel_mips32
Installed-Size: 215040
Filename: prince_0.4-r3_mipsel_mips32.ipk
Size: 34030
SHA256sum: 8cea9f911f6bc4cb78a6c2f710b10f910590166276d62a0bbf51a8ae956dd892
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mipsel_mips32
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mipsel_mips32.ipk
Size: 11140
SHA256sum: bb4787b419f5840c3e3b04c64db2be44a69fe9f58d0d88715c311f493f828520
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mipsel_mips32
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mipsel_mips32.ipk
Size: 9784
SHA256sum: 56cc0dde510b5b522448ba2c23629065bfed48c4335baba75fb369776bc13662
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.