Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: x86_64
Installed-Size: 61440
Filename: ahcpd_0.53-r3_x86_64.ipk
Size: 23278
SHA256sum: b899004ab605d96b1a3ecc110457f02c0d75fc7f5b1092fab17ca6b46e79d274
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 81920
Filename: alfred_2024.1-r1_x86_64.ipk
Size: 27224
SHA256sum: 2dc700c7b205df3c240d8b733b84924712a99b854698b8a5562547dfae0dcaa8
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: x86_64
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_x86_64.ipk
Size: 4592
SHA256sum: 99bff14e5688c2ccfaf5ca88e24747832030c37dd3c2dff5606e7d35e50c7995
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r1
Depends: libc, libubus20231128, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: x86_64
Installed-Size: 143360
Filename: babeld_1.13.1-r1_x86_64.ipk
Size: 68838
SHA256sum: 0e0856df6799efb49c4d1607033f5329a11063402e2a975e469defe586392c5d
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 122880
Filename: batctl-default_2024.1-r1_x86_64.ipk
Size: 47588
SHA256sum: 9eeec4ccf6b304d012abd6bc10e06e4d0b528a7d417418213b767e9741f48db0
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 133120
Filename: batctl-full_2024.1-r1_x86_64.ipk
Size: 54887
SHA256sum: 7a3d9107f7f40a624ed7dfe9707d108767a8008a98e1c974a83492372d571038
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.1-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 51200
Filename: batctl-tiny_2024.1-r1_x86_64.ipk
Size: 16668
SHA256sum: fd99c302d085e237811ca6efc17237792f6da31a95ffe9bd466a968264f6d58b
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.1 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 112640
Filename: batmand_1440-r1_x86_64.ipk
Size: 44817
SHA256sum: 8e13773f694933ba6fce52a85ec9c9743b1aaa560ecf9ac44f25818bd0cf44f4
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: x86_64
Installed-Size: 1024000
Filename: bird2_2.15.1-r1_x86_64.ipk
Size: 395876
SHA256sum: 36f7f6f118dfe0fa8de852186f942cd8fc749b25d5e816437b1097798847822e
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: x86_64
Installed-Size: 40960
Filename: bird2c_2.15.1-r1_x86_64.ipk
Size: 10610
SHA256sum: 17bb880b3763949fdedd7d4240e77588582aa0d273551da9bb4362a43dccabea
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: x86_64
Installed-Size: 30720
Filename: bird2cl_2.15.1-r1_x86_64.ipk
Size: 9233
SHA256sum: a19787f57c346c4054f6f5af7acaebc20bcef91c4f8d032580c9364feb532234
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024051906-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 20480
Filename: bmx7-iwinfo_r2024051906-r1_x86_64.ipk
Size: 4780
SHA256sum: 20aa421cbdc93192b67766f6a938c0062a3f0b39008bc8750a7823ab6f2ee552
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024051906-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 30720
Filename: bmx7-json_r2024051906-r1_x86_64.ipk
Size: 8507
SHA256sum: 90b8e9ff35cabb8962d5b3e2105c29c541118d4a2395fb12ff8f6affb5ecb26f
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 20480
Filename: bmx7-sms_r2024051906-r1_x86_64.ipk
Size: 6028
SHA256sum: 96c52f9ff7bb608a4a9a97b738c2a11166485861da9959e48dabf7e4afc9e87c
Description:  sms plugin

Package: bmx7-table
Version: r2024051906-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 30720
Filename: bmx7-table_r2024051906-r1_x86_64.ipk
Size: 10201
SHA256sum: e92c4430e13997ed832028a4facff38ac9830650e8b7af605ef82fac50cacdc7
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024051906-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 20480
Filename: bmx7-topology_r2024051906-r1_x86_64.ipk
Size: 5524
SHA256sum: 7536ce4e2c8bd2f417e17ab6140c8109089a8b8b8e40e39e8326278f5aae8790
Description:  topology plugin

Package: bmx7-tun
Version: r2024051906-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 71680
Filename: bmx7-tun_r2024051906-r1_x86_64.ipk
Size: 26259
SHA256sum: e79432c77b6b4a848d820fe134ca977a67c467b01214f7fcb2e086410e9aba81
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024051906-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 40960
Filename: bmx7-uci-config_r2024051906-r1_x86_64.ipk
Size: 9284
SHA256sum: 4a9852a76bb270ab41ee29fc3eca3d2b0b9428af962178db0da7f92d7fbc91e2
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024051906-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 358400
Filename: bmx7_r2024051906-r1_x86_64.ipk
Size: 169838
SHA256sum: b0f3dc39d8b46b2cba640160732bd43dbc09c68ae83a822b6bf49feda00e24f9
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: x86_64
Installed-Size: 706560
Filename: cjdns-tests_21.1-r6_x86_64.ipk
Size: 330247
SHA256sum: df7fe82ecda3bbeb216177ef0490574a807eba218c01fae8851959a5ab573241
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: x86_64
Installed-Size: 849920
Filename: cjdns_21.1-r6_x86_64.ipk
Size: 384398
SHA256sum: 1f770d57d22ee80bb44a5de5fb5e910b612a27ff9a9c9490ba0a2ee0fbbbaa96
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_x86_64.ipk
Size: 1417
SHA256sum: 6737bca715e94c9964aeaa042c03df503575a05f486ed09c2526e909ee3fbd1a
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_x86_64.ipk
Size: 950
SHA256sum: 2f1f4e7fe39669de93eb498e01bb8144e0c191ff239175a7d789060361026a26
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_x86_64.ipk
Size: 936
SHA256sum: fe9316ab719b3d4d5a2e9ebcf3e8594505882caefeb5dfa4cfcf72191d020953
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 235520
Filename: hnetd-nossl_2018.12.21~c4376661-r1_x86_64.ipk
Size: 103652
SHA256sum: b73ba20c2a27dca59c3c5ff2045646645b0c1344406c9a046ed61f3ba4accfe8
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 256000
Filename: hnetd-openssl_2018.12.21~c4376661-r1_x86_64.ipk
Size: 114564
SHA256sum: 9d0d3b31036583c6af4e2f7f7d8bc99441a606955c1a2fc58dcf9a0fcc343601
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: x86_64
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_x86_64.ipk
Size: 6584
SHA256sum: d75bb99c6152bf62244386df208ffd8cbe99dbbf1f7337b5c70c2b52b9e4cc73
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: x86_64
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_x86_64.ipk
Size: 57614
SHA256sum: 3f65886031b71c48970f7e656cea93e072ab48cae0c51658dfaabfd5c652279d
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7782
SHA256sum: eec3f8cb8d87ec7efbb158abca04090eb109d30732ffe9a92031c45bbca9089d
Description:  OLSR2 configuration and status module

Package: mcproxy
Version: 2017.08.24~93b5ace4-r9
Depends: libc, libpthread, libstdcpp6
License: GPL-2.0-or-later
Section: net
URL: https://mcproxy.realmv6.org
Architecture: x86_64
Installed-Size: 358400
Filename: mcproxy_2017.08.24~93b5ace4-r9_x86_64.ipk
Size: 131641
SHA256sum: 79c79156a6628865065a5867d46579a65f4b80f7ed049a25b52a77636b56a90d
Description:  mcproxy is a free & open source implementation of the IGMP/MLD proxy function (see  RFC 4605) for Linux systems.
 It operates on the kernel tables for multicast routing and allows for multiple instantiations,
 as well as dynamically changing downstream interfaces.

Package: mesh11sd
Version: 3.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 92160
Filename: mesh11sd_3.1.1-r1_all.ipk
Size: 19073
SHA256sum: fe28941a7a4ccc33938ce420f23cd2b4ef7fe61f4f509337737179fbf28c4663
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon dynamically checks configured parameters and sets them as required.
 Upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: x86_64
Installed-Size: 30720
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_x86_64.ipk
Size: 7452
SHA256sum: a849fd176ff71b9b230773e44a6afe3def9deffad034ca18ea723d5915b043fb
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2853
SHA256sum: 2f7470dd02a55b9c7079ffb7932ebf276ebb401bae1d7c7f5c61ee74046c7af5
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: x86_64
Installed-Size: 92160
Filename: ndppd_0.2.5-r2_x86_64.ipk
Size: 34356
SHA256sum: 7ea0cc3dca6b83f2c3201eebab7cf2465028ccace64bac93c100f76ea224649d
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: x86_64
Installed-Size: 143360
Filename: nodogsplash_5.0.2-r1_x86_64.ipk
Size: 48376
SHA256sum: b988f30892da0d9e580c6d312b03ca600d3d049f06a642219787cc75138329e8
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: x86_64
Installed-Size: 40960
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_x86_64.ipk
Size: 11960
SHA256sum: 5acc1603330a370c57e7bd279f9644c870a6d16eaa5edcbdb032fc2653dc6ba7
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-arprefresh_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 2780
SHA256sum: 4e240968eb0db81e823dc47011ff50e3df3d9b58144a432f5df14251a34a9152
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-bmf_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 12992
SHA256sum: 1fbb69e1c39570fae1abb7329967e952a5a7210c1c24ccbd0b1e11307aa0ceb2
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 4471
SHA256sum: 3d093cde712a5b835987f198eebe70bed11bc31523d7446d7f4b3f9f05c01722
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 3097
SHA256sum: 58d1e435edf0c6446793244b1f5a94d0b0480a5439cff8d44961717e61c98eee
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 4836
SHA256sum: 854b502868198614abd8ffc6284a6ccb7310971766645b738fca00feba9639a1
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 3316
SHA256sum: d147b12d2c365a3d62e7e84ba4679928b9c3c3ed6b727e4695b87a977eb2ad47
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 31522
SHA256sum: f04b273a2d6cb8029739b17fba1fa6d0ba2c575447bb7f499608db90f4c30f25
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 23242
SHA256sum: a207ca1459e5438dc2a0d1541f45cd52ba805e317158762547365fdff8ebdcec
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-mdns_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 9963
SHA256sum: aeb7f4c5a6aa8580e76c8fba4093e04c124418ae53b36b01b950e0b201b5b634
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-nameservice_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 11697
SHA256sum: a2700f1b54a137d2a61d9661f2b1f8b0e80b469d79080b7e0b4fceab80132922
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-netjson_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 13900
SHA256sum: a0f44ed6534ddecbf5d7f57d475b3cc7eb21dcf015aee59618d63598ffd344da
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 30720
Filename: olsrd-mod-p2pd_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 9426
SHA256sum: 5b68a4a0c13b0a4a891b615ca1b730451d934edb10465ae0b5c303a72a10c6e1
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 3698
SHA256sum: 496c951e6fccf8df160dabdd1e5bdcafcc1f646be28c44ba07fb71e307e8d9f2
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 194560
Filename: olsrd-mod-pud_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 62550
SHA256sum: 9e886152a76a722afb5ecc77b90b41becda7bcdb531b756b4678e593ae51bb5c
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 30720
Filename: olsrd-mod-quagga_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 7110
SHA256sum: 8fecbbb3116d7ed8ca6f5ecff5dfa2d0b2c57f82606d119c2c6932eb593531ec
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-secure_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 10715
SHA256sum: 9bb40bbaa3ab73e16e46a01d358877bed5eb74c42addbbaf3498448563eec5e6
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 5334
SHA256sum: 5f19e43a9b3085b6fb74d5d7e3e03569d5483323ad6d27864df01d3c38f39156
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 15299
SHA256sum: 16a847a3d2addcdc5809989d3284b7903acd048ca2bf945ff3bb3edfbf5f9e93
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-watchdog_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 2438
SHA256sum: ccb0ff6c5f19ab0e745c3875e3eac8e3de845f3e715c9e469394c19bf9c3b7be
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 10240
Filename: olsrd-utils_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 1945
SHA256sum: 3a033673ec717c8866ca0324cee66df40aac900b51b4e41b5843b7a92f86d61f
Description:  Utils for OLSRD

Package: olsrd
Version: 2023.06.12~a9b3f1ac-r1
Depends: libc, libpthread, libubus20231128, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 327680
Filename: olsrd_2023.06.12~a9b3f1ac-r1_x86_64.ipk
Size: 139721
SHA256sum: bd62821b0bf84c71772ad54d41ca862a88a94ea59e8c0f38a62654f59515de16
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 450560
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_x86_64.ipk
Size: 183114
SHA256sum: b9a8db32fc6a368f2c3566d945cf9b8146c2ccc51fe7b1dd60c54d5dba30fcaa
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 440320
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_x86_64.ipk
Size: 177670
SHA256sum: 98eb2d4b74712be1558d4bca9c66a1b883c8cd4d968bde2d4e23f3578e062474
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_x86_64.ipk
Size: 2302
SHA256sum: a2c99c6fd228323d838167672586b529d98186b51527f79be95fd8e6dfccd72a
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 645120
Filename: oonf-olsrd2_2022.08.25~1cec9b21_x86_64.ipk
Size: 259899
SHA256sum: 310bc0f647911ef2ec895ffa62f7b71540d3bb08eb6d8025171638383f73cdd3
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.2.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: x86_64
Installed-Size: 563200
Filename: opennds_10.2.0-r1_x86_64.ipk
Size: 159220
SHA256sum: 4ec24715c1b555f98093a37e7705d4c662d9aa6bae913fbe93ec55f03f04fedb
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: x86_64
Installed-Size: 204800
Filename: pimbd_2018.06.19~dbf4e591-r4_x86_64.ipk
Size: 88729
SHA256sum: c259577ca182e6ac522cde17793d03c86e57e6f9fd1ac70f38abe26cea9249da
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: x86_64
Installed-Size: 112640
Filename: prince_0.4-r3_x86_64.ipk
Size: 31257
SHA256sum: 4562981cefc6b70f8fefc4bf95e24906127e37a75225e61466b059030bb7b0a6
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 40960
Filename: vis_2013.04.07~7710cce4-r9_x86_64.ipk
Size: 11661
SHA256sum: 76a6e1877dd0c3b27d55daed43f2ec599932053e51b00647a528c405a7c9eb7e
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: x86_64
Installed-Size: 30720
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_x86_64.ipk
Size: 9722
SHA256sum: b67ca25a8d40f9374e6bb1dc2290ed79c4ed9edd2383274cc26b979adb436dd5
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.